Search results
-
Eleaf GS Air Fan
Hi all, I've had a read through this thread - well actually up to page 27, some of the 560's and the last three pages - it's the best I could do - so apologies if I'm asking for information that's been covered. I'm after a MTL clearo for my partner for her iStick 40. I've been out of the...- smokin909
- Post #14,456
- Forum: Tanks and Replaceable Coils
-
Sigelei 150W or Snow Wolf 200W? (wattage only comparison)
You're welcome. Based on these numbers and their proven build quality the Sig 150 is my choice as well. It basically runs within acceptable accuracy at 0.4 ohms up to 80w - 0.2 ohm up to 70 which works for me. Just an FYI the Sig 75 in wattage mode was on point across the board from 0.2 - 0.8... -
Sigelei 75W V. IPV D2
:thumb::thumb: I'm a noob to all these new regulated devices as well :) I've been using mech mods for the last year almost exclusively. I agree, price, build reliability, customer service, aesthetics etc - it all forms part of the picture that helps us to decide based on our various wants and... -
Sigelei 150W or Snow Wolf 200W? (wattage only comparison)
Here are the wattage charts results that Dirk Oberhaus measured. These are the wattage mode specs only. His TC results for the Snow Wolf are not in a table format summary but you can see them being outputed in his videos. Snow Wolf 200w (wattage mode specs only) Sigelei 150w I'd love to see... -
Sigelei 75W V. IPV D2
Here are his Wattage measurements table - I can't understand his commentary, but these numbers look okay? It will be interesting to compare to the Wattage mode for the ipv D2 when those ones comes out. He has measurements for the Sigelei 75w in TC mode but not in a chart format. You can see the... -
Goblin Mini build question
The second video in my post is more a comedy show procrastination break. The first one is really good, he goes into nice detail about the tank - the rebuilding aspect is clear and makes a good point about checking your coils in relation to the chimney - as there's not a lot of room there and you... -
Goblin Mini build question
Yes I think you're right mtbason35 - I did some more digging and I think I've nailed it. Not one leak so far and the spitfires have ceased to attack me! I do love this tank, so happy I've got the build down. Here's the video that i really liked and followed his wicking process - I cut my wicks... -
Sigelei 150W or Snow Wolf 200W? (wattage only comparison)
That's actually very good food for thought. Tbh, the only con for the regular Sig 150 that is almost a deal breaker for me is that it only reads to the tenth, but as TX Biker said, the amount of people who report they work and work well, day in and out is enough to keep me interested. I like... -
Sigelei 150W or Snow Wolf 200W? (wattage only comparison)
Hi all, I'm looking to buy a dual 18650 VW device and have narrowed it down to these two. I'm after a reliable high wattage device with good battery life for my RDA builds that range from 0.3 - 0.7 ohms. I'm keen on the Sigelei as I've owned one before and can attest to their reliability. I... -
Goblin Mini build question
Thanks carnage for the tips :) I'm going to use 2mm ID 28g with no twists - keep it simple and trim the wicks up at an angle and hopefully using plain kanthal and not twisted will also resolve the spitting and popping. I also think I've figured out why my second build leaked - I literally just... -
Your favorite custard?
Here's my quest for the perfect custard so far: Charlie Noble - liked it but it was my first custard and I need to go back an revisit now that I'm more 'experienced' with custards. From memory - just the right amount of sweetness without being sickly. Nicely balanced vanilla custard. Digby's... -
Goblin Mini build question
Can't remember if this was a 2mm or 2.5mm ID View from top down with chimney on: Side view of each wick end: Frontal view of coil position in relation to airflow channel: -
Goblin Mini build question
i bought this a few days ago and I love it. Nice finish and build. Good airflow options, Perfect size for my needs, looks sweet on all my mechs and I love the flavour. I've been using rdas for almost a year and a Kayfun so this has been my first new rta for a long while. I build single coils on... -
Is it steeping....?
I've found those three so far - Outerworld, Van Vapes and Vagabond - thanks for the link I'll check it out. Outerworld in particular has a few flavours that are really good, the Van Vapes Custardy is really good - I haven't tried their other flavours and I'm going to sample Vagabond soon when I... -
Is it steeping....?
I've added 'aging' to the tags ;) Not to further confuse the issue - Is adding nicotine to a pre-made zero nic e liquid 'blending', 'steeping' or 'aging'? -
Is it steeping....?
Well it's funny you should say that - I'm in Sydney atm. I just got package I had in storage in the U.S. which also has three bottles that have been sitting there for two months. I haven't cracked the seal yet so I'll be able to actually do a test as per Hurricanegirl - vape right now - put away... -
Is it steeping....?
Thanks for that - I see what you mean. I completely agree that over a long period of time the flavourings break down. I had some small bottles left over from my Halo days of early 2014 that I came across when doing a clean out. Let's just say they're out the door now. The colour had gone really... -
Is it steeping....?
Can you explain this further? Sometimes I'll read a company's description of a juice and it says 'recommended steep time X days/weeks'. I usually will break the seal, open it up, suck some air into the drip tip, push the air back into the bottle, close it and shake it. I'll put it in my juice... -
Is it steeping....?
...from the moment the juice is bottled and sealed, even if the bottle has not had the seal broken and just sits there? OR does the steeping actually begin from the time when the seal is broken? (Im referring to juice that does not come pre-steeped). -
Advice needed for small VW device
Agreed, definitely not for sub ohming and sub ohm clearos. I spent a good two hours with it running my rda with a 0.6 ohm build on it at 30 watts. I was doing restricted lung hits with the 0.6 ohm rda. This is not the device for that. It worked fine - but I felt I was pushing the device for sure...