Search results
-
-
Mike n Tibs DNA Mods!
jajajaja, those look real nice. I'll be spraying on too. In any future 3d print mods, I'll be getting white and use acrylic paint and poly spray. Huge range of colors and I'll be able to get my Picasso on.- bilboda
- Post #2,350
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Reminds of the wooden tables I've seen with umpteen coats of polyurethane. Seemed like 6" of finish before you got to the table top.- bilboda
- Post #2,348
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Acrylic paint is so darn easy to use and very inexpensive. I sanded my 3d print just a little and the color came right off. Used a foam brush to apply the paint. I will seal with polyurethane spray. Idea from mamu. Maybe next time, I'll try something artistic. I'll have to google it though...- bilboda
- Post #2,344
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Nah, using magnet wire for the leads with insulation removed in the disk and at the posts would yield instant heat at low power. If the copper can handle the stress, that is. That would leave ample power for your ultrasonic thingy. The mist could be released into a ceramic cylinder shaped to...- bilboda
- Post #2,278
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
With an Istick 40W TC at 26.99 currently this may be my last device for a while. I think I will wait for the DNA1000 with integrated coaxial 510 center pin for thermocouple connections with humidity sensor and juice injectors in compatible rta's.. I'm thinking a ceramic disk with imbedded...- bilboda
- Post #2,274
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
At gearbest for 120.00 with coupon, :( I don't know the code whoops, see above- bilboda
- Post #2,272
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Just makes want to go back to bed.....- bilboda
- Post #2,267
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Hcigar pricefixes. Maybe log in on Gearbest and get a prebuy price? I have it from a good source that they are 110.00 wholesale b4 shipping etc from China- bilboda
- Post #2,248
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Or the price which is being price fixed at retail.....expect around 200....:censored:- bilboda
- Post #2,192
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
But but but, it's not just a cellphone. My camera takes hdr images and is capable of 4k images and video. Some stunning macros are possible . I get macro and telescopic lenses on the cheap from fasttech. My unlimited 4g can be wifi tethered, unlimited and used as backup for when my regular...- bilboda
- Post #2,124
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Just got my Blueridgedog print for the smaller Turnigy 1000 mah battery. Did some sanding and the color came off in spots as well.. Got some matching acrylic paint and polyurethane. Put the paint on,(so easy, no mo spray paint for me) and started worrying about yellowing of the polyurethane...- bilboda
- Post #2,109
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
ooGoo is still messy but a whole lot cheaper and this guy explores several other alternatives... http://www.exisle.net/mb/index.php?/topic/68292-homemade-silicones-and-castingrepair-compounds/- bilboda
- Post #2,065
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
Well, you are back to needing that relatively fat tip but the real problem is the wires are attached to the battery. They are live at all times. You must do this one at a time. The unsoldered wire must remain fully insulated while you solder the first one on. Then, as you solder the second one...- bilboda
- Post #2,009
- Forum: Battery Mods
-
Mike n Tibs DNA Mods!
I find a fat tip helps immensely in many situations, including soldering thick wire.....- bilboda
- Post #1,913
- Forum: Battery Mods
-
-
Mike n Tibs DNA Mods!
You could try jumper wires in the right configuration if you can't get that balance connector off. I've done that with an spdif connection to a motherboard. The end with the female connection could have wire jammed in tight or use pins soldered on. The other end would benefit from some...- bilboda
- Post #1,868
- Forum: Battery Mods
-
Yihi SX350J Technology Discussion Thread
Got the sx350j on sale and the I bought this 3d printed mod,sled, and fat daddy 510 for 35+ at vaposphere. A few bits of wire and a chip (sold at the site) and you're golden. They print the mod themselves, while this pick is HDR and doesn't reflect how it shows up normally, I'd recommend the... -
mech mod getting warm/hot?
One of the features of the Sony VTC5 was it's ability to withstand the higher heat levels the battery generated during high amp use.. Vaping shouldn't get you there though. When you use lower ohm builds you have the risk of approaching the resistance of the mod itself. Heat gets generated at...- bilboda
- Post #6
- Forum: New Members: Introduce Yourself!
-
Mike n Tibs DNA Mods!
1 down, 3 to go. Made an honest mod of my clone- bilboda
- Post #1,310
- Forum: Battery Mods