Search results
-
Ithaka official
Well I am at a loss at think I need to set it down for awhile. Thanks again for the suggestions. -
Ithaka official
So this time when I tore it down I did so careful. Attached it to my genesis device and both my provari and my separate ohm checker read it at exactly 1.5 ohms, rather than the .2 ohms the separate ohm checker read it when it was on the ithaka. Anything on my rebuildable part or base I should... -
Ithaka official
Thanks gtbb. I tried going down to 3 volts and it still didn't work. Tore down and tried this time with a welded 32 and 30 gauge. Same thing happened the joint broke. Not sure where to hold it to put the least amount of pressure on the weld. Just not my vaping day, happened a month or so... -
Ithaka official
Was hoping for a few suggestions. Was rebuilding one of my Ithakas and for the fourth time I get a E1 error on my provari. I put it on my ohms checker and it reads .2. My last build it read .07 on the ohms checker. Not really sure how/why. I am using welded wires, and they always read 1.5... -
New Calculator to try
Thanks HotRod. I was able to get my percentages to match up with the ejuicemeup once I realized I needed to set my flavors as 100% pg. I really love your calculator. Being able to see the cost of juice made right there as been a major motivator. Also, the ingredient list is great. After a...- LongDraw
- Post #13
- Forum: DIY E-Liquid
-
JUST TOBACCO, no perfume, no caramel, no vanilla, no tba
Howdy, So I have made a note to pick up some RY1 when it is in stock. Wondered if anyone had tried Hangsens Pipe Tobacco and their Parmal? Also any other suggestions? After having gotten my set ups all in order I figured the only other thing to really tinker with now is DIY, so here I am. I...- LongDraw
- Post #382
- Forum: DIY E-Liquid
-
New Calculator to try
So I just added my flavors to the list (just ordered a whole bunch more to play with last night) and made a second concoction (so far I have come up with Nutty Jack and Earls Fruitea) I really love this calculator. Besides getting to save my flavors, another big plus is getting to save notes...- LongDraw
- Post #8
- Forum: DIY E-Liquid
-
New Calculator to try
So just downloaded the new calculator last night. Unfortunately I am new to this so may not be the greatest help on feedback. So far I really like the calculator, love being able to add flavors, notes, costs. Only question I have is I have marked my flavors as "Other" so there is no vg/pg...- LongDraw
- Post #7
- Forum: DIY E-Liquid
-
Ithaka official
Haha, my twisting days are done since I got this. I was looking at the solder stuff, not sure but looks like more than I can do at this time. Right now I actually used some tin foil booties on the alligator clips, after gently filing the solder in there and that worked great. Need to do some... -
Ithaka official
It is a great device. Right now kinda frustrated because the fused part isn't as sturdy as it was initially. I think I need to scratch the clips to make them more flat again. I have been trying to find non serrated alligator clips, but not sure if they exist. -
Ithaka official
Hey Sub, I have the TSAF+ and it works great. Just make sure to follow what the instructions on the included sheet say. For the most part, only have about 3mm sticking out from the alligator clips, and only fuse about 1 mm of the wire. I use 30 gauge kanthal and 30 gauge nickel, so I use... -
Natural Tobaccos
Yeah, next time I order an aro I am gonne get the peach. Smoking cherries was great. For myself I am trying not to order a flavored aro unless I am gonna vape it at a decent pace. I noticed my smokin cherries quieted down some as it aged. Still very good, just less cherry. Dang, no I think... -
Natural Tobaccos
Floral. That makes me happy. Mine is coming in on Monday or Tuesday, along with some peach house blend. Not sure if you tried these, but I get a floral taste from Huntsman (Heathers Heavenly Vapes) and Patriot (GoodEjuice), is it similar to either of those? I really like those. -
Ithaka official
How much does the ithaka hold in short mode? Still trying to decide whether to pick up a telescopic mouth piece, espeically since i have my odys. -
Ithaka official
Thanks again. I had seen that thread before my tsaf came in, after a few pages it turned into them making one with camera flashes. Hopefully the higher charge works out, plus I stopped being lazy and started wiping the wire end with alcohol to clean again, that may have also just been what I... -
Ithaka official
Thanks dw. I may have to try, I use the TSAF and have it set on 3 which I think goes with 30 gauge. Gonna try fusing a few at the 2 and 4 setting just to see what happens. EDIT: So I tried at the 2 and 4 setting as well. The 4 gave a def louder pop, louder than when a good connection is... -
Ithaka official
Hey all, Thought I would post here rather than starting another thread. I am fusing my own wires using 30 gauge kanthal and 32 gauge nickel. I have been noticing, primarily on my penelope, the ohms will read much higher sometimes than they should. Once, when I just had the rebuildable part... -
Point me into a direction??
Wow, that must of been some amazingly strong juice. I bought a cobra and used ss mesh when I first started vaping, and then got into the gg/silica attys and the cobra has just been sitting. Not sure but you could look for a new/used ody/peny/ithaka. I have all three and all of them work...- LongDraw
- Post #7
- Forum: Rebuildable Atomizer Systems
-
Point me into a direction??
If you still have the penny, have you washed it out and either bought a new ceramic or used a torch on the ceramic. I have used coffee flavors in my ody and never had an issue with cross over after just rinsing them out.- LongDraw
- Post #4
- Forum: Rebuildable Atomizer Systems
-
Natural Tobaccos
Really interested to hear what Sahara and Dulce Cubanito are like. They weren't available when I ordered about 2 weeks ago, and thinking about making them my next order.