Search results

  1. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    @EDO - i understand your concern. but, the tutorial i'm presenting to you, is the basic principle of the method. you can do what ever you prefer, but just stick to the main principle, which is: make the loops even. and make the mesh even. than, make it fit not so tight, but not so lossy. also, i...
  2. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    maybe this can help you: inch/mm CONVERSION CHART
  3. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    sorry, i missed that question:) well, first of all, you can use what ever you want to widen a wicking mesh. i mostly use a toothpick which is 2mm OD, to widen a mesh which was (before widening) rolled around 0.5mm needle. when i put the toothpick inside the mesh, it will expand it to around...
  4. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    @mogium - you can use a nail, or anything similar. i used a drill bit (in the tutorial) just as an example. @TBinAZ - glad to hear that, and yes, it's the most important that it actually works:) @EDO - it's not about spacing between the loops, or how many lops a coil has, or what's the ID of...
  5. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    @Durangler - huh, thnx bro. that was stimulating:D my problem is that i don't have much (at all) chances to practice my english, verbally. @ckone180 - just take your time, and carefully fallow the instructions:) it could seems difficult for a beginner, but once you master the method, you'll be...
  6. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    @Steelvap3 - there is no coating unless you heat the mesh on upper (yellow) part of flame. so, kip it to the bluish part. @kwalka - i guess. so, anyone new tried it? can you report results? btw, there is the video on the bottom of the first post.
  7. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    glad to hear that, mate. it's because the pressure between mesh and wire is reduced, so electricity finds less resistance through the wire - like water. also, when you first make loops of wire on a drill bit, it takes even shape, so it heats equally in all parts. of course a mesh has to be as...
  8. petar k

    How to make an unoxidized, hot spot free and cleanable coil

    ...first of all, you will need a "Genisis" type mod:) and: from left to right: ~5cm 0,25mm NiChr/Cekas/Kanthal wire, 10x20mm 400 mesh, 2mm, 1.5mm and 1mm borer/nail/needle... (in the rest of the text: "tool"), and tweezers. (1mm needle is not on the picture above) part 1: wire coil...
  9. petar k

    SmokeFreE-cigarette on "Alcatraz"!!!

    haha, you was faster than me... Alcatraz series e cig comercial -cut.avi - YouTube one more step to mainstream. "the best thing in this century, so far". viva e-vaping
  10. petar k

    Ever hear of e-SOLID?

    i tried id today (Cohiba 24mg). directly "dripped" on the coil of my A2 atomizer. the taste is superb, actually, like real Cohiba. it's printed on the package that it is "Extract from Pure Esential Oil" which means "squeezed tobacco", i think. it doesn't last much longer than regular liquids...
  11. petar k

    How to "wake-up" my "dead" LiIon battery?

    i would buy it "yesterday" if i could find it here.
  12. petar k

    How to "wake-up" my "dead" LiIon battery?

    i'm using it in serial connection with protected one. i'm aware of overcharge/overdischarge and +/- short connections. btw, does using it with the protected one, means safer usage?
  13. petar k

    How to "wake-up" my "dead" LiIon battery?

    thnx for the effort, guys. just to say that i removed PCB and the batt is working now. btw, the batt was in frizer for around 1h at -5C, however, i'm using it now:)
  14. petar k

    How to "wake-up" my "dead" LiIon battery?

    just to say, the batt is working now:) i removed PCB and it's all fine now.
  15. petar k

    How to "wake-up" my "dead" LiIon battery?

    all is described in the earlier topic here: http://www.e-cigarette-forum.com/forum/new-members-forum/181766-how-wake-up-my-dead-liion-battery.html
  16. petar k

    How to "wake-up" my "dead" LiIon battery?

    @Rui P - i have no NIMH charger, i have just "regular" one that i charge LiIon-s on. it's some multi charger for different sized LiIon batteries.
  17. petar k

    How to "wake-up" my "dead" LiIon battery?

    as i said in that topic in newbies section, i have already googled for some tricks, and all i found was about lap-top batteries. can you tell me how to do that? plz
  18. petar k

    How to "wake-up" my "dead" LiIon battery?

    sorry, can what?
  19. petar k

    How to "wake-up" my "dead" LiIon battery?

    ...since i'm "new" here (with posts) i had to open my topic in newbies section, so i'm "moving" it here (if it's ok by admins). http://www.e-cigarette-forum.com/forum/new-members-forum/181766-how-wake-up-my-dead-liion-battery.html i'm not satisfied by those answer, and i believe we can...
  20. petar k

    How to "wake-up" my "dead" LiIon battery?

    the problem is that i have no second PV to vape. i have already ordered two batteries, but, it's weekend and Easter is coming, so postal offices doesn't work here until Tuesday. so, i'm desperate to bring this battery to life.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu