Search results

  1. Filthy-Beast

    Thinking of Taking the Plunge

    You can think of the Reo as an nearly indestructible battery holder with a built in dripping from the bottom system. The vape you get is all about the RBA and the build. Blending chamber size, coil build type and ohms with air flow. This allows for any kind of vape you desire from massive...
  2. Filthy-Beast

    REOS in a brick and mortar

    I know in the past Rob has said he does a fair amount of business through B&Ms and has done custom paint jobs for some of them.
  3. Filthy-Beast

    RM2 LP Shorting out

    It's the same, I've used the handle of a file and a metal nail file before to remove that center post. You need to jam something in the 510 center hole that will bite on the sides and allow you turn it. Since your deck moves my guess is the positive post and possibly that center pin is loose...
  4. Filthy-Beast

    Thinking of Taking the Plunge

    Hey, welcome to Reoville. They are tough and I keep them my pocket all the time. Yes different RBA will perform differently and some tend to leak more than others. General rule, larger the air hole more likely to get seeping from condensation inside the RBA. As OB mentioned typically not a big...
  5. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Aww Shucks :blush: thanks
  6. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Ooh Ya, there it is. :hubba: Starry Night is going to look killer with a black Nuppin on it :headbang:
  7. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Looks great! Mark I'm sure you're going to love it.
  8. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Here's hoping you're flooded with PMs :D After you get to mine of course
  9. Filthy-Beast

    REOS in a brick and mortar

    They were at a vape meet in Chicago last year and had them in their booth
  10. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Photo galleries are here for your viewing pleasure GlassGal Pdib Galleries home Page - BigAperture
  11. Filthy-Beast

    Woodvils finish sanded pics

    The older woods have 5amp fire buttons and 3amp on/off electronic switches, those ratings are at 12 volts and since we only drive them at 4.2 volts max you can push on those limits a bit .7 is very safe and I wouldn't go below .5 ohms. the new ones being mechanical instead of electronic will...
  12. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Hi GG, great to see you back! I think you really like the Nuppin, works great with single coils or duals, produces tons of flavor, squonks and drains super easy.
  13. Filthy-Beast

    To mill or not to mill?

    Personally I don't think it's eyesore, but that would also depend on the RBA and Mod finish I would think. I use many RBAs that would fit a regular Reo fine but I like the look and flexibility of the LP better. Your chosen RBA the even the RM3 will work fine without the trim, so you have no...
  14. Filthy-Beast

    My new Pals

    congrats on great looking set of Reos and Welcome to Reoville. The copper will darken to almost black over time if they are not clear coated
  15. Filthy-Beast

    ReadyXWick - Round 2

    I use a pencil torch after dry burning, it might also be useful to get some cleaning done when you cannot dry burn the coil.
  16. Filthy-Beast

    Woodvils finish sanded pics

    Here's the prototype. The wires are not a concern as long as the gauge is thick enough there is no functional difference between a wire and a metal plate. The firing button is a mechanical connection and not an electronic switch. Flat top batteries will work fine in these.
  17. Filthy-Beast

    How to preserve the beauty of the Woodvil?

    As Karen mentioned it very important to get a good treatment on the inside of the Reo and back of the door, especially if the outside is poly coated. The bare wood can absorb more moisture that the finished outside which can lead to warping. I personally prefer the feel of oil / natural finish...
  18. Filthy-Beast

    Woodvils finish sanded pics

    Let the games begin :D hopefully those Packer colored ones attract a lot of attention away from the rest
  19. Filthy-Beast

    Woodvils finish sanded pics

    If new to RBA atties the RM2 is the place to start, easy to build on, great performance with a flavor profile that is hard to beat at a killer price point. What coils or ATTY do you currently vape and at what settings? This will help us point to the right RBA. I was a regulated mod dripping...
  20. Filthy-Beast

    I'm thinkin' maybe we should try this again? . . . . and you kids should behave yourselves

    Hi, how's the bee doing? I'm recovering from two grueling weeks of travel with all day meetings followed by drink into the wee hours each night, not as young as I used to be :facepalm:
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu