Search results

  1. drunkenbatman

    First 5 posts

    Wait, since when is being a robot against the terms of service? Was State O' Flux grandfathered in or something? Also, welcome. What're you currently using to vape?
  2. drunkenbatman

    Reccomendations

    I'd avoid the smok xpro, cloupor mini & ipv3 at the moment, but otherwise it's a pretty wide market. I'd stay away from mechs until you know what you're doing, and look at something like an IPV2 or Sigelei. You didn't say what you were after in terms of an RDA, but for clouds and ok flavor I'd...
  3. drunkenbatman

    50% Fire rate on rebuilding PT2 tanks

    Brandon has a good point, I just sort of assumed that was sorted since you were clipping before you had the pin in to have them be short, and was silly of me. If you aren't able to clip close enough, you can get pretty close and then file them down.
  4. drunkenbatman

    Moving Up To The Big Boys

    I'm going to let others recc eliquids, but I wanted to give you a heads up that while the Halo Tritons and G6 are fine, they're mostly sold to those not knowing any better at a large markup. They're old Kanger tanks manufactured with a different threading on the bottom so they are less...
  5. drunkenbatman

    50% Fire rate on rebuilding PT2 tanks

    4-wick? Those aren't generally what are used for this, assuming it's the fasttech ones that's four 1mm wicks with the wire around them, as opposed to a single 2mm wick with the coil around it covered with a flavor wick, or single 3mm wick. I'm not entirely sure it's the cause, but I have a...
  6. drunkenbatman

    50% Fire rate on rebuilding PT2 tanks

    What gauge of wire are you using, and at what ohm? And how old are the coils you're using? You're most likely getting a short, and for what it's worth I do these as microcoils and only have had issues with shorts when experimenting -- getting the wicking right is usually the issue. Clipping the...
  7. drunkenbatman

    Ni200 tips

    Grade 1 is the easiest to work with/form cold, as it's the softest. It deals with corrosion the best as its the least reactive. Grade 2 has O2 dissolved into it, enough to where it's considered an alloy or a mix of titanium & titanium dioxide. Once you start getting into grade 3+ it becomes...
  8. drunkenbatman

    Question about RY4 ejuice vs UJ's Jon Wayne

    Well not necessarily, but to an extent? That's what I was getting at in the other thread -- some flavorings have more of a throat kick than others, and there are only a few aspects to eliquid to get throat-hit (PG, nic, flavoring). e.g., caramel and other types of things smooth things out...
  9. drunkenbatman

    First post

    42 Also, welcome!
  10. drunkenbatman

    Is there juice out there to worry about

    Seconding and thirding much of what has been said above, but will also add that right now it seems wise to stay away from organic flavorings, for two reasons: 1. They straight-up murder your coils and wicking. They don't "vape" like you'd expect, and end up kind of cooking/caramelizing onto the...
  11. drunkenbatman

    Question about RY4 ejuice vs UJ's Jon Wayne

    Yeah, MFSs RY4 is just fine, it's really hard to go wrong with those and its very similar to dekangs/hangsen. You do have to realize you'll never get the throat hit with something like that compared to something mixing in cigar flavoring or a scratchy tobacco. :) Lots of sites will allow you to...
  12. drunkenbatman

    is anyone else having wicking issues with the kayfun v4 clone (fasttech version A)?

    Wow, that is a little counter-intuitive, I'll have to think on that when I'm more awake. Sincere thanks for coming back and sharing your solution to help others. And I agree, we should hang out more. What're you doing Thursday?
  13. drunkenbatman

    so that drunkenbatman will return my cat....

    Hey mate! Some really valuable work, most of these are these notes are designed to either (A) document some info for others, but mostly my brain (B) shake out possible ideas in your head (C) Have you stop PMing me for them. :) [1.] Video of that stuff would always be cool, as it's one thing to...
  14. drunkenbatman

    Ni200 tips

    InvisibleHandy will probably find this thread soon, you'll know when all the birds go quiet and exclamation points appear. Don't make sudden movements and you should be fine. In addition to the threads mentioned above, there's info in these too...
  15. drunkenbatman

    Battery charging safety: Wall charger vs micro USB

    The i2 does 500mA x2, so each battery being charged gets 500mA. On the i4 it does 750mA in paired bays (or 1&4) or otherwise 375mA (it's working with 1.5A). You also have the case that not all power sources are equal, so your computer port/wall adapter might not be putting out 500mA but rather...
  16. drunkenbatman

    Hello

    Hi accepted, welcome mate! How long have you been vaping, and what's your current setup?
  17. drunkenbatman

    Kanger Subtank RBA Pre-Built Coils Opinions?

    Go and search for "pre-coiled wires for rebuildable atomizers". There's kanthal and nichrome in a variety of diameters and ohms. And yeah, you want kanthal. You're also going to have to do a lot of learning, so I'm going to send you here...
  18. drunkenbatman

    Higher Resistance Coils For New Starter

    Hey mate! Just to save you a bunch of cash instead of new tanks, etc., check out: clonecores . com I've used the older single-coil style with great success. The guy basically cloned 'em and is having them made to his specs and then selling them via ebay and there. At 10 for $10 for 2.4ohm...
  19. drunkenbatman

    trusted sellers

    What daleron said, but for batteries specifically your best bets will be RTD Vapor and Illumn for knowing what you're getting is legit as well as a decent price.
  20. drunkenbatman

    IPV 1 35 w and Kanger Subtank

    Nog, I'll save the OP the research as it's 0.3 ohm. :) That's the 1st thought that went through my head too, so you're in terrible company. I know some of the V2s would just randomly turn themselves off... OH... ...OP consider disabling the touch sensor by holding down the - and power...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu