Search results

  1. drunkenbatman

    No Flavor

    Hey mate, welcome! Sorry for your troubles, both with the tank and being Canadian. I'd try these two things, and report back: 1. Lowering the wattage. 2. Closing down the air flow vents for a tighter draw. 3. Try taking a slower draw with less suction. 4. Give it a few primer puffs (sucking...
  2. drunkenbatman

    Hey! Newbie Here!

    1. Welcome! Madison is a gem of a city. 2. Rsunderl is off on the specifics here, but super right to point out the 1ohm limit. There are two coils for the subtank (and it comes with both), 0.5 and 1.2ohm. The istick will work with the 1.2ohm, but it will be happiest (longevity) and get its max...
  3. drunkenbatman

    Kangertech Subtank Not Working

    Listen to Undies -- he's got you covered nicely, and from what I can tell even tucked in the sheets. It's a good tank, you just didn't understand what you were buying or how it connected with your equipment. Three additional notes, not in order: 1. Don't put that on an ego. It isn't good for...
  4. drunkenbatman

    Sony factory burnt down?

    Hey mate, What appears to have happened is that they still make them, but it's hard for individuals to get them. They had to close one of their battery manufacturing facilities due to Fukushima, and while they've built a new factory (phillipines or south america, can't remember) like...
  5. drunkenbatman

    My Cole's notes

    Wait, wasn't he dead and hacked to pieces? Either way, welcome mate! We can start small and get you to your 5 posts. :) What's your current vape setup, and what'd you start with?
  6. drunkenbatman

    Battery Confusion by a Newbie

    Hey mate, welcome! Two things: 1. You're wise to have done your research and then look for confirmation of what you think you know, that'll serve you well with ecigs. You even knew they weren't 35A. You've made my cockles all warmed and stuff. 2. The Atlantis (unless you rebuild) will be...
  7. drunkenbatman

    Manhattan Mod Clone Threads

    Aha, awesome! So glad it wasn't cross-threading, you had me worried when you said it was going on unevenly. Thanks for coming back & sharing the solution. *gives the horns*
  8. drunkenbatman

    Manhattan Mod Clone Threads

    Aha, awesome! So glad it wasn't cross-threading, you had me worried when you said it was going on unevenly. Thanks for coming back & sharing the solution.
  9. drunkenbatman

    Well, my mechanical mod went BOOM.

    Manufacturing defects are also a concern. There are stories of people picking up mechs from decent sellers (including suppliers on this site) and when they checked the end cap realized the vent notches weren't cut, or if designed for top-venting it was blocked, and had to get a new one sent. If...
  10. drunkenbatman

    30w Battery Drain on Atlantis

    I'm not sure what he means either, but I'm sure with a rewording it'll make sense. ;) I'll second the Sigelei over the IPV3 right now. Any model can have some bad apples from manufacturing runs, but if you look around the forum and elsewhere while you'll see someone here and there having an...
  11. drunkenbatman

    How to steep?

    In general, a common way is to remove the lids and squeeze out the air (and then letting it go back in), and then leave the lids off for a few hours or overnight (I do overnight). The reasoning behind that is that some flavors are alcohol-based, so until the alcohol evaporates you can taste...
  12. drunkenbatman

    Anyone with sorethroat with Ni200 DNA40 builds?

    DNA40 expects and I'm assuming iis calibrated for nickel, but titanium has a different temperature coefficient. I'm asking if you notice less accuracy in say, singing here and there that you didn't with nickel, and if so does it seem ~20%.
  13. drunkenbatman

    Possible definite solution to the EVOD BCC leaking/gurgling problem

    Hey mate, welcome! Glad you seemed to have found something that worked for you, but I hope vaping upside down doesn't take off. ;) Because you have to have 5 posts to post anywhere in the forum, a few questions: 1. Are these authentic evods? 2. Do you rebuild your coils? 3. Are there local...
  14. drunkenbatman

    Anyone with sorethroat with Ni200 DNA40 builds?

    I know, that's why I said the only things differentiating Ni200 from kanthal is lower resistivity and that it's all-nickel! :) Hrm, maybe I phrased my original sentence confusingly. Neat, we were just having a discussion about that here, before a possibly-disturbed person became obsessed with...
  15. drunkenbatman

    Hello

    Hey mate, welcome! As I recall, those are clones of the Erikxyzcantpronounce. I believe they're originally allens, but three thoughts come to mind: 1. At some point in their lives they both had the same screws, and one got pair got lost and replaced with flat-heads. 2. At some point in the...
  16. drunkenbatman

    4 Vamos fail to fire IClear30, Am i just unlucky or are new vamos crap

    Ahhhh, well we can't make that decision for you but I really appreciate you letting us/future readers know what it was. *gives the horns*
  17. drunkenbatman

    4 Vamos fail to fire IClear30, Am i just unlucky or are new vamos crap

    Hey mate, sorry for the issue. The Vamo is OK, and the tank is OK, but I believe you're experiencing an incompatibility with the connections and it's not just the iclear30, the Kanger protanks would often have the same issue unless you used an airflow controller. Some places like discount...
  18. drunkenbatman

    Anyone with sorethroat with Ni200 DNA40 builds?

    Hey mate, welcome! Yeah, you have to have 5 posts under your belt before they let you under their belt. I'm too sleep-deprived to help you do a real differential diagnosis (you'll appreciate that), but two things come to mind: 1. Do you have any known nickel sensitivity? The only thing that...
  19. drunkenbatman

    Atlantis 1.0 ohm coils arrived today from Fasttech, so far so good

    I didn't ask you to dissect them, I asked if you'd be willing to inspect for differences and maybe take a few pictures. :) If you aren't down with that, no worries. Interesting, can I ask why are you confident about the clone coils? e.g., do you know what is in the clones? If you're confident...
  20. drunkenbatman

    Looking for advice on my battery situation

    First rule of tech: If you need it now. If you don't, wait until you do. Of course, defining need can be tricky. :)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu