Search results

  1. edyle

    Watt-Hour Shootout -- FullyMax 10Wh 900mAh 3S LiPo (for DNA200) vs 25R vs HG2

    Well if you are using TC mode, you don't really know what the wattage is.
  2. edyle

    Battery on Flight

    my guess is it was an 18650 batt tossed into a pocket of a bag along with keys and coins.
  3. edyle

    Joytech fans , not surprising at all actually .

    Joyetech has produced lots of various devices. The joyetech evic vtc mini I have certainly does not have a spring loaded connector.
  4. edyle

    Pros and Cons of wire guage sizes

    use www.steam-engine.org to compare the two. If you build dual 0.9 ohm on 3mm with 26 gauge and 28 gauge, you will need more wraps on the 26 gauge than on the 28 gauge. The 26 gauge, in this example would need a much higher wattage to run at. Coil wrapping 26 gauge, 12 wraps, 80 watts Coil...
  5. edyle

    Pros and Cons of wire guage sizes

    use www.steam-engine.org basically the fatter the wire, the more power you need to run it.
  6. edyle

    Do you need a mosfet?

    1: is a mosfet necessary. No. 2: tube mechs don't have them ; The typical tube mech uses only 1 battery, and has a mechanical switch with no wires. Many unregulated box mods have a pushbutton switch with wires running to it; those thin wire may get too hot if too much current is drawn.
  7. edyle

    Ipv3 ni tc resistance question

    How did you 'take the measure' ? The number appeared on the screen when you screwed on the tank? Your 0.15 ohm coil can go up to 0.3 ohm when hot.
  8. edyle

    Charging a mod.

    No. If you use a 0.5 amp outlet, it just means your mod battery will take long to charge. If you use a 2 amp outlet, the mod will only draw 1 amp max anyway.
  9. edyle

    Evolv sues Joyetech over VW technology !

    I ssaw something in the document under JURISDICTION, where they pointed to a Joyetech claim. here it is:
  10. edyle

    Evolv sues Joyetech over VW technology !

    I got that impression because US PATENT 8820330 is shown printed on a DNA200 board shown in a photo in the document.
  11. edyle

    Evolv sues Joyetech over VW technology !

    I think there is confusion about what is being sued and what was patented. Looks to me like evolve is suing over their dna200 patented chip. The dna200 chip is VW technology. Hence the catchy headline (designed to cause controversy as usual) : "evolve sues over vw technology" Meanwhile as...
  12. edyle

    Evolv sues Joyetech over VW technology !

    The patent in question is: U.S. Patent No. 8,820,330 (“the ‘330 Patent”) It seems to be the patent number of the evolve dna200 board.
  13. edyle

    Am I at risk of damaging my tank or coils?

    I always puff first. It's almost like taking a sip before you swallow.
  14. edyle

    Kanger T2 - max wattage/voltage

    Start low and move up gradually. When it starts to taste bad, adjust back downward.
  15. edyle

    Subtank TC Coils

    those old nichrome coils started at 0.5 and ended at 0.6 now you see a difference of 0.1 ohm here.... ( 0.1, .13 same thing) yeah.
  16. edyle

    Stainless steel.....power or tc?

    1: Why do tc mods offer a stainless steel setting: So that you can run steel in tc mode. 2: The wattage range printed on the coil is basically the wattage range corresponding to the right temperature. If you run a coil at the recommended wattage, - in wattage mode, when the wick goes dry, the...
  17. edyle

    How much last a charge?

    You still have not stated what difference of quantity you are talking about. Like I said before, one 18650 might vape something like 5ml of eliquid.
  18. edyle

    How much last a charge?

    What so much difference?
  19. edyle

    How much last a charge?

    Something like 5ml of liquid. more at lower power; less at higher power.
  20. edyle

    Just a wicking idea

    I rinse cotton out with hot water by just putting about 4 cotton balls in a regular kitchen strainer, and pour hot water over that over the sink, and leave to dry for a day or 2; that cotton goes in a Rubbermaid container and lasts me for months.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu