Search results

  1. edyle

    Why?

    It could be that you are attributing something to the battery when the cause of the difference might be something else. btw: mean or rms ? !!
  2. edyle

    Why?

    my guess based on that thoroughly detailed description :rolleyes: is you are using the zmax at a higher wattage than what is happening on your twist
  3. edyle

    I need help/advice with a few issues

    1: battery life. A typical battery these days has about 2000mAh; that is 2Ah; 4 volts x 2Ah = 8 watthours of energy. That amounts to 8 watts for 1 hour, or 16 watts for 30 minutes, or 32 watts for 15 minutes. So if you vaping at 40 watts, expect about 10 minutes of actual vape time. 2...
  4. edyle

    diy mech box

    Look for stereo speaker wire.
  5. edyle

    Spools of SS 316?

    https://www.fasttech.com/products/0/10016155/3969110-authentic-mkws-316-stainless-steel-resistance
  6. edyle

    Replacing Batteries

    If you mostly don't go over 12W then your batteries will be useable for a long time. If you on occasion go 20 to 30 watts, then those occassions will probably show up a weaker/older battery.
  7. edyle

    Tons of symptoms. What is my next step?

    5 watts is quite safe; Maybe you should try to vape unflavored for a while. I don't think you mentioned what your hardware setup is, although you did mention a vuse at one point? Are you using an evod type setup with ego batteries? or maybe a ce4 setup? twist/spinner? And are you vaping...
  8. edyle

    Stainless steel battery caps

    I suspect they're used by home rewrappers/rebranders.
  9. edyle

    DNA200 better charging solutions?

  10. edyle

    IPV D3 CONCERN??!!!

    The brown around the centerpin? That is definitely not rust. That is the insulator to keep the positive pin insulated from the negative 510 threadwell which surrounds it.
  11. edyle

    Leaving your battery in mod

    a few or few is fine. if you leave a battery sitting around for 3months, you might want to check the voltage
  12. edyle

    My post disappeared . . .

    Maybe you posted a semi private message instead of a forum message. For example, maybe you 'start a new conversation' instead of posting a new thread in the new members forum.
  13. edyle

    Tons of symptoms. What is my next step?

    Wattage. What wattage.
  14. edyle

    kbox mini rba help

    I bet the side of the coil that is black is the positive side. Hot leg. When wrapping the positive leg: Wrap the leg all the way around the post and back onto itself so that it makes a thicker leg.
  15. edyle

    It's the People Who Harmfully Attack E-Cigarettes Who Need to Quit - The Influence

    First paragraph, third sentence: "Pure nicotine, delivered via vaping," A variation of the "liquid nicotine" representation we saw last year on the likes of Dr Oz. The 'liquid nicotine' misrepresentation has now morphed towards it's intended target: "pure nicotine".
  16. edyle

    DNA200 better charging solutions?

    Well I guess thats why most people end up using 18650 type setups.
  17. edyle

    Glycerin B.P

    10%
  18. edyle

    TC60W temp mode problem

    when you press the fire button you might see the resistance go up; (it goes up on my evic vtc mini); if it does not display the resistance going up, well, it just means it's not displaying it live. you lock the resistance when the mod/coil is at room temperature; that calibrates the mod for...
  19. edyle

    My first build

    Mod range judging from what I see on steam engine.org for the kbox, I suspect you are better off staying over 0.7 ohms; they don't have the kbox70 specifically listed though. I usually keep wraps under 10.
  20. edyle

    Rda

    I'd like to get one of these velocities misself https://www.fasttech.com/products/0/10019922/4221300-authentic-ivogo-velocity-rta-rebuildable-tank Its got a visible well under the deck, so it's being called a tank. not sure if the insulator is ceramic though.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu