Search results

  1. edyle

    Coil Problem Kanger RTA

    You are probably just using the wrong wire and the ohms ends up being too low for your mod. Get some 28 gauge kanthal.
  2. edyle

    Question on VV/VW charts and max watts for coils

    Yes those charts are outdated. Back then most coils were made with pretty much the same type of wire. Nowadays, a much wider variety of wires are used for coils and many modern coils come with the wattage range printed on them or on the packaging.
  3. edyle

    Should I go rebuildable?

    If you are happy with your t3s, you should try out rewicking. I used to put in a rewicked coil every two days back when I used to use protanks. Not worth recoiling though, unless you are desperate; just dryburn and rewick a few coils once a week and swap out a fresh coil every few days. 1: how...
  4. edyle

    Almost all of my 510 pins are leaking now

    510 pin adjustments; yeah, that's something I wouldn't do. One thing I learned early on is not to interfere with that 510 centerpin connection. I wouldn't bother removing a 510 thread connector unnecessarily for months at a time.
  5. edyle

    vape produced is very harsh, why?

    based on your description I'd guess there's something wrong with your nicotine strength calculation. Try some 0 nic to see if that's the problem. (are you vaping 24mg or are you starting with 24mg as the concentrate?) (are you vaping 0.2 to 0.6 mg strength?)
  6. edyle

    vape produced is very harsh, why?

    maybe you're putting ten times more nicotine than you are supposed to . or maybe there's alcohol in your flavoring and it needs more steeping time.
  7. edyle

    Electronic failure due to vape

    When I bought my tv a few years ago, the place refused to sell it without a big surge suppressor thingy. I notice I do get lots of clicks and switching lights on that surge suppressor thingy; certainly for example whenever I plug in my kettle to make a cup of coffee or turn on my microwave oven
  8. edyle

    Back to a mech full circle

    A hybrid does not mean a custom made atty. Different mods use different tube threading, and the typical hybrid atty will fit one threading (of course) and not another. Meanwhile, nobody sells thread adapters, which would really be simple to make. Common tube threadings are: m20x1 m21x1 m20x0.5...
  9. edyle

    Extreme dry hit - every time!

    vaporesso target 75 vtc vtc: that tells me its a variable temperature control mod. ccell ceramic coil: that's a very new type of coil. check out youtube for that setup. as a general rule, you can start low on the settings on your mod and move up slowly. you need to lock the resistance for...
  10. edyle

    airflow less or more? More flavor? More vape?

    More wattage needs more airflow.
  11. edyle

    Back to a mech full circle

    Are you talking about my kick module? That's not part of the 'hybrid'. Anyway here is a pic of a valkrye hybrid setup $27.25 Valkyrie Style Hybrid Mod - 1*18650 / sandblasted version at FastTech - Worldwide Free Shipping some more examples here: FastTech - Gadgets and Electronics including...
  12. edyle

    Bought my first real mod but need a lot of help.

    $3.22 Replacement Nano RBA Coil Head for SUBTANK Clearomizer at FastTech - Worldwide Free Shipping
  13. edyle

    Charging Question - DC/AC Converter

  14. edyle

    Back to a mech full circle

    The pic on the left of my posts shows a hybrid; There is no 510 threads. There is no topcap. The rda threads directly onto the tube. The rda has a very big, clear centerpin, with a big black insulator. The threading on this one is m20x0.5 Nemesis_kick-3d by edyle posted Dec 9, 2015 at 8:38 PM
  15. edyle

    Safety question

    I do not have an istick100, but one thing I do know about it is that it is one of the very few regulated mods that uses batteries in parallel; most regulated mods that use multiple batteries use them in series. You should try it with 1 battery and see whether the mod detects that there is only...
  16. edyle

    How to..

    dryburn the coil, and immediately after dryburning, tighten the screws. 24 gauge needs more power per ohm to run than 28 gauge; with 24 gauge you will also tend to end up with much lower ohms than if you use 28 gauge. I just think that based on what you said, you will find 28 gauge easier to...
  17. edyle

    A question about temp. control.

    The 21.1 amps is the amps through the coil. What you need to look at is the wattage. All that matters is whether your batteries are good for the wattage you mod requires.
  18. edyle

    Back to a mech full circle

    that's not likely. my 3d rda (clone) for example costed me about $7 and I've seen it on sale for less than $4. there isn't anything inherently pricey about a truehybrid atty.
  19. edyle

    Tfv4 triple & quad check atomizer issue

    sounds like you are just trying to use coils are are below the ohms range of the mod.
  20. edyle

    Clarifying temperature control-a few questions.

    If somebody happens to be using a tc coil that runs at a higher power on average that what they normally run in wattage mode, then they will find it drains the battery faster. If you want to compare battery drain in tc mode to vw mode, you'd need to use the same steel coil in wattage mode and...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu