Search results

  1. Fussellini70713

    Okay so

    The coils were built for me like he uses his at the shop n his is great,he told me to go to the other vape shop n say he sent me for a wider bore tip which I have to do another day. I'm rly also wondering is my 50w not enuf?
  2. Fussellini70713

    Okay so

    Wen it comes to the type of hit I do I don't know how to change how I've done it for the past years of smoking,the subtank I was hitting it fine n idk maybe mouth to lung idfk I just hit it,
  3. Fussellini70713

    Okay so

    Subtank is fine,rba was just somewhat bothering me sometimes burnt taste but worked fine enuf,the prebuilt coils tht came with it work good too but I wanted the most out of the tank n the rba has slots tht u can basically drain the tank of juice without having to refill a lil under half.I'm not...
  4. Fussellini70713

    Okay so

    I have my istick 50...have been using the subtank mini with rba n coils close to bout 1 ohm,good enuf,but get several burnt tasting hits,so local vape guy hooked me up with an dripper ..coil is .3 (need a wider bore tip now tho)nd I don't know what is wrong here but I'm using a 12mg juice nd not...
  5. Fussellini70713

    28g kanthal n coil building

    Yeah the tinkering will take a bit of time I can see tht! Just got back from e-cig shop n he says my coils look good ,just flooded the wick a bit much so he fired it a little till it wasn't like tht any more.gunna wait till this coil is done for then throw in the one I have built tht is good...
  6. Fussellini70713

    28g kanthal n coil building

    Okay so my .......ing problem is wicking...seen suggestions being "use a 1/16 drill bit...use the screw driver that comes with subtank"....Well fu** me alright I can't seem to get the cotton right...I want to use at least a 1/8 drill bit...my target is 1-1.2,1.3 ohms....Will someone plz help me...
  7. Fussellini70713

    RBA build,subtank attempt

    Tried another build n got .9...kept getting bubbling sound...idk what I did wrong.Tried the pre built coil it came with a .5 ohm nd wicked it nd it's fine enuf but I want 1ohms...anyone help? How many wraps on the screw driver tht came with subtank mini shud I do to get one? It's the wicking tht...
  8. Fussellini70713

    RBA build,subtank attempt

    My build is doing fine for me...went to tha shop n talked with dude for a while.no problems with it at all at 1ohm.So I'll keep doing it this way since it works good enuf for me
  9. Fussellini70713

    got my kit!

    Hell yeah,I'm just waiting on some info about rba for the subtank mini cuz I've never built one before
  10. Fussellini70713

    RBA build,subtank attempt

    Well since I am new I'm gunna keep to my builds over 1ohm. I was just thinkingto save the factory coils(.5 &1.2)that come with it since I have a huge package of cotton coming and 100' of 28g kanthal.been.practicing wrapping coils these last few days in preparation of doing all this.I plugged the...
  11. Fussellini70713

    RBA build,subtank attempt

    Took out the stock coil in It as it was reading.5 n put one I rolled of 28g kanthal.it's reading 1ohm...wicked it n primed it...shud I b safe for the time being running it like this? It's not getting hot at all nd is hitting great for me...ohm not jumping around at all either
  12. Fussellini70713

    anyone else feel this way?

    Definitely no longer doing those bad things tho! Just want this as New hobby,not that if I didn't I'd go back but ....well I hope at least someone gets my point! NOT A DRUG USER OR DRINKER...cigarettes r bad.I enjoy vaping for flavor nd the pieces,plan on having a nice collection one of these days
  13. Fussellini70713

    anyone else feel this way?

    Very great points...I mean I do see how dripping cud b good.but I'm doing fine for now with the subtank mini,gunna learn building on this,then wen I get the hand of it n some more money I'll get a rda nd many other mods,mechs,tanks etc.not just a instead of cigarette vaper,aiming for a better...
  14. Fussellini70713

    got my kit!

    I hear tht.doesn't sound pleasant to get nic sick. So far so good tho.Will notice over next few days if I shud lower mg but as of now I'm seeing perfect match! Have plenty of qtips too tho.no more leak as I had vaped open airflow for a little.
  15. Fussellini70713

    got my kit!

    Actually feel a little head rush..nice lol definitely brings out the unicorn puke flavor more so than the protank 3.gave my evod vv n protank 3 to my friend as soon as we got back to my house.he tried the subtank mini on istick n says wen he gets some more cashmoneys he's most likely gunna get...
  16. Fussellini70713

    got my kit!

    Tip kinda getting warm...why wud tht b?
  17. Fussellini70713

    got my kit!

    Dbrandt I'm sure it's cuz I primed too much.I did drip a fair amount on it soooooo..did u just get yours as well?
  18. Fussellini70713

    got my kit!

    4v 26.6w .6ohm,hits fine for me,was expecting stronger due to tank.difference but it's good! Super happy with this purchase,was flipping out for a while cuz usps tracking was saying still in delivery from 9am,it was in mailbox at my dad's at 505 but hadn't updated,he got home after six n said it...
  19. Fussellini70713

    got my kit!

    Istick 50w n subtank mini...tank is leaking a little I think I primed it too much,cotton didn't look wet so I put more in...hmm,but I am happy! Unicorn puke juice 12mg is great!
  20. Fussellini70713

    practicing making coils for rba on subtank mini

    Wth?.moved? My thread was about the RBA part of the subtank mini nd getting info...rba was rebuildable atomizer no? Oh well I've been helped well! Thanks all
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu