Search results

  1. Krythis

    A question from a complete techno-tard

    I wonder if they put a thermistor in the wick or something?
  2. Krythis

    3D Printed ProVari Case/mod

    I bought a 3D printer back in April and finally getting some free time to make some ecig stuff with it. I made an ecig desk caddy and battery holder a couple months ago, but that was about it. Here is a ProVari case(?) I designed and made today. I need to tweak the measurements a little, but...
  3. Krythis

    This is not a pipe...

    What are you using for a tank?
  4. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Right, the resistance wire is much softer then. It's also a good trick for bothersome imperfections in a 'J' style SS wick. Fire the atty and tap the coil where it passes over the dip and it'll bend down to meet the wick.
  5. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Nice Dan! So basically the coil will match the threading of the bolt used? Sent from my DROID2 using Tapatalk 2
  6. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Wouldn't you want the pos position to be able to slide parallel to the wick so you could slide it forward as you spun it? Maybe a positive strip? Edit: I guess this would take three hands to operate the coil, turn the wick, and push button :blush:
  7. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Many are using a DID clone. They have a bunch of names like DUD etc and only run about $20. Sent from my DROID2 using Tapatalk 2
  8. Krythis

    Any recipe sites that break down based on my flavors?

    Luckily only had to remove a couple users and all the spam was erased. I have email verification enabled to reduce the spam. Search by Flavorings Used | Community Vapebook
  9. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    I had a rough box printed by Shapeways a couple years ago, but with shipping time etc I didn't use it before I received my SGV3 and ProVari so nothing ever came of it. In fact I finally threw out that box about two weeks before I learned of the printers for home use. I bought a Solidoodle 3...
  10. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    I should have my first 3D printer in about 6 weeks...wish box mods were still 'in style'. It's OT, but I had to boast somewhere ;)
  11. Krythis

    Any recipe sites that break down based on my flavors?

    Yea I've noticed that and been kind of lax about it because of low traffic. I use the site for the calculator and that's about it until more recipes are added. I'll go through and clean it up in the next couple days. The site works great though :)
  12. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    My Drill Dr has been seeing a lot of use after these Sent from my DROID2 using Tapatalk 2
  13. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Grinding to .120 sounds like a good idea, and you don't have any leakage around the wick? My frustration has been that even though I grind to .125, and use a size gauge, they still get stuck in the wick hole and snap.
  14. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    If it required any reinforcement, even being that thick, hypodermic tubing (or needle) would probably be a good place to start. Stainless Steel 304 Hypodermic Round Tubing, 15 Gauge, 0.0720" OD, 0.054" ID, 0.009" Wall, 60" Length: Amazon.com: Industrial & Scientific
  15. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    I haven't worked on this in a couple weeks because of a cut finger (not modding), but for the two I made with it, the bench grinder helped keep the shape more uniform than a Dremel wheel. Seemed like each wick I made with the diamond wheel was tapering at the ends. My technique I'm sure, but the...
  16. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    How well are your through-hole coils working? The wick I have now was made with a drill bit, but it's not perfectly symmetrical and has hot spots. I bought a similar set off Amazon that I use for shaping of the top. 20pc Industrial Diamond Burr Set for Rotary Tools - Unique Shapes - Amazon.com
  17. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Second attempt at a through-hole coil. Snapped part of the wick off on the grinder, and the hole isn't as symmetrical as I'd like, but so far so good. 2.0 ohm 34g (I believe this is 34g they sent with the DID clone). So far can only handle 3.8v on the ProVari, but I still need to break it in...
  18. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    You could make a glove box out of a scrap cardboard box and plexyglass or clear bag. Sent from my DROID2 using Tapatalk 2
  19. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    Nice video Dan! Grinding stone works great, now I just need to buy a heater for my garage lol.
  20. Krythis

    The Next Big thing.... Porous Ceramic Wicks

    I'm using lots of water, but i was expecting better results than that. Sounds like I just need to go much slower.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu