Search results

  1. MMcQ

    Help please

    If that's a .15 coil its nickel. Can only be run in TC mode. Should be 3 presses of the fire button to change till you get to NI and then make sure you take off your atty and press fire to get it to recognize your room temperature coil. (Only do this when your coil is cold). Then start low...
  2. MMcQ

    Joyetech Cubis

    Kbox120.. TC is working in as much as I believe this thing to be capable of. I've just finished making my last 3 coils with Nichrome and have been using the TC mode. More or less its provided a consistant vape that has actually been regulated of some sort. I've felt the mod kick in and cut...
  3. MMcQ

    Kanger kbox mini is being weird

    *Edit, what Lordrul said. Gotta learn to pull the reply trigger faster lol.
  4. MMcQ

    Joyetech Cubis

    Yea I have no idea the wattage this thing is working on. TC in nichrome is something different I think on this thing. It says its hitting it with 120w at first and sometimes it'll show a temp and the wattage shows as varying but more often than not its reading 00 and saying 120w which can't be...
  5. MMcQ

    Joyetech Cubis

    Update: Built a 1.1 ohm nichrome coil running at 260 C on kbox 120. Stock coil, not rba. This thing is rocking it right now.
  6. MMcQ

    Credit turned down even though purchase was approved .

    Was the OP's card actually charged? I'd be alarmed anytime my CC/Debit info was put out there and then the deal disappears into the ether.. Who now has the info? What else could they do with it? Watching your bank account on a daily basis has become more important than ever in this day and age.
  7. MMcQ

    Better News on Formaldehyde

    I thought we were the vaping robots... :shock:
  8. MMcQ

    Aspire Plato? Another Nebox?

    Looks interesting.. Only 5.6ml tank though. Pyrex is a plus. Doesn't look like it has an rba option yet. Think I'll pass on getting one soon too.
  9. MMcQ

    Volts or watts?

    Perhaps I should clarify this. With an unregulated mod the only way to increase your watts was to build a lower ohm coil as voltage is fixed. With a regulated mod the resistance of the coil is irrelevant in terms of figuring out your watts because the mod does that for you. Voltage is just a...
  10. MMcQ

    Volts or watts?

    clouds bro! <sarcasm included>
  11. MMcQ

    Volts or watts?

    You've got it backward. Watts are what matters. Lower ohm coils need more watts as they are typically composed of larger diameter wire and require more energy to heat up but a low ohm coil built with higher gauge wire would heat up faster with less voltage so lower watts. What really matters...
  12. MMcQ

    Kanger Subtank RBA frustration

    I'd say soak it. Then let it sit for maybe 5 or 10 minutes with a primer puff to see if it makes any air bubbles pop into the tank. Put it on the max airflow to "even" it out if its flooded a bit and then see if you have to decrease the airholes to increase juice intake. Gentle hits at first...
    • MMcQ
    • Post #8
    • Forum: RTA
  13. MMcQ

    New Batteries - Buying Uncharged

    Best bet for storing batteries long term is at 40% capacity at 0 C. How to Prolong Lithium-based Batteries - Battery University. That's about 3.85 volts according to the link so having the shop charge them and then draining them down should be ok and if stored in a freezer then a moisture...
  14. MMcQ

    Dual Battery Mod Question

    For a quick answer 2 20 amp batteries should be able to handle up to *Edit 92.1 watts regardless of resistance in a regulated mod.
  15. MMcQ

    Dual Battery Mod Question

    To figure this out you would need to use Watt's law. This question is very similiar to one posted a couple days ago Need help to grasp current (Amps)
  16. MMcQ

    Kanger Subtank RBA frustration

    To be honest I've found that too little wick was usually my problem.. Try stuffing the hell out of it. If it works, you've found the solution. If its still bad you have a baseline for too much and can whittle it down from there. Cotton pads help with this as they're really dense to start...
    • MMcQ
    • Post #6
    • Forum: RTA
  17. MMcQ

    Kanger Subtank RBA frustration

    You might try continuing the hit after you release the button to continue drawing juice to the coil and cool it down faster. If its still sizzling after you try this than its usually a sign of a dry wick that burning. Now you have to figure out if its dry because its too little wick (collapses...
    • MMcQ
    • Post #3
    • Forum: RTA
  18. MMcQ

    Nicotine health situation

    The relationship between nicotine and addiction/dependence has never really been conclusively studied outside of the context of smoking. The one study that I do know of was conducted with patches and showed no withdrawal symptoms when the participants stopped using them. Should be fine to stop...
  19. MMcQ

    30 watt e leaf problem

    Also, what tank are you using?
  20. MMcQ

    30 watt e leaf problem

    the 20 watt had this sort of problem as it didn't have step down. 30 watt did, so that shouldn't be happening. What wattage are you running it at? What usb charger are you using to charge it? Mine would get warm while using a 1 amp but seemed just fine if I used a 500 mah one.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu