Yes for this mod the 510 screw needs to be sticking out from the outer thread and not be able to be pushed back in.
Also as with all mech mods use good recommended batteries that have an amp rating higher than your build will be drawing from them.
2.5mm diameter 5.5 wraps using a coiling tool. I check it on a reg mod that only goes to one decimal point so it could be anywhere from say 0.27-0.33 depending on how it rounds up. My ohm meter shows me if theres a short but I'm doubting its accuracy lately.
I have the legs rather short and...
I think most people are going to say no as those flavourings were probably not meant to be inhaled and could contain ingredients that are not good for coils. Most eliquid flavourings are stronger so not sure as to the amount you would use if you were going to use that.
Though gather some people...
Im using 26g nichrome on a mech dual coils 0.3Ω and its good for me down to around 3.6/3.7 volts.
Though can change for some atty as I've gone down to 3.4v on some but usually the good spot is from 4.15 to 3.7
Don't have the thump but I have all coils in all attys close to the posts on the positive wire then the negative wire angled over.
Can on occasion get some uneven heating but nothing a strum of the coils has not fixed.
Do it due to wanting wraps instead of legs. Using Vector currently with the...
If your talking about petrol for cars , gas is what stoves and heaters run on. Nah I know Haw too tawk a merry can :)
Well for the car it takes whats called 95Ron or 98 Ron
95 Ron is $1.19 AUD a litre or $3.19 USD a gallon thats with the current exchange rate.
98 Ron is $1.26 AUD a litre...
The nautilus can be ok for some but I found it to be too finicky , most seem to have less issues with the mini.
Don't know if the coils have changed since but when i used them the juice holes were very small.
I used one for a while , need to know your stuff or don't get one. I would get something else though. I now just use it to help with pulling the top cap off tight fitting attys.
I liked the original Youde Goblin on it.
Well done VaporDaze
Ive done the same myself , 3 or 4 strands 30g twisted. Got some for the outside wraps on a clapton coil and then thought well what if I twist these together.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.