Search results

  1. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    No. Bob the maintainer.
  2. IML8

    IPV4 preorder

    Aren't you inherently tethered to something when using any passthrough?
  3. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    Confucius say, It's more efficient to maintain than to rebuild. Okay, that wasn't Confucius. It was a friend of mine - Bob. It seems to apply here, but nobody pays much attention to the sayings of Bob.
  4. IML8

    Ipv 4

    The Yihiecigar SX330 V4S spec sheet for the chip shows 7 watts minimum. I tend to rank what Yihiecigar says about their own chip above what any other sources say about it. It sounds as if a 5 watt minimum concerns you. Is that not low enough?
  5. IML8

    Ipv 4

    From Gear Best: Product size (L x W x H) : 10.8 x 5.8 x 2.6 cm / 4.24 x 2.28 x 1.02 inches Or close enough to 4-1/4" tall x 2-1/4" wide x 1" deep. My 25 mm Subtank Plus should fit nicely on top of that.
  6. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    The adventure continues...
  7. IML8

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    And entertaining...at least from where I'm sitting. :lol:
  8. IML8

    Goliath by Youde

    I think the concern is getting enough nickel wire in such a restricted area to get the ohms up to a functionally practical level with dual spaced coils, but the IPV 4 is supposes to fire down to .1, so, with some experimentation, I ought to be able to figure something out that works. *fingers...
    • IML8
    • Post #202
    • Forum: RTA
  9. IML8

    Goliath by Youde

    I have some 30. how many spaced wraps do you think will work with a 2.5 mm diameter? 5? Or is that going to be too big?
    • IML8
    • Post #197
    • Forum: RTA
  10. IML8

    Goliath by Youde

    I hope to get my Goliath some time next week. The plan is to pair it with the IPV 4, which I also hope will ship sometime next week, and a dual nickel/rayon build. Hopefully, the YiHi temp control on the IPV 4 works as well as it's reported to work on the SX Mini M class. I'm thinking this could...
    • IML8
    • Post #195
    • Forum: RTA
  11. IML8

    Ipv 4

    Probably too big for people with petite hands, but looks just about right for me.
  12. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    Well yeah, it's a little conspicuous given that most vendors here regularly interact with their base in their own forums. It seems like a smart and cost effective thing to do, to me, but what do I know? It's within the scope of possibilities that it's part of an ingenious master plan beyond my...
  13. IML8

    Ipv 4

    First I heard of this, but today, April 10, Vape Street is now advertising the IPV 4 thusly: Adjustable wattage: 5W-150W (NEW FEATURE: upgradable to 250W) The picture looks the same as the mod were all waiting on, but that's not posted anywhere else that I've seen. Weird. Do they have some...
  14. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    I know you have pictures. Let's have a look, Squeakers. It's the law. :rules:
  15. IML8

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Okay, got it. Thanks, mudram. Yeah, me too. After it straightened out, it wicks and tastes great. It was super easy and, more importantly, cheap to do. If I can sit down, once every couple of months, and rebuild 5 (a packs worth) in an hour, I'm makin' money...that's how I like to look at it...
  16. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    This is good news. It's going to take a while for society to overcome its knee jerk reaction to seeing what they think is smoke coming out of people's mouths, but we'll get there.
  17. IML8

    [CLOSED BUSINESS] Bionic Vapor Virtual Home of the Minion Empire (Chit-chat, support)

    That was hilarious. Only thing hurt was its pride. No, M.J. doesn't get that deep, but it's still pretty funny.
  18. IML8

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Duly noted. Thanks, Woofer! I guess it was more of a nutty taste than a dry hit taste and it wasn't all that horrible even at first. I appreciate BigLung's advice and value his opinion, but I don't think it was a burnt insulator. I won't make the same stupid mistake again, but I just quickly...
  19. IML8

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Thanks so much, BigLungs. I'll remember that next time. I didn't mean to imply I used the old coil. I replaced it with a 1 ohm coil I built, but thought I could dry burn it in the coil housing to remove any residual oils and whatnot. Next time I'll use my propane torch before I put it in...
  20. IML8

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I have a question. I just took a stab at re-wickingd a Kanger Subtank factory OCC coil with rayon after removing the old wick and dry burring the coil. I made sure the new wick was fully saturated, but I still got something like a dry hit taste, but not quite as bad/strong as a typical dry hit...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu