Search results

  1. CorallineAlgae

    eVic-VT mini?

    Have you tried cleaning the 510 connections on the mod and the tank with alcohol and a Q-tip? There could be oil on the threads from manufacturing. It's a long shot but couldn't hurt.
  2. CorallineAlgae

    eVic-VT mini?

    It seems like the 3.01 firmware make the SS TC vape even smoother. The 3.00 firmware almost eliminated the "pulses" from earlier firmware while this version seems to have made them go away all together. I only noticed slight pulsing occasionally on certain settings using 3.0. Can't seem to make...
  3. CorallineAlgae

    EVIC-VT 75W mini Firmware Ver 3 and 1.0Ohm

    Hi there. The stock 1.0 ohm CLR heads are kanthal so you will need to rebuild them them with SS wire for temp control. If you're aiming for a 1.0 ohm coil 28 gauge SS wire will get you there. I recommend using a 2.5mm rod to make a 7-8 wrap coil. The wraps should be slightly spaced. You don't...
  4. CorallineAlgae

    eVic-VT mini?

    Now you're trying to make me jealous. It's working. :p I really hope that firmware v3.01 has that, along with a true resistance lock. If they add those 2 things I think most of the complaints about the VTC would disappear. It's still my favorite mod, but being able to adjust the watts up and...
  5. CorallineAlgae

    eVic-VT mini?

    I'm not sure what forum I mentioned this in (might be this thread), but I posted about the same thing right after the firmware came out. I found that I had to bump the TCR to 0120 or higher to get the same vape from 316L as the default SS316 setting. Just tried it again. A TCR of 0120 is...
  6. CorallineAlgae

    eVic-VT mini?

    I have dry fired the stock coil and my own coils many times on CLR heads without damaging the grommets. The only thing that slightly damaged a grommet so far was twisted wire. It made a tiny tear in one while roughly installing the coil. I replaced the torn insulator with a CL coil insulator. I...
  7. CorallineAlgae

    Wismec 75w TC

    I've been off my game lately. Been busy and a little hidey. :img: Gotta say, the new firmware works flawlessly so far, but it is a little more difficult to read some things. I wasn't a fan of the old font, but I'm not a fan of the new one either. In the new screen, the top setting could be a...
  8. CorallineAlgae

    eVic-VT mini?

    Exactly right. My first VTC Mini was hardware v1.00 & firmware v1.02. My second VTC had hardware v1.01 and firmware v1.10. They both have v3.00 firmware now and it's so much better.
  9. CorallineAlgae

    eGo ONE tank series – CLR coil

    I'm also a fan of the eGo One tanks with CRL heads. I've been using them with stainless steel coils for the last couple of months and really enjoy them. I haven't tried the premade coils since my Protank days but Fasttech is starting to carry premade 316 SS coils. They're spaced so they should...
  10. CorallineAlgae

    Joyetech Cuboid 150 watt

    I just got the spacers in and they definitely work, although they're shockingly thin and don't stay on the tank when you take it off the mod.
  11. CorallineAlgae

    Joyetech Cuboid 150 watt

    Some of us ordered these to solve that issue. Attys with long 510s should stay secure and sit flush with those spacers. Mine will be delivered tomorrow.
  12. CorallineAlgae

    Wismec 75w TC

    The VTC firmware update didn't work for me using the 1.2, 2.0 or 3.0 updater. It kept giving me the Unknown Device message. The Presa also would not work with any installer without a battery. It kept connecting and disconnecting over and over again. Did not matter if I was using the Presa or VTC...
  13. CorallineAlgae

    eVic-VT mini?

    Great find. I was looking all over for those. I know I saw them a while back but I couldn't remember where. Either way I ordered a set. They were $4.49 with shipping. Worth it. Thanks for the link. :thumbs:
  14. CorallineAlgae

    Joyetech Cubis

    Does your tank have slots cut into the top of the tank threads? When you unscrew the top part that holds the coils, the threads right above the glass should have vertical grooves cut into them. Those allow the pressure to escape when you replace the top. You can see those grooves here. Have you...
  15. CorallineAlgae

    Joyetech Cubis

    Me too! I went to junior high and high school in Opelousas. Small world. Sorry to hear about your tank troubles. Seems pretty serious. It sounds like it may be missing an O-ring or or have some other manufacturing defect around the top. Youtube reviewers have shown that closing off the airflow...
  16. CorallineAlgae

    eVic-VT mini?

    Thanks for the link. :thumbs: Just ordered a set. I only have one unused pair of batteries at the moment, but I'll need a spare set to pair-up for the Cuboid. Love HG2s.
  17. CorallineAlgae

    eVic-VT mini?

    Right on. It also works well for those of us who prefer cool vapes with stainless steel. We can use lower a TCR than the default SS316 setting to fine tune our vapes for lower heat. The user adjustable TCR feature rocks. That was a big coup from Joyetech.
  18. CorallineAlgae

    Joyetech Cubis

    Hey, a fellow Louisiana resident! Love your avatar. Reminds me of my VTC Mini.
  19. CorallineAlgae

    eVic-VT mini?

    2legs was talking about his preferred titanium TCR setting, not stainless. 92-120 is right on for many SS builds, although I go as high as 140 sometimes.
  20. CorallineAlgae

    Joyetech Cubis

    I also ordered one (along with a Cuboid). From the video it looks like the .5 ohm heads should be simple to rebuild. Very happy about that. I hope the airflow is on par with the eGo One (which I really like). Either way, these are priced so low they're definitely worth a shot.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu