Unlplug it and connect a battery. Hold down the fire button until you see the version come up and cycle through. Press fire 5 times and it'll boot up. Now either disconnect the battery or go into menu to Link and lean it for 5 seconds and let it cycle through. your done. Press 5 times to...
yeah sorry Kevinn I need to sleep sometimes :) I put the 40W on the site if anybody wants it. I'm tracking the 50W and do not have it yet so please no more emails asking for it :)
I will say with 50W guys....you need a kick A@# battery else your going to get Check Battery Error all the time...
I have been contemplating posting this information here but since I've been asked I want to provide some clarity.
You may have or will see 35W, 50W and eventually 100W Chinese mods hitting the market with low prices from Pioneer and Sigelei. The deal is that these are license only to those...
We have another product update folks!:
The bad news is there will NOT be a 40W upgrade release!..........
But the good news is they've decided to just go straight 50W !!! :)
I have the 40W file if anybody wants it now.
50W official release will be next week.
Another of my customers Mods....I'm sure this thing is over other places but he is not a member here. Check this out!
More pics can be seen here Coca-Cola Retro Style Collectible SX350 Mod - Imgur
hey guys with the Bypass mode discussion. Remember the chip can only run off 4.5V max....3.7 nominal.....thats a single cell. You cannot stack cells in series. doesn't matter Lipo, IMR, etc. In bypass it acts like a mech .... direct battery to atty but through the board...so it provides the...
Question 1 - Yes Link works fine after initial update including the 40W
Question 2 - Both 40W and eventually 50W will use a single 18650....note the input voltage on the specs always....this board is for single cells...so yes battery life will begin to be an issue if you cloud chase full time...
You cannot change the splash screen. Some people with skilz do so at their own risk and loss of warranty and bricking of board. Its not for the above average joe :)
Good Idea!....i actually meant to do that and forgot! Until I get to later today from the shoulder to the brass retaining cap is roughly 1/2" with it being split roughly 1/4" M10 thread for the brass nut and the other 1/4" for the retaining cap. But total inside mod will be 1/2" minus your box...
hey guys....we're really happy to now be able to offer our own low profile 510 connector. Spring loaded center pin, 14mm wide, only 1mm thick...ultra low profile. check it out here Varitube 510
at 2.8V under load it will start flashing to 10W and eventually say Check Battery. So if you have a bad battery and under load it drops to 2.8 it's going to yell at you too. You will almost always hit that threashold before a low battery.
The unloaded threshold is 3.2V
Then again all the...
No worries....(1)YES there is a charging board with micro USB included and its attached and (2) the charging board already has a charging LED on board.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.