Search results

  1. bapgood

    Just hemp

    Dual - 10 wraps of 30g around a 16g hypo needle comes to about 1 ohm. My last setup was dual 11 wraps to bump up the resistance to keep my DNA SxS out of unregulated mode....didn't plan on a super effecient DNA mod causing issues :D
  2. bapgood

    Just hemp

    ~1.6mm I believe
  3. bapgood

    Just hemp

    Here are the pics of the dual coil twisted ends and setup with ramie in a TGT. Not sure if it's the uber oxyclean cleaning or just the TGT.....but A+++.....and the Russian is going back on the shelf :D
  4. bapgood

    Just hemp

    I make seperate coils, and then hold them side by side using two 16g needles and twist the ends together. I will try to remember to take a pic when I set up a TGT in a little bit.
  5. bapgood

    Just hemp

    Look what I found :D I wouldn't say it was hard to setup....but I was reminded why it has been setting and how much nicer a TGT is to setup and fill :D Seems to vape fine (just did it so can't say much), but I'm getting a slight rami taste so I'm going to oxyclean the rest. BJ how "full" are...
  6. bapgood

    Proetus's DNA20

    Is your fire button still working and still connected to the board.
  7. bapgood

    Proetus's DNA20

    Check continuity from the center pin to the board and the outside of the 510 to the board. If those are good your atty probably isn't making contact with the center pin.
  8. bapgood

    Just hemp

    Not sure where BJ posted it but I believe he just washed it with dish soap and then boiled it.
  9. bapgood

    No Gold! But there’s a Fist-Full-O-Diamonds!

    Great Job!!! You got me curious about Micarta!!!! While doing some research on it, I stumbled across this DIY for making your own. Seems fairly straight forward. Think I will have to add it to my future project que :D. Micarta Thanks for the info and inspiration!!!
  10. bapgood

    3D Printing a DNA30 Mod???

    Jmac covered things very well. The Tibs-2 is designed to use the on board buttons to keep things simple. The big thing is that the design has to accommodate the printer or print technology used. I have access to a Cubify CubeX Duo at work which is a filament style printer, however the print...
  11. bapgood

    Just hemp

    Must be sold out. That was the link I used when I ordered mine.
  12. bapgood

    Just hemp

    x2........:D
  13. bapgood

    DNA 30 issue

    Nope, haven't tried that one.
  14. bapgood

    DNA 30 ,treat me like I am thick

    They are 7a hold so you would want 2 to get you 14 total. You could probably get away just one as it's a 14 amp trip, but it starts adding resistance at 7a. The fuse link in my sig has some great info on fuses.
  15. bapgood

    Proetus's DNA20

    Did you order some real Hakko tips or are you just using the ones that came with it? From the reviews I read it sounded like the tips that came with it were crap. You can get an assortment of Hakko tips for about $10 shipped, also get a brass ball tip cleaner if you don't have one. Take care of...
  16. bapgood

    Proetus's DNA20

    The 20g wire is pretty tough to get into the holes in the DNA, you can't have pre tinned holes or wire and then you have to be one lucky sob. The best way I have found if I want to go into the holes is to use the 22g spot to strip the shielding and a few of the wires. However typically I don't...
  17. bapgood

    DNA 30 ,treat me like I am thick

    I just ordered this fuse to try 2920L700SLPR
  18. bapgood

    DNA 30 ,treat me like I am thick

    Yeah, they are 3 amp hold.....2 on each battery and you have 12 amps total.
  19. bapgood

    DNA 30 issue

    I can vouch for the battery holder that Retird linked. It will do 30 watts with a good battery and wiring.
  20. bapgood

    DNA 30 ,treat me like I am thick

    2 6amp fuses for single 4 3amp fuses for dual (2x3amp on each battery)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu