Search results

  1. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I'm having the same problem, going into lock and a couple of times going into setting menu. I thought it was my switch also but changed that and still doing the lock up. OneDesign, any ideas?
  2. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    That's the one all right. It didn't occur on me about the amp limit. But at least now I know what the problem is. Now to decide if I want to limit myself to under 25 watts, go to a bigger amp battery (and have to rebuild the box) or try to find a higher amp Lipo pack. Decisions, decisions...
  3. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I'm using a Lipo battery pack:Li-Ion 18650 3.7V 4400 mAh Rechargeable Battery module with PCB that I got from Amazon. the firmware version is 2.4 and no battery spring, it's straight wired to the positive side of the board and the negative is soldered to the negative side of the 510 connection.
  4. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I've been trying different devices today and have run into a problem that I can't figure out. I started using a Tugboat, with a .5ohm, dual coil at 20 watts. I was able to run it up to 25 watts but then the chip shut down on me. I had to disconnect the battery to get it back up. Tried it...
  5. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Now that you mention it, yes. I thought it may have been my fire switch but can't confirm until I replace the current one.
  6. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Vlad, I'm really leaning toward trying one of those for the SX350. My first box came out ok but I feel I could do better.
  7. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    That is sweet looking. Which box did you use from Fasttech?
  8. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I agree on the board being overlooked. And I would also be interested in doing a group buy for the box. The Hammond box is ok just a little on the big side. I'd like to do another mod but use 2 26650s in it but I hate the price that Shapeways wants for their lid.
  9. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I have their 510's also. What I did was use a rat tail file on the bottom piece till the wire was able to slid through.
  10. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I for one will be watching for this as well
  11. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Vlad, it's a Hammond 1590 box, I sanded the sides down to try and make it sit level. I did a mechanical box using the same one and it drives me crazy when I set it down. And I learned not to order a box with ribs on the inside, had to do some modifications to get the chip to set right...
  12. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Finally was able to finish my very first mod. As you can tell, it's not very pretty, still need to clean up the inside some but it rocks! Right now I have a Tugboat on it, running at .5ohms with some 28 gauge dual coils at 20 watts and I like it! Had a few bugs that I had to work out but...
  13. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Trucker and as a former driver, keep it safe out there.
  14. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Well, I'm waiting for the paint to dry and then it's time to start assembly on my mod. I'll post pics as I move along. But have a question and I'm sure it's been asked before, just too lazy to search the thread. Is it better to connect the negative lead to the battery or better to ground it...
  15. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    That is one of the reasons I follow this thread, more so then any other.
  16. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    I was having the same dang problem and was directed here:Download - SXI-60W-software-20140808 After I loaded the update from YiHi, I had no problem getting my chip updated.
  17. BadDaddy4007

    Sigelei 100 Watt Raptor Box Mod

    I've dealt with VaporTek for a long time and I am able to visit their B&M. They are a very reputable company, take pride in what they offer and will do their very best to make sure you are happy with any purchase you make with them.
  18. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Not bad if you don't mind waiting on shipping.
  19. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    As I've been following this thread, I've noticed several people want to use silicone wire for the hook ups. I ran across this today :Silicone Wires - Accessory. I ordered some yesterday, shipped today. I will not be able to evaluate it until I return from vacation, that's also the first time (I...
  20. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Brother.It took more work from the nice people here then on my part. But I do appreciate it.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu