Search results

  1. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    How about version 2.4 on start up! Hurray! Thanks for all of the help that everyone has given me. I know that newbies can be a pain at times. Seems like what needed was the 60W installer, not that I plan on running it that high. But it's nice to know that it works like it's suppose to. Thanks...
  2. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    V1.2.0 is the one listed on info
  3. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Just loaded that one with no problem but the 60W still will not load, dang it!
  4. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Ok, tried a different cable, reinstalled driver, found device ok. I'm using this file:SX350_OldBoot_YH_Logo_50W_20140813-Screen flip_V2.4.SXI that OneDesign directed me to but it still pops up an error message. Should I try using the oldest file first? Like SXI-60W-software-20140808...
  5. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Did the, closed the program, disconnected the cable, restarted the program, connected cable, connected program to device and got this :Index=0,Code=1,Comment=Sys_Init(). Index=1,Code=47,Comment=No valid DFU suffix signature. Index=2,Code=2,Comment=Dfu_IterateDevices()...
  6. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Brother, I down loaded the file, told the YiHi installer where to look for it, tried to update and it's just showing Upgrading =0% (0.00 Seconds) It's been running about 15 minutes now. I'll leave it running but it looks like I've done something to keep the board from updating.
  7. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Well after getting winzip, opening the file, changing the file extension to .sxi, I still can't get it to upload. When I try, I get the following:. So I'm beginning to think I just one of those people that will have to be satisfied with what I have, dang it.
  8. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Finally got into YiHi, down loaded the file, changed extension to sxi and still no luck.
  9. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Not yet, YiHi seems to be down at the moment
  10. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Sorry double post, not paying attention again.
  11. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Ok, two things: I can't get the updated firmware to load. I went to YiHi and down loaded SX350_OldBoot_YH_Logo_50W_20140813-Screen flip_V2.4. But when I try to update the chip, it does not take. I was able to update the file from Varitube's site with no problem. When I boot up the board, it...
  12. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Ok two things that have popped up for me. First is upgrading. I used the instruction from NickWhit to find out what version I had. Then I used the instruction from Varitube to install the upgrade program. Then used the link to install the 50w upgrade sxi file, no problem so far. But then I went...
  13. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Brother, I'll give that a try tomorrow. Too late in the evening to see straight.
  14. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Thanks Brother, this is my second mod I'm trying. My first one was a straight up mechanical in a Hammond 1590 box , using Sony 18350. And I did add a car type blade fuse that I had laying around. Even though I'm just starting my "build-my-own-mod", I've done enough every day tinkering to know...
  15. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    To find put what version of firmware I have, disconnect the battery, down load the software from YiHi, plug into the usb and it should tell me, right?
  16. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Got it, thanks Dr. It's amazing what you can learn by doing and paying attention.
  17. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Oh Happy Day! The postal person came early today with my SX350 and 2 of the 510 connectors from my new buddies at Varitube. Couldn't be more excited about a little thing like that. Still waiting on a few parts to come in, box, switches and battery. So it will be a while before I complete mine...
  18. BadDaddy4007

    The Vmod XL 18650 Bottom Feeding Mod from Vapage - Part 2

    That's one of the reasons I'm getting the parts together to make my own mod. Don't have to worry about pleasing anyone but myself.
  19. BadDaddy4007

    The Vmod XL 18650 Bottom Feeding Mod from Vapage - Part 2

    Yep, it didn't help my cause at all. Makes we wonder what they have up their sleeve.
  20. BadDaddy4007

    The YiHi SX350 35W Chip at Varitube

    Well after spending 2 days reading the thread, I took the plunge. Placed my order for the Sx350 and the 510 connectors, both the 14mm and the 22mm. Now comes the fun part, deciding on which box, switch, battery and all the other fun stuff.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu