Search results

  1. skelley

    Anyone try the new Kanger T3 yet?

    The wife has used them on her KGO's; Super ego VV; L-Rider and a few other batts that she already gave away without any issues. I use them on my 6 amp Beast w/ a sealed ego adapter w/o any issues also. We don't have any issues w/ batts center post as I find the device that has the longer post...
  2. skelley

    Anyone try the new Kanger T3 yet?

    First, if you have a multimeter, check the clearo for resistance. No resistance = open circuit and it's blown. Super low resistance = dead short. Change head in both cases. If resistance is on par, then it sounds like you need to pull your battery post. Turn the batt off. Use something small...
  3. skelley

    Stop raving about the ViVi Nova's (and Minis!!!!)

    I keep testing mine, but I'm about done. I hate the wicks in the 1.8 & 2.4Ω. The 2.8Ω wicks are better, but still not doing it for me. The flavor is muted and they still 'filter' the juice as I've vaped 1/2 tank w/ the 2.8 head and the juice is already noticeably thicker. Back to rockin'...
  4. skelley

    The 6AMP Beast is Here- Smoktek Smokbox Varicool 6amp USA Mod -Review

    When I first thought about going to 700mah 14500's from 2200mah 18650's, I thought I would need many sets of 14500's as I was only getting 10hrs max on the larger mah 18650's in my tube mods. I get a good 12hrs+ of normal vaping time @4.2v on the 14500's in the 6amp Beast, then they go on the...
  5. skelley

    Anyone try the new Kanger T3 yet?

    I just refilled and I wanted to clearify my filling procedure. Since I have the seal set where I want it, when I refilled, I just snugged it up to where the center tube barely touched the seal and stopped. It helps to hold it up to a light or the monitor to make it easier to see the tube/seal...
  6. skelley

    Where can I buy just the ViVi Nova Base Stem?

    I don't think that I have ever seen any vendor selling 'parts'. You might be better served by buying the complete system. That way you have extra parts for later down the road.
  7. skelley

    Anyone try the new Kanger T3 yet?

    I love my cleaors, some more than others, but I prefer bottom coils over top coils any day. I hate the 'tilt-2-vape' law and it feels like I have to dance for my vape. Swirl; twist; tilt; vape and repeat...ugh. Top coils also wick the thinner parts of the juice first and leave the heavier...
  8. skelley

    Anyone try the new Kanger T3 yet?

    These work much like the BetterLifeTech CE3's as you should see air bubbles as you vape. With my set up, I get them about every other vape. This is a indicator that everything is working good. The T3 delivers flavor much like my CE3's and better than any top coil clearo. It is my goto device...
  9. skelley

    Anyone try the new Kanger T3 yet?

    If the wicks are black after cleaning, I would say they are burnt. I clean everything prior to use. This removes any residue and gets the wicks working. A few things to try: -Add o-ring at the base and don't tighten all the way. -Remove 1 flavor strand. -Trim a small sliver off of the seal. I...
  10. skelley

    Anyone try the new Kanger T3 yet?

    I had to return a Vivi Nova Mini for the same reason, zero air flow. I was hoping for store credit as I don't care for the one that I have that is working. I gave it to the wife and now she can have 2. Maybe the chinese holiday was hard on the workers and they all had a hangover...
  11. skelley

    Anyone try the new Kanger T3 yet?

    Give them a try wseternmd and let us know what you think :2cool: I think that you can over tighten them and that pushes the seal down to far on the wicks, I loosened mine up to keep up with my vape pace. The wife has a slower vape pace and she likes them just as they are. Something to think about.
  12. skelley

    Dry hits on Kanger T2?

    Ahh, the old seal lifting. Yeah, it's such a habit now that I forget about it and it's part of my routine. Every time I remove the tip, I lift the top seal slightly with my finger nail and let the tip reseat it.
  13. skelley

    Dry hits on Kanger T2?

    Top coils all rely on the 'tilt-to-vape' law, but since you already do this, I would say something is wrong with the head. Open it up and inspect it as most issues can be solved this way. Also, since the heads not working right, change it. Don't continue to use it. I have never had this issue...
  14. skelley

    What goes bad on a Kanger T2?

    I just remove tip; pinch the head where the slots are and unscrew. Lefty loosey, righty tighty....lol. Grab a freshly cleaned long wick head. Push the wicks down towards the threaded end and hold them there while I install. I get the wicks started in the shell first then push the head down and...
  15. skelley

    Anyone try the new Kanger T3 yet?

    T2's or 3's? Nah, I use to like Vision, but not anymore. I like how they design items, but absolutely hate their wicks as they act more like filters. That's my mileage though and I've spent a lot of mileage this year :laugh: I'm not sure what to suggest as you have gurgling and dry...
  16. skelley

    Anyone try the new Kanger T3 yet?

    What happened with the flooding? How did go from gurgling to dry and what, if any, adjustments did you do?
  17. skelley

    Vaporheads Vision Spinner DOA?

    I'm not sure I understand your 'red' description, but most batts need charged before use. They seem to come with a partial charge also. Have you tried pulling the batts post? I would also unplug the charger and clean the connection to remove any gunk. Rubbing alcohol and a old tooth brush seem...
  18. skelley

    Anyone try the new Kanger T3 yet?

    If you have a variable volt batt, you could try increasing the voltage for a few vapes then turn it back down. That's what I do on my tweaked T3.
  19. skelley

    Anyone try the new Kanger T3 yet?

    The post is tight in the housing, but it can be rocked out to inspect the coil and loose strands. If everything is good, reinstall and ensure that it's seated. Install seal and reassemble and test vape. That's where I would start.
  20. skelley

    Anyone try the new Kanger T3 yet?

    I added a additional o-ring just below the threads. Then I lift the seal; fluff the wicks and when I snug everything up, it doesn't push the seal down as far on the wicks. I also removed 1 of the 2 loose flavor strands to increase flow also. The wife uses 70/30 and hasn't had any issues...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu