Search results

  1. zogu

    The Really Big RY4 Roundup (long)

    Found this post using search and just ordered 50ml from HC (I will have to wait until 1. February because of New Year...). First i wanted to order 30 ml bottle, but only 50 ml bottle is 26mg nicotine, all other hc bottles of dekang ry4 are 24mg???? Is this juice different, some old stock? Maybe...
  2. zogu

    Vaperite - Am I doing something wrong?

    And one more thing from faq section on vaperite: Another Atty cleaning method I use is Efferdent Tabs . They work great! Just put one tab into a small glass of water let the Attys soak for 30 minutes , Then wash thoroughly Twice!!! Let dry.
  3. zogu

    Vaperite - Am I doing something wrong?

    You can't use tank attys with this juices, contact with two wicks is critical and it is jammed very fast. Boge works great, one boge can last for ten days, but it must be used on high voltage 5-5.5 volts (start with 3.7 and increase with time). You only have to clean hole in the middle of...
  4. zogu

    Vaperite - Am I doing something wrong?

    Bought some joye 306 and they are best till now. And they last much longer then any other. For the first time I'm really enjoying this VR. Thanks.
  5. zogu

    mp2307 buck module aka KIS-3R33S Z with 2x 10440 in a 9v batt box mod

    I'm running at 5-5.5V, standard single coil smoktech cartos with tank. This is only combination I found till now which works with organic juices and it works really good. One cartomizer lasts for about ten days. At 3.7V there is no vapor production at all after few hours of using. First cap can...
  6. zogu

    mp2307 buck module aka KIS-3R33S Z with 2x 10440 in a 9v batt box mod

    I'm using electrolytic 100uf for both caps and it works without problems (3 weeks every day and all day use). i think it is not critical because this cap is behind battery, not some bad psu with lot of trash from high frequency and at 50/60 hz from network. One question, i have battery life...
  7. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    You can use thread to put it in place, and after that hole in wick holder will be enough. Just remove thread when you put it in place. You don't need mash at all. Shaka (zbogom brus li? ) I think that he is afraid how to put it/bind it together (chrys you can confirm it?), this wick is like...
  8. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    It is a same wick, but you must use 3 in parallel, original wick is also made from 3-4 pieces in parallel. here is a link: 5x atomizer glassfibre wick - atomizer DIY material Heaven Gifts
  9. zogu

    Vaperite - Am I doing something wrong?

    But how long it lasts before rebuilding :) Does it have a mash or only the wick? I have few new joye 510 and 306 attys, but i'm thinking about bulli for my next atty. I think that I will need two of them (one spare) for this kind of juices. Thanks.
  10. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    NO, it must be a fiber. Shaka wrote somewhere here, there is a fiber wick at Heaven Gifts, it is few dolars with shipping, I received mine few days ago, now i don't need mash ;)
  11. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    I tried because i have it, and I'm still alive :) I soaked it in alcohol before use. It even didn't change color after few days, copper is also used for different kinds of pots. But i will use stainless steel, i want to order it soon. Mash from old attys is perfect if you have it, and i believe...
  12. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    Believe me, it can't be more difficult than in Serbia, we even don't have PayPal... If you don't want to buy it from previous link (or don't want to wait), try with de-soldering wick, it is from copper, copper is very neutral and i'm sure that you can find it in Russia in some electronic parts...
  13. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    http://www.e-cigarette-forum.com/forum/atomizer-mods/232081-just-stainless-steel-wick-filler.html From first link on this thread you can find metal wick. Use mesh size 400. It is cheap and it will be enough for thousands of wicks ;) I would not use aluminium and you can't use folio because it...
  14. zogu

    Just Stainless Steel Wick and Filler

    Does anyone knows what is the mash count for standard mash around atomizer and on the bridge? I want to buy mash with mash count 400 from first link on first page of this thread, is this ok? Thanks.
  15. zogu

    mp2307 buck module aka KIS-3R33S Z with 2x 10440 in a 9v batt box mod

    Thanks, I will play with board, whit resistor i'm sure that i can get desired values (one in series with pot and one in parallel to get required resistance, easier than finding pot), but i will also try with diodes. I will post results here. Biggest problem is box, i don't like fabricated aa...
  16. zogu

    mp2307 buck module aka KIS-3R33S Z with 2x 10440 in a 9v batt box mod

    I ordered few weeks ago (before i saw this thread) kis modules and i hope that i will receive it this week. Now I don't have to think too much, everything is well explained, but i want it to work from 3.0 v to 6v fixed, that was plan because all vv on the net have voltage fixed like this. Maybe...
  17. zogu

    Vaperite - Am I doing something wrong?

    What hardware you are using for vaperite juices, i read your reviews (maybe one of the reasons why i bought it ;) ) and you like them too.
  18. zogu

    Vaperite - Am I doing something wrong?

    I wrote in other thread what atomizer and cartomizer destroyed using vaperite juices. Here is again: 5 cartomizer, 4 bud atomizers, 1 dc lr tank atomizer. And all that for 7-10 days, i don't know exactly. Now I'm back to china juices (also purchased from vaperite) and i don't have problems at...
  19. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    Actually i want to rewire bud tank atomizer which is very similar to ego-t, i found link for this thread from thread about cleaning bud atomizer. I don't know is it possible to completely disassemble ego-t, if it is then rewiring is possible. Soldering wires is not a big problem, i already...
  20. zogu

    eGo-T atomizer: step-by-step cleaning and maintenance by Shaka Zuluf

    OK, if HG is heaven gifts, found and ordered, new wick and heater wire ;)
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu