Search results

  1. SupplyDaddy

    When will I suffice to transition to vaping.

    You should probably try something like a JUUL. High Nic Salts, low power. Nic Salts are easier on the throat and give you the nic hit you need to power through any reason to pick up a smoke. I am not up to date on the types out there right now, especially in the UK.
  2. SupplyDaddy

    Question about safety

    If you used thinner wire before, you're going to need more power to heat up the thicker coils. But you didn't say what you normally used.. If your regulated mod can handle the ohms at the wattage you want/need, then you should be fine. They have safeties in place (or at least the ones from the...
  3. SupplyDaddy

    Bad ejuice?

    Do you actually prep your coil? Just letting it sit in the pod doesn't really cover it, especially when that isn't even needed. To prep the coil, put a drop of liquid on each of the lower ports (holes in the side of the coil, 3 or 4 of these are normal on most premade factory coils), as you...
  4. SupplyDaddy

    Wattage issue

    You don't have a wattage issue, you have a battery issue. You've been lucky with previous mods, but your battery is only a 10A battery.
  5. SupplyDaddy

    DIY tank protector?

    Tank bands have, and still are, an effective way of protecting your tank.. I had stopped using them on my Solomon II tanks.. ended up busting 2 in a week. Bands are back on! And they are cheap.. Vape Bands
  6. SupplyDaddy

    Installing coils

    It all depends on the tank. Don't over think it.
  7. SupplyDaddy

    coil question

    No, your coils can take the lower wattage just fine. If you got the vapor where you like it, that is what is important! Sounds like the .6 coils are going to be your go to coils.
  8. SupplyDaddy

    Tight Wicking

    Same here, squeak it in there, shift the coil as needed and using rayon. Only difference is I try to use all Top Air flow. And if I rush it, don't do it right, blub blub blub and mouthful of juice. LOL
  9. SupplyDaddy

    Increasing ohm's on coils

    Don't know who "almost everyone" is, but they don't hang around the wicking and coiling folks here. Metals break down, so there is a reason to trash them after a while. If you're still getting your previous flavor after burn and clean, you missed something. Heavy Double Chocolate user here. It...
  10. SupplyDaddy

    New Member Introduction

    Well, you got me on the number of vapes Not Yet in Service, but I run about 12 devices during the week.. ;) Welcome to the ECF!!
  11. SupplyDaddy

    HI

    No great recipes here, mostly all single flavors that I mix.. Welcome the the ECF!
  12. SupplyDaddy

    Burnt coils/Proper settings

    Lower than you're setting it now... The rated watts are a suggestion. Try around 50 watts or so, and it's a good idea to start low anyway with a new coil and raise it as you break it in.
  13. SupplyDaddy

    Problem with Geekvape Super Mesh X1 - KA1 Replacement Coils - 0.2ohm

    Sounds like an airflow problem to me. Is your airflow opened up? Are you actually prepping the coil, or just dropping it in and letting it soak for those 2 hours?
  14. SupplyDaddy

    Stuck with my first RTA build

    4. The cotton will last as long as it lasts.. could be a day or 3 weeks or more. Depends on how you use it, whether you burn it or even the flavors used. The coil you should be able to use for a good long while, you just need to clean it when it gets gunked up, Several ways to clean them, most...
  15. SupplyDaddy

    Heart issue from vaping?

    Were you a smoker prior/during? If so, how long/how many cigs a day? Are you old enough to smoke/vape? What nicotine level are you using? What devices? Ohms of your coils, power using to heat the coils? What type of nicotine/eliquid are you using? A heart attack from vaping? More than likely...
  16. SupplyDaddy

    Vaping makes me tired! Please help!

    Both of the devices you say you started with (Vuse and Snow Plus) use pods fill via %. That means you take the number, if it's a whole number, Add a 0 then mg, if a fraction, drop the decimal point and add mg 3% is 30mg, 2.4% = 24mg. Are you sure you have the strength of nic in the bottles...
  17. SupplyDaddy

    Ijoy Katana issue

    We are also assuming you know you have to press the power button 5 times rapidly to turn it on.....
  18. SupplyDaddy

    Anyone vape just before you go to sleep?

    Every time! Take a few hits, put it down and head to the bed, stop, take a few more.... The nicotine doesn't bother me. Neither does the coffee I drink right before I put the vape down. I'm a 6 Hour sleeper. I try to go to bed before midnight and I have an alarm set for 6:45 (usually 6:15 but...
  19. SupplyDaddy

    New vaper health concerns

    Here is a suggestion that may help many. Add something like a Protonix to your daily pill regiment (if you have one - or start one).
  20. SupplyDaddy

    Working At Home = Vaping Up A Storm

    I'm a backup for someone that can't work from home, yet everything I do is in an out of site cubical. As it is, while I cannot vape at work, I have Smoant Pasito that just barely works as a stealth vape. It's the little things....
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu