Search results
-
Kayfun fill port stripped
I ended up just ordering a new one from FastTech. Unfortunately the 3.1 I got has that stinkin fill port that I cannot get to work for the life of me (stuck top filling which I can't seem to do without dripping juice on my hands). FiL doesn't have a tap set for small metric so I just left it...- JTman
- Post #11
- Forum: Rebuildable Atomizer Systems
-
Kayfun fill port stripped
More great suggestions! Thanks everyone. I have a few small mom&pop hardware stores in the area to choose from. I'll hit them up sometime this week and see what I can work out. Thanks again everyone!- JTman
- Post #9
- Forum: Rebuildable Atomizer Systems
-
Kayfun fill port stripped
Thank you much for the advice. I will go the father in law route first and then buy an individual kit if he doesn't have it. Any advice on how to accurately measure the screwsize?- JTman
- Post #4
- Forum: Rebuildable Atomizer Systems
-
Kayfun fill port stripped
Hello everyone. I have a Kayfun with a stripped fill port. I dont know what version or who makes it. It has no markings, hex screw for the airflow control and fill port is a small phillips screw with no o-ring. Anyone have a fix for this? I just ordered one from Fasttech and I know Ill have...- JTman
- Thread
- Replies: 13
- Forum: Rebuildable Atomizer Systems
-
what to do with 34ga kanthal
My twisted 34g coil on the nova tank is vaping awesome with some cotton yarn. Never thought that old nova tank would amount to anything good. I am surprisingly very pleased with it and will make an excellent backup or just an extra to bring out for friends at parties or whatever. I made a 9...- JTman
- Post #22
- Forum: Rebuildable Atomizer Systems
-
Warning Kayfun 3.1 clone has sharp threads use caution!!!!!!!!!!!!
Im late to the thread but I found it while searching. My KFL+ cut my finger while trying very hard to unscrew the tank from the base. Thanks for the freezer tip, and I was using a gripper pad, but only on one hand. I'll have to cut it in two so i can use it with both hands.- JTman
- Post #26
- Forum: Rebuildable Atomizer Systems
-
what to do with 34ga kanthal
I made a single twist and did 5/6 wraps on a 5/64 bit and got 2.0 ohms, just what I was looking for to rebuild my nova tank heads. It was super easy to twist it up. It kinked a little bit in one spot but I just cut after the kink. Now the Nova parts I had sitting, dirty, for the last year or...- JTman
- Post #18
- Forum: Rebuildable Atomizer Systems
-
what to do with 34ga kanthal
The local vape store had some 28g kanthal for $1 per yard so I got some of that to play with on my KFL+ for now. I just cleaned out the old stash and dismantled my Vivi nova parts to rebuild it and put it away for a backup. So i made a 5 wrap coil on a 5/64 bit and it came out to 3.5 ohms, too...- JTman
- Post #12
- Forum: Rebuildable Atomizer Systems
-
what to do with 34ga kanthal
Hello, I am getting back into RBAs and I found a roll of 34ga kanthal I bought back during my first try (didn't stick with it very long). 28ga micro coils are all the rage, and I also see 30ga and 32ga mentioned from time to time, but never 34ga and I don't even know why I bought it. I have...- JTman
- Thread
- Replies: 22
- Forum: Rebuildable Atomizer Systems
-
Been a long time, need RBA advice!
Awesome news! Thank you both. I am already down to 8mg, if i can go lower, all the better =) -
Been a long time, need RBA advice!
How are they as far as leaking? Can I still toss my Reo in my pocket on the go? I literally take it with me EVERYWHERE I go! I want my head blown off! =) -
Been a long time, need RBA advice!
Looks like I'll be saving up for the RM2 then. Can't ignore the overwhelming support for it. Thanks everyone! -
Been a long time, need RBA advice!
Hello Reoville! I have been away from the scene for a long time, just been vaping my reo grand with 510 cartos for the last year or so. I am getting tired of cartos and I want to try an RBA. I see there are soooo many options, its making my head spin. E-cigs are evolving so fast its crazy... -
REOs and cartos
I 100% agree with you! I have been using boge 2.0's on my reos for about 2 years now. I love that I have never had to prefill them. I just twist on a new one, give it a squonk or two and vape away. Simply amazing!- JTman
- Post #6
- Forum: Liquid Feed APV Discussion
-
Sociology/Criminology paper on vaping? Any interest?
My wife is on track to enter a PhD program next year and her interest is in criminology. I would be more than happy to participate in a study =)- JTman
- Post #18
- Forum: General Vaping Discussion
-
VV REO Grand III
I got my VV grand in and its everything I have hoped for. I love the more rounded corners (My grand is a first-ish run that was a bit more squared off) The finish is so nice, it sticks to my hand better and isn't as slippery as my old grand. I love the silver door, I love the button, I love the... -
New Reo Mini 2.0 - A fine example of Rob's powdercoating talent
I had to coment and say how hilarious that is! :D :lol: -
Grimmgreen.com
That is one of Brit's hottest posters of all time, I can't blame him for keeping it up ;)- JTman
- Post #22
- Forum: General Vaping Discussion
-
Torn about which bottom feed mod to get
Yes! I was in your shoes before I got my first REO. I bought an Old Goat mod. He is a poster on this forum and he makes little plastic bottom feeders (and possibly other things). The one I got from him was a modded 2x AA battery box made into a 3ml bottom feeder. If i recall it was about 25...- JTman
- Post #56
- Forum: Liquid Feed APV Discussion
-
VV REO Grand III
So, what you are saying is that its just as awesome as I think it is? :D I feel like a little kid waiting for Christmas morning! Congrats to you as well. Thanks :D