Search results

  1. MISTer E

    fatty.. you ruined me

    Without further a do? adew?:glare: adieu!(thanks google:oops:) Here is m & my sorta review!, of the dream atomizer set up with my "highlyfat" & "Spin " mods to them. First a Thank You First off these units are very cleanly machined. Threads are dreamlike. I did need to needle file the...
  2. MISTer E

    Looking for a Genesis-style clone that fits FLUSH on an eGo battery. Line v2?

    SilentEcho13, The following image may be of help(or maybe not). it shows three ego thread covers on a griffin/chud thingE. (The two in the middle are the same cone.) Small tank cone also has an air hole drilled in it, that helps on some atomizers. To all reading: I am not the brightest...
  3. MISTer E

    Quick EASY fix for DID clone center pin issue

    Very crafty fix. Much akin to "plumbers hemp" or oakum, with wax acting as the tar.
  4. MISTer E

    Cobra (or any Genesis) Air Hole Expansion

    I have some small hole griffins/chids & ordered a top with the bigger hole. (DV is drilling the holes & the hole is no longer plated [just so its out there]). I am glad I bought the spare & did not drill!, because the smaller hole actually functions better. 3 inline vertical smaller air holes...
  5. MISTer E

    Idea for a top cap

    I can only Dream of what happens under the hood ;)
  6. MISTer E

    Idea for a top cap

    Hello zeesmoker (nice E sounding name:)) I have often thought the same thing. Multiple inline vertical air inlets of tiny diameter would deliver wonders over the standard Genisis one air inlet designs. I ordered a fatty V2 clone from empiremods called the "dream"(should arrive soon). I...
  7. MISTer E

    Glass tank atty

    IBtanked has glass for some of the clones. I have no clue what fits what unit or what clone name is what. Names are getting confusing[did/chid/griffin/didalike & so on:unsure:].
  8. MISTer E

    Vivi Nova Rebuild tutorial

    No, that's your decision. I mostly just made the video to give you an alternative splicing method. (I figured you used the other splice method from post #1 of this thread. It was mainly a reply to this: (I forgot to use a quote caption bubble in my last post & I am just Spin E like...
  9. MISTer E

    Wick materials. Safe vs dangerous.

    Just about all of my electronics for music are rackless. I wanted a powerstrip that was made made for music (not induce a hum) & did get that one rack unit. I mostly play Acoustic(main green ax is carbon fiber) nowadays & my electrics get used when my hands hurt from OPP (old people pains). They...
  10. MISTer E

    Vivi Nova Rebuild tutorial

    xMackx, I am assuming you were using the (V splice?) technique in Post #1[by urquidezj] of this[his;)] thread. I have no luck with it. It slips or unravels on mE. I just twist the legs on Vivi Novas(not much space for the splice). I have done the a sloppy "western union splice" on a Vivi Nova...
  11. MISTer E

    Wick materials. Safe vs dangerous.

    I first got .999 silver 30AWG, but it is flimsy & weak. I got some of this : Pure Nickel Wire Non Resistance Wire 32 AWG 100 Ft | eBay & am really liking it. I think they both have a place on my roll-a-coil ;)
  12. MISTer E

    Vivi Nova Rebuild tutorial

    I have a few vision stone/ce2 ceramic heads on the way & ordered a short down tube ViVi Nova v1 to see if the mother of all Vivi's ego510 cup will fit under the hood a little lower in it. Big Block Vivi Nova attempt #2 SOON... I have been waiting for the joke horse to appear(so I could...
  13. MISTer E

    fatty.. you ruined me

    Just ordered a couple of fatty v2 Chinese clones called "dream" from empiremods.(vapetv for 5% off) Dream Stainless Steel Rebuildable Atomizer 83 :glare: vs 14.99 :p
  14. MISTer E

    Keep getting shorts in my COV Gen 1 (First time genesis user)

    I know nothing about the provari, but I do not go below 1.8 ohms personally. .8 seems real :ohmy: low provapes FAQ page "Is there a preferred atomizer to use with the ProVari?"(Q near the middle) mentions low resistance issues & higher resistance being recommended. Frequently Asked Questions...
  15. MISTer E

    Vivi Nova Rebuild tutorial

    I want to say the following words and get back to Vivi Nova stuff. I am very much not right in the head (its ok with me I enjoy it mostly) & mrelwood is needed here. I am sad, because I was mean to him. Because that is what I accused him of doing to mE & others. Part of my illness is word...
  16. MISTer E

    Vivi Nova Rebuild tutorial

    LucentShadow, Thanks for that bunch of electric knowledge!, as if like a magnate to this post I made a few days back. Your added info on the heat induced oxide layer was soo much more than the little info the "heating element" wikipedia page had. I did try a bit to search but got frustrated &...
  17. MISTer E

    Wick materials. Safe vs dangerous.

    Apparently amazon is out of whack due to the storm & only the M2 X 4mm showed today. Metric 6/6 Nylon Screw Insulator M2 x 4mm Length (Pack of 100): Amazon.com: Industrial & Scientific These are not rubbery soft & are hard semi clear nylon, thus not likely what BJ43 sought in a co-op. What...
  18. MISTer E

    Vivi Nova Rebuild tutorial

  19. MISTer E

    Vivi Nova Rebuild tutorial

    xMackx thanks for the kind words. I love learning about all I can about vapor too & this thread especially has been a gold mine to my vapor education. I use a canon SX130is that I got for free in a marlboro contest. I really like it & likely would not have ever spent that much money for...
  20. MISTer E

    Vivi Nova Rebuild tutorial

    mrelwood your wording seems only self serving(as is mine often too) & you seem to avoid any kudos to me on any of the discoveries in my last post. Your first paragraph seems to center on that I did not use a multimeter. The AC7 on the mod ohm meter has the wire firmly seated & oxidation was...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu