They are ego style not genuine joyetech EGO. That may be a factor for you. Or not:) I have had friends experiment with them and battery drain is an issue. They do drain quicker being unregulated as well. I would go genuine Joyetech and do the Twist but I am admittedly biased:)
I would differ on this question in my response to the others. Since the darker juice left can also be mostly VG in pg vg mixes this seperation and oxidation can indeed vary nic levels. If the nic base was vg You would be getting less nic and if the Nic base was PG you would be getting more...
Also for future reference you are overtightening the clearo and charger. You dont want to snug these things down too much as there is a rubber under the center post that can become too compressed and cause contact issues in the future. Just scre it on enough to make contact for the circuit and...
This looks like a center post issue. The batt is defective. Hopefully you can contact the vendor and resolve this with a new batt. I wouldnt mess with wiggling the center post to see if it pops back up and makes contact as it will just happen again and again if the guts of the batt are...
The pic was just to identify the correct clearo I was referring to. The leaking comes from the post getting off centered in my case and could happen from it being loose as well because it separates the rubber from the tip and breaks the seal. In my situation it is the bottom band seal to the...
Just posted this recently after noticing a structural weakness in the VIsion V2
Ok so after about a month and a half with my Vision V2's I have noticed a structural fail developing. The bottom (opposite the tip) metal band has devloped a gap between it and the plastic clearo body. This is after...
Over tightening will eventually cause the post ring to deteriorate and cause batt probs more frequently and have heard that juice can leak into a "sealed" batt. Over tightening should be exposed as the ultimate user error. :(
The 2.8 ohm resistance will let you comfortably vape at thr 4.0-4.8V setting on the twist. I have tried all the resistances and this one fits bests to the twist IMO. It can handle higher voltages longer.
Ok so after about a month and a half with my Vision V2's I have noticed a structural fail developing. The bottom (opposite the tip) metal band has devloped a gap between it and the plastic clearo body. This is after normal use and no overtightenting. I first noticed that the stem inside no...
If your ego c batt is a standard batt and not a twist you should stay with Low resistance (1.5-1.8 ohm) coils as they allow your batt to perform at its peak. If you have a twist you have the option to try all resistances and see what you like by the voltage you are setting.
The replaceable coil heads are good wthout cleaning for a week to 2 then I throw them out and replace. Cleaning them is a waste of time IMO and they never work like new anyways. The clearos I havent had to replace yet. (4 months of use on the new Vision V2's)
Ok. Let us calm down. First things first. Discussions happen here over "topics". Another poster should not be attacked. Using language such as naive of you, pretending to know, and false assumption directed at another is an attack on the poster not the ideas written. Please be careful with your...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.