Search results

  1. Krizzell

    Nemesis/chemesis

    Bottom pin out too far or that small switch pin out of it? Is there a kick? If not make sure when you tightening the switch to give it a 1/4 turn.
  2. Krizzell

    Genny noob here

    Yep just hook the loop of the wire on the pocket clip of the pin and spin it keeping tension until the wire breaks, You're done.
  3. Krizzell

    Nemesis/chemesis

    I only have flat tops myself. If I don't have the kick in I take the kick (beauty) ring out.
  4. Krizzell

    "The Russian" 91% (Kayfun Lite Clone With A Twist)

    Might look that way but I guarantee it's the same that way all the parts will be interchangeable.
  5. Krizzell

    Hcigar nemmy top derlin replacement?

    I tried 3 or 4 what that does is shorten the throw in the switch and makes it hard to fire. Nope. Received another set from Fat Daddy Vapes last night and they are 1:1 copies of the real strong magnets not the ebay ones. The mod will not fire with a atomizer on it. I even put a 91% on and...
  6. Krizzell

    Batteries for sub ohm vaping

    He just did it yesterday look on Youtube or it should be on his site by now. I think the biggest problem is how to tell fake AWs and MNKE now that everyone and their mother says they have them. Buy from a good reliable vendor and not from someone who sells them for $4 with free shipping. Be safe.
  7. Krizzell

    Nemesis/chemesis

    Ok good news on getting as close to the real magnets as you can get. Fat Daddy Vapes has them not the weak ones others on ebay or the China site have. I installed some in last night very strong and will keep a AGA-T or R 91% from firing the mod, and no wobble. I ordered another set for my other...
  8. Krizzell

    Is there a kayfun'ish RBA that looks like this?

    She said everything in the circle not just the replaceable drip tip , that's what I'm talking about. I know you can interchange the tip that's not what she's talking about....
  9. Krizzell

    Which Temco ribbon wire?

    I use .5 buy a little from someplace else to see if it works for you, then get it from Temco.
  10. Krizzell

    Batteries for sub ohm vaping

    Watch Phil Busardo video on sub ohms and batteries .
  11. Krizzell

    Magneto won't fire IGO W

    Try to push down the post this happens sometimes. Get a top cap with an adjustable post so you won't have to deal with this again.
  12. Krizzell

    Built two coils so far but both are 3.4 ohm or higher. I think I know the answer?

    Yes twist the wires or use less wraps or build a micro coil. I use 32 ga but I don't get that high. You could try flat wire .5-.8 that would get you lower and covers more of the wick.
  13. Krizzell

    Where can I get a SvoeMesto (Russian 91%) cheap IN STOCK?

    You are going to pay $90 for the real 91% anyplace except the ones from China.
  14. Krizzell

    Is there a kayfun'ish RBA that looks like this?

    I use the 91% and take that tip off it gives a better draw imho. There are no replacements for that it's part of the top cap one piece.
  15. Krizzell

    Genny noob here

    Yes that's all it is .I do it with a pair of pliers and the top of a ballpoint pin. LOL I like a micro coil with cotton and 28ga wire. Quick and fast.
  16. Krizzell

    Kayfun lite (PLUS)

    They are all the same when it comes to vape. All they did was put in air control like the 91% something that should have been done first.
  17. Krizzell

    Nemesis/chemesis

    MYN=My Nemesis LOL
  18. Krizzell

    Nemesis/chemesis

    They replace the springs in the switch.
  19. Krizzell

    The Kick 2 is awesome!

    Right they all work that way set the watts and that's it even the clones. I think the two pin Kick 2 is better because it almost assures it will make positive contact with the tube. I have had that problem with the clones and some mods.
  20. Krizzell

    Are mech clones safe?

    Yes the kick will tell you when the battery is low but the vape is constant until that. As far as not getting the same power it goes up to 15 watts that's more than most people would need. You can always get just a fuse it's what $5 or so I think. This is why I tell people who are just starting...