Search results

  1. GobblerHunter

    the Vmod

    Each 2 bottle kit had 2 screw on caps for the bottles and 1 seal that goes in the metal cup where the bottle screws in. My original seal had stayed up in the metal cup until I screwed in one of my new bottles. When I unscrewed the bottle the seal was still on top of the bottle. It appears the...
  2. GobblerHunter

    the Vmod

    I just got some of the bottles off the website. They seem to be a softer plastic and not as cloudy as the original bottles. It doesn't take as much of a squeeze as I did the originals to feed the juice. They come in a two pack w/ lids and a new silicone seal to go up in the metal cup that the...
  3. GobblerHunter

    the Vmod

    Me and my Vmod spent a few days at the coast fishing and the Vmod handled it like a champ. In and out my pants pocket it was always ready to go. No leaks, no hiccups and even survived going swimming in my pocket. Dried it and the battery off, blew out the atty and let it sit in the sun and...
  4. GobblerHunter

    the Vmod

    For those having leakinig issues check your bottle. I have had an intermittent leak for a few days. Tonight I found the problem. I have a bottle that has cracked open at the point where the neck meets the top of the bottle. You don't notice it unless you put some pressure on it and the crack...
  5. GobblerHunter

    the Vmod

    I jumped out of bed this morning @ 4am and went to Vapage.com to order some of the new stuff. All I found was the same old stuff. Just got home @ 630pm and agin same old stuff on the site. WHAT HAPPENED TO THE UPDATED SITE WITH ALL THE NEW GOODIES!! I need to order some more bottles, seals...
  6. GobblerHunter

    the Vmod

    Have shot glass of Vodka that I drop atty in after every bottle or two of juice. Let soak, dry burn and it's like new again... Same atty 3 weeks now. Still has great vapor and taste.......
  7. GobblerHunter

    the Vmod

    After 3 weeks I have started to develop a leak. Haven't had any problems until Friday (9/23) then I started noticing juice coming out the bottom of my Vmod. I took the skin off and I noticed juice around the bottom of the chassis. I followed the juice trail up the chassis and found it stopped...
  8. GobblerHunter

    the Vmod

    Beaver, you might try cutting one just shy of 3/16" to see if that works better. Make sure when you thread your atty/ carto into the Vmod that you don't over tighten. Just let it bottom out, don't torque it down. If you over tighten the bottom seal will curl up and cover the slots that allow...
  9. GobblerHunter

    the Vmod

    Find a condom from a 510 carto/ atty that fits snug over outside of your Vmod atty and cut you a new seal the same size as the one that is leaking. If you cut the solid end of the condom off first so, that you just have a tube left. You can flatten it out and make a clean through cut using a...
  10. GobblerHunter

    the Vmod

    I hate it when crystal balls start asking questions.. :laugh:
  11. GobblerHunter

    the Vmod

    A Big Daddy VV 18650 VMod!!:vapor:
  12. GobblerHunter

    the Vmod

    I had a problem with my bottles being crooked to one side. If you hold the bottle against the chassis and thread it in keeping it aganst the back of the chassis it seems to thread straight and true. Haven't had any problems since I started putting the bottle on this way...
  13. GobblerHunter

    the Vmod

    Question........ I put on a 1.8 silo carto today. The gasket on the bottom that threads in was different from the ones on my attys. The carto has a clean silicone gasket that does not stick out past the threads. Is this a newer version of the gasket or the old version? To me it seems to seal...
  14. GobblerHunter

    the Vmod

    Make sure you put about 8 or 10 drops in the atty and let it sit for about 30 mins. You got to keep the juice in the 1.5's. I have to feed mine about every4th or 5th hit. Also, a freshly charger battery (14500) is putting out about 4.2 volts on a fresh charge. Least that's what my meter...
  15. GobblerHunter

    the Vmod

    SCRATCH THE #6 IT DOESN'T ALLOW THE BOTTLE TO SEAL OFF IN THE CUP. Testing the #7 out, it sits on the shoulder of the bottle instead of the neck, seems to allow the bottle to seal off in the cup..............
  16. GobblerHunter

    the Vmod

    Looks like the #6 o-ring is the correct size for the bottles. It's a little tight going on but, it seems to be the right one. I think the problem is a plastic bottle w/ plastic threads screwing into a metal cup w/ metal threads. If you cross-thread it one time it's done. I had a bottle that...
  17. GobblerHunter

    the Vmod

    For those looking for the o-rings: Lowes in the plumbing section, where they have the faucet parts. I got a #6 and #7 size o-ring to try. They are around $3.00 for 10 in a pack.
  18. GobblerHunter

    the Vmod

    Maybe Vapage will include an o-ring or two w/ the spare bottles. hint. hint, wink.......
  19. GobblerHunter

    the Vmod

    Anybody noticed they bottle loosing up?? When I go to take the bottle off to refill I find it has become loose. Or, not as tight as I put it on when full. Seems be about half turn loose and usually leaks a little toward the bottom of the bottle.
  20. GobblerHunter

    the Vmod

    Wyatt Earp rides again!! VMod w/ 1.5 atty and some FSUSA Wyatt Earp juice. Filled a bottle last night during the Nationwide race and could not believe the difference, I was use to 510 dual cartos w/ WE. Now w/ VMOD it's a whole new experience. I only have one problem; I CAN'T PUT IT DOWN...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu