Search results

  1. B

    Printed DNA30 Bottom Feeder

    So I have some concerns with my parts order from Mcmaster-Carr. They shipped my parts out today, but what is concerning me is they still haven't charged my card for the parts. Not only have they not charged me for the parts yet, they also never told me how much shipping was going to be for my...
  2. B

    Printed DNA30 Bottom Feeder

    You put an o-ring between the FD and the base of the atomizer. Once you tighten the atty down it will make a seal and prevent juice from seeping from between the FD and atty.
  3. B

    Printed DNA30 Bottom Feeder

    No I used the link in the parts list, inside the build doc, and it still shows unavailable. Redirecting I know the seller has other listings, but following the official link in the parts list gets you to a removed listing Regardless, I already have plenty of bottles from my Reo Grand, so if...
  4. B

    Printed DNA30 Bottom Feeder

    I was thinking that was what he meant in the description, just needed to be sure, thank you for the explanation. I have one last question for now The 6ml bottles referenced in the build doc are unavailable, and I don't need 50 anyways, are they the same 6ml bottles available from ReosMods?
  5. B

    Printed DNA30 Bottom Feeder

    For the Fat Daddy classic 510 inserts, it says something in the description of them(on FD website) that they need to be tapped? What exactly am I tapping threads into? I didn't see anything about needing a tap in the parts list of the build doc. Also, why are the Fat Daddy classic 510 inserts...
  6. B

    Printed DNA30 Bottom Feeder

    I got my printed parts on order today along with ordering my DNA 40 board! Next week I will order all the other parts needed, and hopefully should get everything by the time the printed parts arrive(quoted date of Nov 20th). I am so stoked and can't wait to have everything in my hands to begin...
  7. B

    Printed DNA30 Bottom Feeder

    Have you ordered from them before? I took the chance and placed an order. Thanks for the heads up! This stuff is getting increasingly hard to find these days, especially at a decent price.
  8. B

    Printed DNA30 Bottom Feeder

    According to that link, McMaster makes you order a minimum of 10 feet of tubing. So should be good for 30-40 mods lol
  9. B

    Printed DNA30 Bottom Feeder

    Nice! I can order the DNA v3.1 from sculpteo, in all mirror polished Sterling Silver, for the low low price of $2,823.75 ! At only 373.3 g it's nearly as light as a feather lol. In all seriousness, if I had the spare cash, I would order it in a heartbeat as long as everything would be...
  10. B

    Printed DNA30 Bottom Feeder

    Exactly. Where something may taste clean and pure to one person, the same thing may taste like complete garbage to another person. There is no right or wrong here just personal preference. Thankfully we have no shortage on choices for wicking medium. This is why the type of regulation Big...
  11. B

    Printed DNA30 Bottom Feeder

    For those of us that enjoy using rayon, we do so because we find it imparts the least amount of taste of any wicking medium. For a lot of rayon users they find they can suddenly taste their resistance wire over their wicking medium, as apposed to the taste of the wick masking the taste of the...
  12. B

    Printed DNA30 Bottom Feeder

    Easy enough to solder longer wires at the same time. I heard him say in the video the new board would have the same dimensions. I was just unclear if any new components had been added to the board(or old components moved around) that would prevent it from fitting in our internals properly. I...
  13. B

    Printed DNA30 Bottom Feeder

    I knew this was coming and have been patiently waiting. The DNA40 is exactly what I have been needing in my life. The real question is, will it fit in the printed bottom feeder as it is right now? ? I know the new board will be hard to get for some time likely, but it would be nice to be able...
  14. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    It shouldn't make a difference. If they were in the same place as the screws they would be far enough away from the chip to not cause any issues. When I first got my IPV I was curious about it because I planned to upgrade to magnets myself. I took a large neodymium magnet(bigger than the IPV...
  15. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    I'm all for upgrades, if they really are improvements. I am not keen at all on the fact that now instead of 2 screws there will be 4. On top of that making them 4 hex screws making it even less likely that someone will be able to change batteries when out and about. Now you have to carry a hex...
  16. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    Yes the purple Efest 18650 2500 mAh 35A. They have multiple purple ones, and they are not all good so make sure if you get them you get the Efest 18650 2500 mAh 35A. I have not tried the LG's yet, but have tested the VTC4 & VTC5 against the Efest. The longest lasting is the Efest by 6 or so...
  17. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    For what it's worth I just started testing a couple Efest 18650 2500 mAh 35A (not really 35A). I started using them a week or so ago in my IPV2. Using the exact same dripper at the exact same resistance and same wattage setting, I am getting longer run time out of the Efest batteries over my...
  18. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    Gotcha, I missed that part. It draws 20 amps from the battery but only outputs a maximum of 16 amps, according to their spec sheet anyways. Your tests show it can actually output over 16 amps, at least a small amount, and on your device.
  19. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    That's pretty much the same range I prefer to stay in myself, in case anything happens to my regulated I can switch to mechs and still be satisfied. Well it has the ability to draw in 20 amps from the battery and output 16 amps to the load. It most likely just pushes the full 16 amps(assuming...
  20. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    As atroph said, I would assume it limits the current. The device has a limit of 16 amps, which with a 0.20 ohm coil comes to 51.2 watts. I don't run this low of a resistance, so I can't confirm how much voltage makes it to the coil, nor do I care to rip a build out to test it. Perhaps...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu