Search results

  1. B

    P4U/Green Leaf IPV2 50W - Product Spec, Performance, Usage & Issues Thread

    Do you mind me asking who you purchased from on ebay? I have one coming from vapeNW on ebay. I think it sucks Phil got one that was a little screwed up, but it does to help show people that it CAN happen. Phil should have done more to mention that it has a warranty, and he should use that...
  2. B

    IPV 35w and 50w box mods

    I don't but i can give you measurements. Ipv2 height 100mm width 50mm depth 22mm Reo Grand height 95.25 width 42.86 depth 23.81
  3. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    There is no carbon disulfide in the final product, at all, whatsoever. It is 100% celluluse There is no carbon disulfide produced in the burning of rayon we use. This is different than the rayon used in clothes and such, as the rayon for clothes has been treated after the fact. Even if there...
  4. B

    IPV 35w and 50w box mods

    They have it in hand now but are going to wait until the 19th to mail it out? Is this because of your deployment, or are they just going to take that long to mail it to you?
  5. B

    The Flavor Apprentice Flavoring Thread

    That sounds delicious! I love me some vanilla creaminess in nearly all my mixes from time to time, and if I can achieve that with a flavor that only takes around 1 drop/ml, well count me in! That could make some of my recipes $/ml price go down considerably.
  6. B

    IPV 35w and 50w box mods

    There is nothing to worry about here, everyone that has purchased will have warranties. In order for P4Y to deny warranties based on where you purchased from, they would have had to release an Authorized Retailer list BEFORE people purchased from retailers. They could deny warranties for units...
  7. B

    IPV 35w and 50w box mods

    Elev8vape hasn't screwed anyone over. Elev8vape is the one being screwed over because they haven't been receiving their shipments as they were promised by P4Y. The customers that have been getting upset with elev8 have no reason to be upset. Elev8 had the disclaimer from the beginning making all...
  8. B

    IPV 35w and 50w box mods

    I had this happen to me a lot when I was trying out nichrome, my coil would be perfect looking but would develop shorts between the wraps after a dry burn to remove buildup. I could usually fix it by putting my drill bit back into the coil and repositioning the coil slightly and moving it right...
  9. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Yes the numbers are different, and I am pretty sure it says reinforced on the box somewhere. For what it's worth I have been using the reinforced stuff, it is exactly the same just with a small strip of paper running along the length of the outside on one side. I just pull it away and use the...
  10. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Listen guys the fact of the matter remains that a Vamo WILL NOT reach 15 watts unless you stack batteries, period! If you don't believe that statement then watch Pbusardo's videos on them, he clearly proves it. There are other videos out there where people hook it to an oscilloscope and come to...
  11. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Oh no you put the Reo in timeout, angels are weeping. Lol jk
  12. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I think Phil had the 3lb box. It's the same stuff just a lot more of it.
  13. B

    Wrinkled or not?

    The RM 3,4,5 are new atties Rob has added to the site, they are not upgrades to the RM2. They are clones of different atties that Rob has drilled through the post to modify for bottom feed. Here is his thread where Rob talks about them and what they are clones of...
  14. B

    help please regarding hana dna 30

    They have ones that use lipos and ones that use 18650's, both of which have enough power to fully optimize the chip just like any real DNA device.
  15. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    There are quite a few people just in this thread that use Rayon quite successfully in their Kayfuns. I have came across many other threads even different sites where people are raving about rayon in the kayfun. Maybe you can post some pictures and we can help you figure it out? Are you wetting...
  16. B

    Wrinkled or not?

    If you do the side by side wrap(folded in half with no twisting) you have to take care that the wires don't overlap each other at all or it will pop the coil. Some find it easier to just twist the wire. Either way if you use the 32g you have and do either method it will bring the resistance...
  17. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I have found with Rayon that it is almost easier to use way too much then stretch it while sliding through the coil. This seems to result in just the right thickness inside the coil every time for me. The more you stretch it while sliding back and forth, the thinner and thinner it gets inside...
  18. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    Dusty I use a 1/16th coil at 0.5 ohms and I use about 25-50% more Rayon than if I was using cotton(CVS sterile rolled cotton) and have had nothing but stellar results. The Rayon is really tight in the coil until I stretch it like JeremyR and then it is just "squeaky" snug. Edit: Micro coil by...
  19. B

    Rayon wick, better flow, flavor, saturation and Nic Hit!

    I know this is somewhat of a joke, but I would be cautious of using it in this fashion. If you thought a dry Christmas tree was a hazard before, coating it in something that burns like flash paper is only going to make that worse. Plus it just may wick the tree dry in an instant lol.
  20. B

    help please regarding hana dna 30

    We know what the suggested resistance for the chip is, that doesn't matter though because theirs isn't reading resistance accurately or consistently. This means either they need to get handy with a soldering iron, or since it is under warranty with fasttech get it replaced. The resistance...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu