Search results
-
Going Out Of Business Super-T Storewide Sale! Save up to 50%!
I have placed an order for the flat button and the flat cap over a month ago and I still haven't received them. I tried contacting them through their website over a week ago and still no response, if this is a "going out of business" sale, shouldn't the units already be made and ready to ship...- LKSkang
- Post #344
- Forum: Super T Manufacturing
-
Fogger V4!!
This is similar to my MISTer by VJ Mods and I found that you should only put the cotton approx half way down the vertical channel and it'll wick so much better. Hope that helps. Also remember, less is more. -
The MISTer Silica Hybrid by VJ Mods
I just started doing micro/cotton build and it is amazing!! I noticed that there were some wicking issues since I got the full bundle with the PMAA tank and the bubbles got trapped at the bottom and I didn't see enough bubbles form so I knew it wasn't wicking well. But then I saw a review... -
Fogger V4!!
Where did everyone get theirs from? I know fast tech has them but don't want to wait too long. Also, I'm in canada. -
The MISTer Silica Hybrid by VJ Mods
I stopped using mine for a while when I got my Precise ELA... I found that the draw was still too airy. I have since used a 2.0 kenthal twisted wire and damn, I'm in love with it all over again!! This device is meant for some heavy duty wires... I don't even bother with the 18350 mode now... -
Pictures of your setup
Not anywhere near Oolong's set up but I like mine just fine... so far anyway :D I tend to buy the cheaper clones but only after research and reviews from reputable people... but the real thing sure does look nice :unsure:- LKSkang
- Post #24,081
- Forum: New Members: Introduce Yourself!
-
The MISTer Silica Hybrid by VJ Mods
I guess I know what you mean, just until I got this unit myself I was getting so frustrated with the Hercules (Ithaka clone by Rainbow) with it's resistance-non-resistance and so many parts that could come undone that I mentioned somewhere that I wished he would make an attachment for the bottom... -
-
The MISTer Silica Hybrid by VJ Mods
As far as I know you can't just buy the top section. Also, why would you? other than being telescopic (which are a dime a dozen) this device has everything!! The firing button on mine very squeaky and would even get stuck sometimes, I took it apart and sanded it just a bit and it's now smooth. -
The MISTer Silica Hybrid by VJ Mods
I only got the hercules because todd said it was "bang on" (which he often does mind you lol) and because it would match my precise ELA better. I bought some premade coils and found the non resistance hard to work with because of their length, made my own and found that it doesn't sit well... -
The MISTer Silica Hybrid by VJ Mods
I've been using the Hercules (Ithaka clone to be said is pretty good) and I stopped because I keep having to tighten one thing or another and every time I take it apart, I'm afraid something else if going to come lose. I just got the v3 with silver plating and I really love the single unit... -
The MISTer Silica Hybrid by VJ Mods
good to hear!! I also noticed that they sell upgraded stronger springs on the website, I wonder if batch #3 will come with these pre-installed... hmm... no one has complained about the force required to fire these so they can't be bad. I can't wait to get my hands on one!! -
The MISTer Silica Hybrid by VJ Mods
I was thinking the opposite, vj mods should come up with a attachment for the atty so it can have a 510 to be used with other mods. I can't imaging it being too difficult as just needing an insulated pin in the middle and same threading on the side to connect to the base. this would allow me... -
The MISTer Silica Hybrid by VJ Mods
After looking at more pics, looks like 18350 = reg tank So I guess if I only need to buy the short tank and short mouth piece and I can also make 18350 with 3.5ml tank -
The MISTer Silica Hybrid by VJ Mods
So the tube and tank can be interchanged? So if I get a 18350 tube = short tank? Also, 18500 tube = reg tank? Last question, where did you get yours from? And what options did they provide? Thanks!! -
The MISTer Silica Hybrid by VJ Mods
Thanks for the offer, but if i can't order the unit with default PMMA I'll probably just order with it. There are aluminium battery tubes available from their site also. -
The MISTer Silica Hybrid by VJ Mods
Thanks, I'm just waiting for them to get more in stock. Anyone know what options I can choose when purchasing the standard bundle in regards to battery tube type and size and tank type and size (which would also mean suction tube). Not sure, but I think SS is the only option as standard... -
The MISTer Silica Hybrid by VJ Mods
Where did you get it? Haven't they been sold out for a while now? -
Precise ELA Telescoping Mod by Super-T!
awesome setup!! I have a question, I can't quite tell from the pics (which might just answer my question) but I know the Ithaka is polished but the polished ELA is not super shiny, are they a bit different? would you say it's more brushed or polished (the ELA I mean). the reason I ask is...- LKSkang
- Post #7,884
- Forum: Super T Manufacturing
-
Initial Review of the Noble 1 by VaperCraze/310 Vapers
almost all genesis style are not pocket friendly. you would want to go with either a tank and/or odysseus style if you want pocket friendly. in regards to leaking into the battery, a simple fix and you never have to look back. I still like it, I mainly use it at home and in the car only.- LKSkang
- Post #15
- Forum: Device Reviews