Search results

  1. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    update: 36 hours - dry as a bone :D
  2. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    that's good... there are many fixes, I'm just lazy and clumsy so I prefer the easier way and I can re-do easily if need be. I was trying the teflon tape and man was it every hard to get the right size and for it to even stick :facepalm: I figured the tip is made of silicon and it's far away...
  3. LKSkang

    Initial Review of the Noble 1 by VaperCraze/310 Vapers

    Hey guys, I just tried something new and it's worked so far overnight. I just looked at what I had to work with on me last night and figured I'd give it a try. 1) Cleaned up my my unit, took out the centre post and dried everything. 2) Cut out the tip of an old ejuice bottle I had (I attached...
  4. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    Hey guys, I just tried something new and it's worked so far overnight. I just looked at what I had to work with on me last night and figured I'd give it a try. 1) Cleaned up my my unit, took out the centre post and dried everything. 2) Cut out the tip of an old ejuice bottle I had (I attached...
  5. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    I was thinking of something like that... but you're right about it being extreme. say your battery rattles a lot, then you're kinda stuck. If what I've done doesn't fix the issue, I think I'll try replacing the shrink-wrap with something thicker and/or just add some electrical tape to it...
  6. LKSkang

    Initial Review of the Noble 1 by VaperCraze/310 Vapers

    there are several fixes, but the simplest one is tighten the nut on top where the o-ring is. just don't over tighten as that will cause it to leak as well. too lose = leak, too tight = leak. you'll know if you're over tightening by the fact that the o-ring becomes deformed. make sure the...
  7. LKSkang

    Initial Review of the Noble 1 by VaperCraze/310 Vapers

    it'll leak... had it in my pocket with a full tank and forgot I had it in there and was sitting for a good 30 mins... got up and something smelled nice... my pants :facepalm:
  8. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    yours has a hard plastic washer? mine came with black rubber o-rings and it's starting to leak. I know that they have to be tightened just right because too lose and it'll leak and too tight and the o-ring deforms and leaks. I would have thought that a harder material and tightening it would...
  9. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    it would make sense considering that they could easily rebuff and resell the product after anodizing it... well, they'd have to re-serialized it also. maybe they could have said, send the unit in and we will anodized it and send it back. this would, however, take more time but the wick would...
  10. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    just got mine yesterday... oh man this thing is light!! the top cap is damn tight... this cap ain't going no where in a hurry that's for sure.
  11. LKSkang

    Initial Review of the Noble 1 by VaperCraze/310 Vapers

    Got one... It's going to be here any day now :D I've got a uCan so no issues with carrying juice but with a tank like that I won't need to refill it during the day.
  12. LKSkang

    New Hybrid: The Noble1 from Vapor Craze

    2LOW4ZERO, I just ordered a ELA too but I'm guessing the wait is going to be a while which is why I picked up the Noble to tie me over. When did you order your ELA and when did you receive it? I just want to know rough estimate for wait times :(
  13. LKSkang

    Initial Review of the Noble 1 by VaperCraze/310 Vapers

    I'm thinking of picking one of these up, but I'm worried about aluminum leaching... apparently they aren't coated so to have my juice sitting on it and then putting it through heat and vaping it... hmm...
  14. LKSkang

    Vapor Tek USA???

    just pre-ordered the sigelei 19 and 20... hope they don't take too long :S
  15. LKSkang

    Product Requests

    you're currently out of stock of the Sigelei (which by the way is spelled incorrectly on your site) Telescopic Mechanical Bottom Mod (which I think on Sigelei's site is referred to as the Telescopic-9). When will I be able to order one? Just ordered the Sigelei ZMax Telescope v3 :) Also, I...
  16. LKSkang

    What Do You Own?

    2 - 650mah Janty Neo Classic (stainless, auto) 2 - 650mah Joyetech eGo-T (stainless) 2 - 650mah eV Torch (black) 2 - 350mah Smoktech mini eGo (black) 1 - eGo cone 1 - the Gripper along with 2 protected 18350 batteries 2 - Joyetech eGo-T type B atomizers (stainless) 4 - Vision Stardust (short...
  17. LKSkang

    Any one tried the Vision Nano 510 Bottom Coil Clearomizer

    Which is why I think they will be great along with the Gripper, I got my v-nanos, I'm just waiting on my Gripper to come in the mail :D
  18. LKSkang

    Any one tried the Vision Nano 510 Bottom Coil Clearomizer

    what kind of e-liquid you using? I'm using 100% VG and that usually prevented most flooding issues with stardusts but I'm afraid to chain-vape with these.
  19. LKSkang

    Any one tried the Vision Nano 510 Bottom Coil Clearomizer

    anyone try to dry-burn one of these yet? just got mine and am using 100% VG in them... afraid to chain-vape cause I don't see the bubbles coming up from one of the holes
  20. LKSkang

    Any one tried the Vision Nano 510 Bottom Coil Clearomizer

    Thanks for the info... in regards to the battery, I noticed that there are 800mah and 1200mah but same size... why would anyone use the lower mah when you could get 50% more without sacrificing size? Also, protected lithium-ion or unprotected lithium-maganese (apperently doesn't need to be...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu