Search results

  1. LKSkang

    Stardust V3 (good news for us stardust lovers)

    It took me a while to figure it out too. It's the ego threads for the cone that cause the airflow issue. Since there is plastic almost all the way down the metal skirt inside, the plastic doesn't allow enough air to get through which is why the ev torch works since they don't have the ego cone...
  2. LKSkang

    Stardust V3 (good news for us stardust lovers)

    just got the EV TORCH 650 batts and 4 new VISION STARDUSTS... they work BEAUTIFULLY together WITHOUT the need to drill any holes in them!! and the light ring at the bottom is awesome!! blue = 100-75%, green = 75-50%, yellow = 50-25%, red = 25-0% and a white LED flashlight when in off mode...
  3. LKSkang

    Stardust V3 (good news for us stardust lovers)

    Just ordered a set of ev torch batts. They DO NOT have the eGo threads so any airflow issue there was before with any eGo style batt shouldn't be with these. I should be getting it this week so I'll keep you posted.
  4. LKSkang

    Stardust V3 (good news for us stardust lovers)

    well, try drilling a hole and you'll notice they will all be very similar afterwards. i thought that maybe this may cause the one batt that was okay to have too much airflow, but that's not the case with my batts anyway.
  5. LKSkang

    Stardust V3 (good news for us stardust lovers)

    just got mine today... ordered 2 SR v3 and they are great so far... no cracks, the insides components seem to be placed lower than v2 as the inside metal doesn't show as much. this is probably why the v2 were cracking since they were pushing the insides too far and caused pressure cracks. i'm...
  6. LKSkang

    Stardust V3 (good news for us stardust lovers)

    just ordered 2 SR myself... i have 4 v2 and they all had some small cracks soon after but only 2 have seeped juice so far. they do say that they changed the material of the tank a little and there was talk about the fact that there were known issues with the v2 as they were trying to pump them...
  7. LKSkang

    puromizer tank material

    PC = polycarbonate = no cinnamon i guess :(
  8. LKSkang

    Janty's Customer Service

    thanks for the reply ludo... i didn't go back to my ticket after i closed it so i never read a response. i did mention that canada customs would hold the package if any nic was included but it may have been a bit more winded then simply stating "NO NIC - CUSTOMS" i'll make sure to remember...
  9. LKSkang

    puromizer tank material

    i'm not sure if this was posted somewhere, i couldn't come up with anything when i searched. i just wanted to ask what is the material used for the tank in the puromizer and if i should be wary of the type of liquid i use (i.e. cinnamon). thanks!!
  10. LKSkang

    At last... Success

    congrats on day 5!! i would think it's different for everyone as to when it'll get easier... for me, it was day 1... never even noticed... but then again, i was only smoking half a pack a day on most days. what i did notice is that i am a lot more sensitive to smoke now... when i'm vaping...
  11. LKSkang

    Neo + Atomizer?

    i've done a few dry burns with my reg neo puromizers without taking it apart (except the mouthpiece)... with the cross-wicking, will i still be able to see the coils from the top or is it another uncoiled wick on top of the coiled one?
  12. LKSkang

    Janty's Customer Service

    i like janty products, and i want to order more kits but i had a major issue with my first purchase. i had ordered a neo classic kit and specifically put in the notes that there should be NO NIC JUICE in the package as i live in canada and it will be held at customs. package comes, held at...
  13. LKSkang

    Ego Tank

    looks like a CE2 with an LED inside... a couple of questions always come up for me: 1) what's the tank material made from (cinnamon test?) 2) how's the airflow (had issues with some Stardusts before because of eGo skirt) 3) filling (do you need a syringe?) 4) cost (at $15 they are close to a...
  14. LKSkang

    At last... Success

    You have a lot to live for as do many of us... but I found that I always failed at quitting before because I actually enjoyed smoking... the feeling, the socializing, the 'get away from work for a bit' part of it... and my realization is, I won't quit unless I WANT to quit, not SHOULD quit...
  15. LKSkang

    vision stardust / clearomizer - what is it

    I don't... I just do 5 sec burn, 5 sec pause... haven't had any issues at all.
  16. LKSkang

    vision stardust / clearomizer - what is it

    when I got mine, I just filled and vaped away... but didn't taste so good because of the primer... so I would recommend rinse and dry burn... because the wick is so short, it doesn't take long to dry it with dry burns.
  17. LKSkang

    vision stardust / clearomizer - what is it

    I just dry burn mine by unscrewing the black tip, rinsing in hot water, shake out water, and attach to my eGo and 5 sec burst, 5 sec pause, etc, until I see the coils light up a nice orange from the top hole through the spike.
  18. LKSkang

    Vaping in public in Canada

    wish I had known that 3 weeks ago :(
  19. LKSkang

    vision stardust / clearomizer - what is it

    I got 4 SD of the 2nd batch... they are okay in my opinion, both pros and cons. I'm a low maintenance guy and so here are the pros: -easy to fill -easy to clean and dry burn -cheap enough to chuck if you get a bad one I'm also a little OCD so here are the cons: -have to be wary of type of...
  20. LKSkang

    At last... Success

    CONGRATS!!! your family and friends must be so proud of you! keep it up!!
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu