Got it. Now I see the clearo pin and adjusted. They all work. I don't over tighten. These were used on another 10s device that no longer works. That probably caused the issue. Thanks for all the info.
I raised the pin and no luck. I only have one device right now, although I order an MVP v2 yesterday. I also tried the coil on three different clearos and got the same non issue. As far as wiggling the connector base on the head out a bit? Are you talking on the tank or the clearo? I can't see...
Not using an adapter. I never heard of those. I have three clearos and one older coil causing the issue. I cleaned the threads on the clearos and have new coils coming.
I have some clearos I get non readings on and don't know if bad coils are causing this or if the clearo itself actually bad. Does anyone know if the clear tank gives a reading or does the reading come strictly from the coil?
I am using the 10s clearos but I swear they didn't used to go through that much fluid. I could go a whole day on one ml. Maybe I am vaping more or taking longer hits, I don't know. Is there something different I can use on the same battery? I have an IBTank but that, to me, doesn't seem to...
My iiTaste 3.0 is flying through e-juice. I can go through 1/2 ml in no time. I have not changed my habits. I can do 1/2 ml in less than one hour. I know this is not right and I am not chain vaping. What could be causing this?
I have been in communication with the seller from eBay and was told by them that the battery they sell will not work the 10s clearos. I did tell them that their listing states that it does. Be aware of these if your using something other than 16 or 30 clearos. I don't have any of those so I...
I took a file to it last night and took a half turn out. It seats fine with consist numbers now. I will check level later today but overall I think it is fine. I guess if I bought 16 clearos I would not have had this issue. I may buy those when I need replacements if it lasts that long...
Here is what I learned through this whole ordeal. When I pull the trigger up I can only screw the clearo on until it is taught. I cannot screw it all the way down like my 10s battery as I will get erratic ohm readings. If I just put it on until it is taught I get steady ohm readings in the...
Based on what you told me I got a jewelry screw driver and put duct tape on it. It worked. I was able to work the post up. Thanks all. Life saver.
Sent from my PC36100 using Tapatalk 2
It is flush with the top all the way down. Interesting. My older 10s has a screw head to correct this. The new one is flat. That design change was for a purpose, in my opinion, so you could repair them.
Well, the iTaste battery I purchased off the eBay link in the itaste thread no longer registers with my 10s clearos. They work great on my 10s battery so I know they are not the problem. I am thinking they are not getting low enough to make contact with the battery. I emailed the seller. I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.