Search results

  1. leekeylee

    Eleaf Istick

    I rebuild my kanger heads to a vertical micro coil wicked with Japanese cotton. I use a 50/50 juice and have no problems with dry hits. Running at about 13 watts on my istick.
  2. leekeylee

    What does a chimney configuration really do?

    I rebuild my kanger emow mega enclosed dual coils to a single vertical micro coil. As the mega has adjustable airflow control ring I can have this open as far as I need to suit my vaping style and I find that I get a more intense flavour and vapour production running my coils at a higher wattage...
  3. leekeylee

    my only wish right now lol

    iStick excellent mod EMOW MEGA tanks and re-build the coils to vertical Suits my needs an amazing vape
  4. leekeylee

    How to get the most out of PT2 coils?

    +1 for rebuilding, saves the pennies, easy to do and in my opinion you get a better vape
  5. leekeylee

    some suggestions

    I prefer the ease of the Kanger tanks, I have 5 EMOW MEGA and I re-build the coils myself into a vertical coil which in my opinion is a great vape. Here is how I do it http://www.e-cigarette-forum.com/forum/clearomizers/616781-rebuild-upgraded-kanger-dual-coil-single-vertical-coil.html
  6. leekeylee

    Does ANYTHING work anymore????

    I have found that leaking and flooding, gurgling dry hits a lot of the time is down to bad coils. A lot of stock coils that you buy have very bad quality control. I have 5 emow MEGA tanks and I use them all on a daily basis, 4 I keep the same juice in and one I use for trying new flavours. My...
  7. leekeylee

    coils rant and question

    I have 5 emow MEGA and I rebuild the enclosed dual coils to a single vertical coil wicked with japanese cotton. I find it a better vape and saves money. It is very easy to do if you have a bit of patience and practice makes perfect. Here is how I turn them in to a vertical coil...
  8. leekeylee

    Need help- dual coil kanger rebuild

    The cotton is about about 8cm long and just slightly wider than the coil you built. I am using Muji Japanese cotton and each "pad" has 4 sheets stuck together and I am using just one sheet so it is quite thin. The amount of cotton you use will be dependent on the type of cotton you have and how...
  9. leekeylee

    Kanger EMOW - 1.5ohm BDC vs 1.8ohm BDC

    In my experience with stock shop bought kanger coils the quality control can be shocking which is why I suggested re-building. I love the kanger tanks but depending where you get the coils from this can give you a very negative outlook on the kanger tanks when you get poor quality coils. I...
  10. leekeylee

    Kanger EMOW - 1.5ohm BDC vs 1.8ohm BDC

    As far as I am aware you cannot buy a stock vertical coil for kanger tanks as they don't make them. Only aspire do a vertical coil unless as I mentioned earlier you build them yourself.
  11. leekeylee

    Need help- dual coil kanger rebuild

    Here is how I rebuild the enclosed coils http://www.e-cigarette-forum.com/forum/clearomizers/616781-rebuild-upgraded-kanger-dual-coil-single-vertical-coil.html Use a 2mm drill bit and make sure when you wrap the cotton around the coil that nothing obstructs the coil so the air can flow through...
  12. leekeylee

    Kanger EMOW - 1.5ohm BDC vs 1.8ohm BDC

    Rebuild the coils to vertical that's what I do for my emow mega http://www.e-cigarette-forum.com/forum/clearomizers/616781-rebuild-upgraded-kanger-dual-coil-single-vertical-coil.html
  13. leekeylee

    Eleaf Istick

    Yes the eLeaf is putting out more volts as it is usin MEAN and not RMS to calculate the volts displayed on screen. It has been well documented on this thread and PBusardo has a you tube video explaining it all better than I can
  14. leekeylee

    Rebuild Upgraded Kanger Dual Coil to a Single Vertical Coil

    Go for it turning the kanger coils into BVC is such a better vape than stock coils. I am suprised Kanger have not done their own BVC like aspire have
  15. leekeylee

    reoccuring gurgling/flooding problems with full sized (5ml) nautilis?

    I have read a lot about the aspire BDC and BVC coils, some say they are great some say not so great. Personally I prefer kanger tanks and coils and rebuild the coils vertical for my emow mega. Not had any issues with leaks, gurgling or dry hits with my own rebuild coils. Here is a thread I did...
  16. leekeylee

    Rebuild Upgraded Kanger Dual Coil to a Single Vertical Coil

    Hi mogar No I don't add any additional cotton into the cup. When I wrap the cotton around the coil I make sure there is enough cotton around the coil so it is quite a tight fit into the cup in my pictures you should see that only the two legs are protruding out from the bottom of all the cotton...
  17. leekeylee

    Just ordered an Eleaf Istick

    I love my iStick one thing to keep an eye on though is the 510 thread is not the best in the world and if you cross thread it you can really damage the threading but otherwise an excellent mod and looks great with my kanger emow mega tank on it :toast:
  18. leekeylee

    Looking For a Decent BDC Clearomizer

    Kanger emow and rebuild the enclosed dual coils to a vertical coil wicked with Japanese cotton. Absolutely amazing vape
  19. leekeylee

    EMOW tanks

    The heads are very easy to re-build I do them vertically and the vape is amazing. I now have 5 EMOW MEGA tanks, all running my own build vertical coils wicked with japanese cotton. If I am not changing flavour in any one tank I get about 4 weeks out of 1 coil and cotton wick and I am quite a...
  20. leekeylee

    Haus Vape Pen Problem

    I am not familiar with the battery that comes with the Haus starter kit as I am in the UK but just quickly did a google and it looks like it has EGO and 510 threading on the top so you have quite a choice. Never used the iClear series but I am sure someone who has will reply to you about them...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu