Search results

  1. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    nice setup! Got any picks of the feed setup?
  2. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    I havent had a problem with them. what do you use?
  3. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    looks like I'm not making drip cups anymore! :banana:
  4. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    And I see no drip cup. No leaking from the top if the 510 form the air slots?
  5. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    Yes on the inside. But it looked like you had an O-ring on the top of the 510 as well.
  6. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    What does it entail? Why wouldn't I want this? Its better that what I'v been using. Madvapes 510 with a 14g blunt tip shoved in the hole.
  7. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    that would be nice. Iv been thinking of drilling out the pin just a little bit more to insert an SS tube. Then you could solder right to the side of the brass pin. Did you put a O-ring in the 510 to help seal it? Did it leak without it?
  8. disturbed1

    Has anyone ordered from Digi-Key?

    I just placed an order from Digi-key for a hand full of switched. The odd part is it didn't give a total. I told me how much the switches where and how much tax was but not shipping. Is this normal for them? I hope I didn't just make a huge mistake!
  9. disturbed1

    Fat Daddy 510, will it work as is, or is soldering required?

    Classic 510 Inserts....Thees work in the way your wanting
  10. disturbed1

    Fat Daddy 510 Bottom Feeder option :)

    Looks good. I just got a few. Just haven't had time to start anything. Was it hard to solder to that outer + nut ?
  11. disturbed1

    Which mod are you vaping with right now?

    Home made bottom fed box mod with DIY bottom fed atty.
  12. disturbed1

    She's Home!! (Chapter 2 - Another reason why REOville is Home)

    That is wonderful. I dont have a woodvil as the deal I had with Rob did not work out. But I still feel the loss of the woodvil I almost had. Its nice when finde what you need to fill that void.
  13. disturbed1

    Tried my hand at forced patina

    I think it looks great!
  14. disturbed1

    PayPal is going

    I hate PayPal anyway. Im still your friend and my money would rather not get touched by PP grubby hands.:evil:
  15. disturbed1

    Soldering is there a better way?

    Yes I was talking about the tabs on the switch. I did use flux but did not tin the tabs. I have to order more switches but I will give that a try. Those are nice switches thanks for the link. I have one like that in SS. How ever a bit pricy when you have to order a hand full of them and the...
  16. disturbed1

    Soldering is there a better way?

    Let me start out by saying I'm fairly noobish to soldering. I got a hand full of these form madvapes Horn Style Switch, Black and so far I have distroyed 3 of them and the other does'nt look vary good. I tined my my wire put a small bend in the end. I then put the bent part through the hole on...
  17. disturbed1

    Where can I find a short metal momentary push button?

    you could just shim the switch. I ran in the the same problem with my wood BF. So I just cut a piece of bras to go behind the switch to bring out a bit.
  18. disturbed1

    Fat Daddy 510 bottom feed

    just so you all know FD now has BF pins you can buy. $3.99 for 5 . Just ordered a set to check them out.
  19. disturbed1

    Missing my ohm meter......

    It should work just won't fire if its to low. I do it with my Itaste VV sometime and it works.
  20. disturbed1

    Got wood?

    Well I respectfully declined Robs offer of the Mini. He didn't blame me and agreed on the 14500. I will just hold on to the cash in my PP and grab something off the classifieds if I see something I like. If not I will grab a mechanical when the next run comes out. Or both:evil:
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu