Search results

  1. Tinkiegrrl

    Kaiser Atomizer

    Tried it. Didn't work... I can still build on it. They really should make them available for purchase seperately. I like it with a dual coil in it, but I don't like it enough to buy another when the ceramic completely breaks. Do you think a Rose ceramic cup would fit?
  2. Tinkiegrrl

    The Erlkönigin : PICTORIAL

    Wicking this tank is certainly an art form. I finally opened my tank up to change the coil, and I didn't see anything wrong with the wick. The tails were still in the juice channels, and WERE extended past the juice ring. Up by the coil, the cotton was still noticeably thicker, and slightly...
  3. Tinkiegrrl

    The Erlkönigin : PICTORIAL

    I rewick for each tank fill as well. I like changing flavors often. Seems to have happened for the last 4 tanks. Even rebuilt my coil, thinking that it must be that. I'm using 28 gauge kanthal, microcoiled around a 1/16 drill bit. Using Muji Japanese cotton for wicking material. I wonder if...
  4. Tinkiegrrl

    The Erlkönigin : PICTORIAL

    Anyone else here experiencing some gurgling/leaking issues when the tank gets low? Seems to start happening to me at the halfway point. It'll vape like a dream at first...
  5. Tinkiegrrl

    will a single coIL setup work in an rda set for dual coils

    It can be done, but the flavor may be muted due to the extra space in the RDA, and the additional airflow commonly found in dual coil RDA's. Blocking off the airflow hole that you aren't using (the one that would be for the second coil) should help some.
  6. Tinkiegrrl

    want a cold hit at .25ohm?

    And the white area around the bottom of the cartotank is whatever he used to block off the prepunched holes in the cartomizer....
  7. Tinkiegrrl

    want a cold hit at .25ohm?

    The cartotank is attached on top of an RDA where the drip tip would normally go. Looks like he added an oring to the 510 threading of an emptied out, flanged, carto. Then he inserted the carto into a carto tank, filled it with water, and capped it off with a driptip. Then he put the 510...
  8. Tinkiegrrl

    want a cold hit at .25ohm?

    Or is it just a driptip oring on the 510 threading of the carto?
  9. Tinkiegrrl

    want a cold hit at .25ohm?

    So it's a cartotank filled with water with an emptied out carto inside acting as a sort of drip tip, plus an actual drip tip on top and on the bottom to fit into the top cap of the RDA?
  10. Tinkiegrrl

    Kaiser Atomizer

    Anyone know where I can get a replacement ceramic cup for this? I broke the prongs on mine. It doesn't affect the vapor it seems, but it's currently stuck in the atomizer, and I'll likely need to break it all the way to get it out. Managed to get a build in there anyway, but I'm sure I'll...
  11. Tinkiegrrl

    TWO Years Smoke FREE !!!!!!!!!!

    Congrats!!!
  12. Tinkiegrrl

    How soon will I be able to Vape in the Pool?

    A mechanical mod may be the safest bet. Granted, the battery shouldn't be used after a dunking, but if you keep a spare one in a dry area, you could just towel off a mechanical and pop in the spare if you drop your mod into the pool.
  13. Tinkiegrrl

    Cosmetic holder as a mod/tank/atty stand?

    https://www.quirky.com/shop/765-zen-cosmetics-the-art-of-organization So, what do you girls think about this cosmetic organizer as a mod stand? Looks like the larger areas should be good to stand up your standard 22mm mods, while the smaller sections look good for the 510 connections on...
  14. Tinkiegrrl

    Hello, and advise saught

    Have you considered the IPV V2? It's a 50 watt, VW box mod with internal charger, yet the batteries can be replaced. Recessed 510 connection, but no ego threading I think... It's pricier then the MPV 2, but I think it fits more of your requirements, and as the battery can be replaced, it...
  15. Tinkiegrrl

    Making first purchase

    Either the VVv3 or the MVP 2 from Innokin are great devices. Maybe get two VVv3s (one for you and your wife) and get one MVP 2 to use as back up and a portable charging device. If you have the money, get two of each. Both devices can be used as a passthrough, so you can vape while it's...
  16. Tinkiegrrl

    Long time smoker, new vaper

    Congrats and welcome to ECF! Haven't done much research on the Series 3. Seems to be a nicer looking, 800 mAh, ego type of battery. I would be a little worried about the toppers. V2 usually uses an 808D1 type of threading, which isn't as common as 510 or ego threading. You can buy an...
  17. Tinkiegrrl

    Can someone please explain ohms significance?

    Ohms means the resistance of a coil. The higher the ohms, the more power it takes to heat the coil. It also takes a bit longer to heat up when they're higher. If you have a variable volt device, the resistance is nothing but a matter of personal preference, since you can adjust the voltage...
  18. Tinkiegrrl

    Hello Everyone!

    Welcome to ECF! You are definitely on the right track with your equipment selections. I quit smoking with a variable volt, ego type battery and a plastic, bottom coil tank. It worked with the same type of heating coils as the Mini Protank II you mentioned. A glass tank is much better then a...
  19. Tinkiegrrl

    Saying Hello

    Replies to other threads here in the newbie section count towards the 5 as well.
  20. Tinkiegrrl

    Fully charged itaste vv discharges when connected to atomiser

    Hold down both the + and - buttons at the same time. The higher the resistance, the more power the battery must put out to fire it. Without a topper, the battery isn't really putting out power, which would explain why it doesn't drain without a topper on it.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu