Search results

  1. candre23

    NotCigs Terminator Pre-Review

    Haven't tried it with an 801. The adapter is only going to be made in 510 and 901, so you'd have to use an adapter. Other than that, it should work the same no matter what atty you use. Length will depend on what atty/cart/tip you're using. The indulgence with the terminator, a 901 atty and...
  2. candre23

    Oppinions on Janty Stick

    As a 10440 mod, it doesn't have great battery life. Its only real selling point is that it has built-in USB charging. But if you really want USB charging, you can get a bartleby for less money, and it will last a lot longer with its 14500 battery.
  3. candre23

    NotCigs Terminator Pre-Review

    If you want to run LR attys at 4+ volts, the terminator will certainly do it. I still wouldn't recommend it, but if you have a bunch of LR attys and don't mind them popping more often, then game on. :D
  4. candre23

    Cast Resin Juicer

    With something as soft and flexible as silicone, the paint will likely crack and flake off. What you want to do is dye it. Mixing dye in with the resin while it's liquid is best, but you can probably dye it with RIT after it's hard as well. EDIT: Need to read harder. The mold is silicone...
  5. candre23

    NotCigs Terminator Pre-Review

    That would be pointless. I only have one spare LR 510, and I'm not going to pop it just for the heck of it. LR attys are for low voltage devices that need the wattage boost. You can get a lot more of a boost using this with regular attys. A 1.5ohm atty at 4.2V is 11.76W. You get the same...
  6. candre23

    Bartleby PV review

    Can you link to the video? It may have been a one-off or a prototype, because none of the mods listed for sale on his site have USB charging built in.
  7. candre23

    NotCigs Terminator Pre-Review

    BuzzKill credits my 5V RIT with inspiring his latest project, the Terminator. In appreciation, he was kind enough to send me a prototype for testing. The Terminator is a simple device that only does one thing, but it does it well. It's basically a variable-voltage regulator stuffed into a 901...
  8. candre23

    Lost in vaper

    Double post.
  9. candre23

    Lost in vaper

    I had trouble getting to sleep when I first started. I think the reason is that with vaping, the nic takes a little longer to get into your system, then hangs around longer. If you just stop vaping half an hour before bed, you should be fine. As for the 016, it's good for what it is, but it's...
  10. candre23

    The " Terminator " !!!

    Mine's definitely not sealed. I can suck air through the connector. Maybe it just needs a bit more solder? I guess this is why you do beta runs. :p
  11. candre23

    The " Terminator " !!!

    Got out the meter and did some tests. Used my Indulgence with two freshly charged 18350 batteries. Battery voltage: 8.38v unloaded & unregulated Battery voltage: 6.62v unregulated with 3ohm load Regulated voltage with 3ohm load: Turns - Voltage 0 - - - 2.43 1 - - - 2.59 2 - - - 3.11 3 - - -...
  12. candre23

    The " Terminator " !!!

    Just to clarify for those who are still confused, those results are with two of those battery types. You need two batteries for this to work. It's not like the TI booster board - it doesn't increase voltage. You cannot use this to get more than 3.7V out of a single battery. My beta...
  13. candre23

    Lost in vaper

    +1 on the PG/VG mix. 80/20 or 70/30 seem to be about the best ratio. 100% PG is too dry, and 100% VG is too weak IMO. The juice you got is almost certainly 100% PG, since that's pretty much all they make in China. A mix will give you more vapor and be easier on your throat.
  14. candre23

    Lost in vaper

    It's not as much "all the same stuff" as it looks. Most of the US juice vendors mix their own, and they all have different flavors / qualities. What you most likely got at the head shop was cheap, rebottled Chinese juice, which is not very good. Try a couple different US brands and I think...
  15. candre23

    Absolute longest lasting battery?

    There are other factors. 10440s are rated for about 350mAh, but their discharge rate is very low. That means they're less efficient than larger batteries when feeding high loads (like ecigs) and your run time will suffer for it. Four hours of moderate vaping is possible, but it's also...
  16. candre23

    Absolute longest lasting battery?

    The tekk runs them in series, so capacity is not doubled. It does use a switching regulator though, so you will get better battery life with the tekk than you would with a mod that uses a linear regulator (nearly all other 5V mods), but not as much as you would from two 18650s in parallel.
  17. candre23

    USA Liquid Suppliers - Cost Per ml + Shipping Chart

    No problem. I'm willing to add any other US shops that anybody cares to suggest.
  18. candre23

    The " Terminator " !!!

    I think you guys might be giving me a bit too much credit here. I may have been the first to post the idea and a tutorial for making one, but my original RIT was a simple 5V only device. And I'm sure other people have thought of doing something like this long before I did. Buzzkill took it...
  19. candre23

    Joye Ego Fakes?

    These are knockoffs of the ego, which is itself a knockoff of one of Cisco's laser mods. Everybody copies everybody, and that's really not a bad thing for us consumers, because competition makes for lower prices. If you come up with a good idea, eventually somebody will steal it and sell it...
  20. candre23

    USA Liquid Suppliers - Cost Per ml + Shipping Chart

    Added Electronic Ash and One Stop DIY Shop.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu