Search results

  1. KenD

    Ijoy Captain PD270 - 20700 dual battery

    M1 and M2 are adjustable temperature presets, you adjust the tcr from the menu. Does the wattage fluctuate and do you hit the temperature protected message when you're using the m2 coils? Sent from my K6000 Pro using Tapatalk
  2. KenD

    How often do you change your sub-Ohm cotton/coils?

    I change my cotton every two or three weeks, sometimes longer, and recoil once in a blue moon, when I get bored. I use ss and tc so the wicks last a long while and the coils hardly deteriorate. Sent from my K6000 Pro using Tapatalk
  3. KenD

    How many years you are a vaper and how much do you vape per day?

    4 years and some months. 10-20 ml DIY liquid per day. Usually 50/50 and varying nic level, .5-3 mg. Sent from my K6000 Pro using Tapatalk
  4. KenD

    Why Kanthal?

    It doesn't really work like that. If you check steam-engine you'll notice that identically wrapped ss and kanthal coils have similar heat flux and heat capacity at the same power level. Sent from my K6000 Pro using Tapatalk
  5. KenD

    Ijoy Captain PD270 - 20700 dual battery

    Are you sure those are actually ss wire? Doesn't state so on the Smok site and I've seen kanthal coilheads with an ss marking simply because the housing is ss (Kanger...) Sent from my K6000 Pro using Tapatalk
  6. KenD

    SMOK Alien 220 VB* Firmware Upgrade

    1.3.2 is the programming tool, not the firmware. Unfortunately I don't believe there's gonna be any new firmwares beyond 1.2.11 :-/ Sent from my K6000 Pro using Tapatalk
  7. KenD

    Why Kanthal?

    The lower resistance really isn't a problem. The amp draw is calculated from watts so at the same wattage you won't be drawing any more amps even though the resistance is lower. Sent from my K6000 Pro using Tapatalk
  8. KenD

    SMOK Alien 220 VB* Firmware Upgrade

    1.2.11 is the latest (and looks to be the final) firmware. I wouldn't recommend upgrading though. My Alien worked better with the 1.2.1 firmware, whereas 1.2.2 and 1.2.11 are both worse. A shame that I can't find the original firmware anywhere :-/ Sent from my K6000 Pro using Tapatalk
  9. KenD

    Smok Alien 220w misreading Ohms

    There's a good likelihood that you'd burn the rubber insulators on the clr coils so better not dry burn anyway. Sent from my K6000 Pro using Tapatalk
  10. KenD

    smok big baby beast build

    Ohm readers won't be any better than most regulated mods. In fact, on regulated mods you can adjust the power, whereas on ohm readers you can't and therefore risk overstressing the batteries if you fire a very low build. Sent from my K6000 Pro using Tapatalk
    • KenD
    • Post #23
    • Forum: RTA
  11. KenD

    Smok Alien 220w misreading Ohms

    The tc on the Alien is not very good anyway. I use it in tc, but my build can handle fairly high power. The tc on mine is pretty much only a worst case scenario safety limit. Sent from my K6000 Pro using Tapatalk
  12. KenD

    Bench Test Results: Which lasts longer? VTC6, 30Q, or HG2?

    Yup, mine too Sent from my K6000 Pro using Tapatalk
  13. KenD

    Eleaf iStick "pico"

    For me they do. Granted, I don't use my Picos as much as my rx200, Alien, or Predator. The tc on Wismec/Eleaf/Joyetech mods works much better than the tc on the Alien. Sent from my K6000 Pro using Tapatalk
  14. KenD

    Ohm Reader Help

    No resistance readers are perfectly accurate. Sent from my K6000 Pro using Tapatalk
  15. KenD

    Black mod with chrome tank, does that go?

    If you're into death metal it really should be all black :-) Sent from my K6000 Pro using Tapatalk
  16. KenD

    Sub ohm questions

    On a regulated mod the resistance of the coil doesn't factor into the amp draw, watts do. With a 20-amp battery (LG hg2, Samsung 30q, Samsung 25r etc) you're good up to about 60w, no matter the resistance of the coil. Sent from my K6000 Pro using Tapatalk
  17. KenD

    Stupid question from a new user, thanks!

    There's nifethal, tungsten and several other wires that can be used in temp control as well. Sent from my K6000 Pro using Tapatalk
  18. KenD

    advice on dogetank ss316 mode

    The Wismec rx75 has a similar locking switch. Sent from my K6000 Pro using Tapatalk
  19. KenD

    IJOY Captain PD270 firmware update has been released

    That would adjust the power, not temperature :-) Sent from my K6000 Pro using Tapatalk
  20. KenD

    IJOY Captain PD270 firmware update has been released

    Is the temperature control any better with the update? Sent from my K6000 Pro using Tapatalk
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu