Search results

  1. KenD

    Wismec RX200 firmware V3.13 - pseudo charging

    It's only for DNA boards. However, you can install the ArcticFox firmware on most modern Wismec/Joyetech/Eleaf mods and use the included monitoring software. Sent from my K6000 Pro using Tapatalk
  2. KenD

    Looking for vv/vw tube mod

    I don't have any personal experience, but Dicodes mods seem to be very highly regarded. Sent from my K6000 Pro using Tapatalk
  3. KenD

    Eleaf iStick "pico"

    The Pico is considerably cheaper though - four to five Picos to a Hcigar - so that would at least partly explain why it's so popular. Don't get me wrong, I love the Pico and actually prefer Wismec/Joyetech/Eleaf chips to the DNA (I have a Reuleaux DNA200), but price needs to be noted in this...
  4. KenD

    Sigelei Fuchai 223 Psa

    Number of wraps? Diameter? Wire dimensions? I have no experience with flat wire so I don't know if that qualifies as a lot of coil mass or not. Sent from my K6000 Pro using Tapatalk
  5. KenD

    Sigelei Fuchai 223 Psa

    Are you using a particularly beefy coil? Apparently the Predator will push you out of tc if it doesn't register change in resistance fast enough, and with a large coil mass that change in resistance won't register fast enough. Sent from my K6000 Pro using Tapatalk
  6. KenD

    Interested in Uwell Crown 3 but my VT167 has 6V cutoff

    A .25Ω coil will rise to about .32Ω maximum, around 600℉, so you should be good to 112w or so. Sent from my K6000 Pro using Tapatalk
  7. KenD

    Uniform firmware for many devices - ArcticFox + NFirmwareEditor

    The calculations are based on Celsius whether you adjust the temperature in ℃ or ℉. You don't need to change the tcr if adjusting in ℉, it's the same as for ℃. Sent from my K6000 Pro using Tapatalk
  8. KenD

    Eleaf iStick "pico"

    It should be noted that the dna75 is more limited than the dna60 in what wattages are possible with certain resistances. The 75 has a maximum output voltage of 6.2v and the 60 a maximum output of 9v. Sent from my K6000 Pro using Tapatalk
  9. KenD

    Is getting a mech mod worth it?

    I don't think a direct to battery mech is a good place to start. Sent from my K6000 Pro using Tapatalk
  10. KenD

    Is this safe?

    With regulated devices the coil resistance doesn't factor into the amp draw. Furthermore, the amp display shows the output amps, not the amp draw at the battery. This is how you calculate the amp draw: Watts / battery cutoff voltage (the voltage off the battery when you need to recharge) =...
  11. KenD

    Can I drip on RDTA?

    I like the Limitless and Limitless+, but there are many newer ones that I haven't tried out. There are probably better RDTAs out there nowadays. Sent from my K6000 Pro using Tapatalk
  12. KenD

    Is it Safe?

    You most certainly need to consider the amps. Resistance doesn't factor into the amp draw though. This is how you calculate the amp draw: Watts / battery cutoff voltage (multiply by the number of batteries in a series mod) = amps. Divide the amps by .9 to account for device inefficiency. Sent...
  13. KenD

    Battery Configurations in Regulated Mods

    It's likely that it's the output amps. That's unrelated to the input amps, the amp draw at the battery. For example, a .1Ω coil at 5v would give 250w, but provide 50 amps at the atomizer. You would therefore not be able to get more than 250w because the output amp limit had been reached. Sent...
  14. KenD

    Charging G-Priv

    Indeed, but the battery life would be great :-D Sent from my K6000 Pro using Tapatalk
  15. KenD

    Charging G-Priv

    Would help even more than you thought with the battery drain though :-) Sent from my K6000 Pro using Tapatalk
  16. KenD

    Charging G-Priv

    I use my phone for all my internet, tethering all other devices to it. Sent from my K6000 Pro using Tapatalk
  17. KenD

    Charging G-Priv

    I sure can't. I'm thinking I need some rehab for that myself :-D Sent from my K6000 Pro using Tapatalk
  18. KenD

    Battery Configurations in Regulated Mods

    With series configurations you have more voltage available, which means less amps drawn from each individual battery. Example (four batteries, mod set to 120w, calculated with a battery cutoff at 3v. Note that I don't take the chip inefficiency in count here): Parallel: 120w / 3v = 40 amps...
  19. KenD

    Charging G-Priv

    There's a huge difference in the amp draw on mobile phones and mods though. It's not really about the battery chemistry, but about the strain on the battery. Sent from my K6000 Pro using Tapatalk
  20. KenD

    Is there a 'direct' upgrade to the istickTC40W ?

    Exactly. With more batteries you'll have more stored energy available, that's the simple fact. Beyond that chip efficiencies comes into play. Sent from my K6000 Pro using Tapatalk
View older results
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu