Search results

  1. xMackx

    Inside the Drunker Tank

    Yes but you have the colors backwards.
  2. xMackx

    Different Cottons for different wicks

    I now use my cotton rounds exclusively. They're the strongest of the cotton wools, easiest to work with, have the least leaking problems out of all other cottons I've tried, and the most forgiving because of their absorbency.
  3. xMackx

    Inside the Drunker Tank

    This is the best wick setup I have made with my drunker tank. Small coil the width of the slots, 4 wraps side by side with 33 awg kanthal. I have the main cotton round wick threaded through the coil leading down diagonally through wick holes. Then 2 seperate wicks for the remaining wick holes in...
  4. xMackx

    Inside the Drunker Tank

    Here is the thread I was talking about about cleaning your tanks if anyone wants to read. http://www.e-cigarette-forum.com/forum/general-e-smoking-discussion/334183-coincidence-not-you-decide.html
  5. xMackx

    Inside the Drunker Tank

    I'm sure I could mix up that flavor for ya, just don't ask about the ingredients. j/k
  6. xMackx

    Inside the Drunker Tank

    None yet, the legs are longer wich helps. In the process of building a wire welder, my favorite awg is 33 and the legs alone takes up an inch of wire. No singe marks on the rubber grommet yet though.
  7. xMackx

    Just For LM2596 Users

    Haven't received my LM's yet but since the voltage adjustment is by turning a screw I am wondering if it would be possible to connect a larger dial up to it.
  8. xMackx

    Inside the Drunker Tank

    Well it made me realize how careful we need to be with the original ceramic cups in our drunker tanks because ceramic is pretty delicate. Thanks for sending them to me to play with. I feel better knowing I have a backup cup for my drunker.
  9. xMackx

    Resistance-No Resistance wire welder

    Stopped by walgreens and picked up 2 Fujifilm disposables, I got the outer shell apart. I pulled out the flash circuit and to make sure the cap wouldn't zap me I touch my pocket knife to both leads on the cap and the spark scared the crap out of me. lol
  10. xMackx

    Different Cottons for different wicks

    Silica is safe to us humans in every way unless you inhale it, which ironically might be what we're doing. Another 50 years of research will be needed to find out any long term effects really. Cotton is the flavor for me though anyways.
  11. xMackx

    Inside the Drunker Tank

    I tried the spin-e coil in my drunker today, still needs some tweeks to get it working right. I did find that the ce2 ceramic cups can fit into the drunker (with help from JD). They do sit a bit higher but definitely are interchangeable. Thank you JD for sending me those, I broke one but got the...
  12. xMackx

    Inside the Drunker Tank

    Well the no cup setup tastes bad lol. I think I messed with the air flow a bit, also didn't wrap my coil wraps close enough so time to rebuild today again.
  13. xMackx

    Resistance-No Resistance wire welder

    Here is a circuit diagram of how a camera flash circuit works. (for newbs like myself) HowStuffWorks "How Camera Flashes Work"
  14. xMackx

    Inside the Drunker Tank

    I started having a slight dry hit every once in a while (because I'm a chain vaper) so I decided to try a thicker wick but when it comes to cups you can't make the coil bigger than the slots or else things get choked. So I just got done installing a larger coil without the ceramic cup in and the...
  15. xMackx

    Inside the Drunker Tank

    Yeah heating the wire before hand with a lighter tempers the steel so it's more malleable so it holds it's shape. Adeline is correct on removing machine oils during manufacturing. Also if you are using stainless steel mesh, oxidizing the coil makes it a lot easier to prevent short circuits. Also...
  16. xMackx

    Just For LM2596 Users

    Love the thread, even though I have not read through it all. I just bought a couple LM2596's with voltmeters and can't wait to start my builds. What gauge/awg wire is ideal? I know gauge and awg are different measurements.
  17. xMackx

    Inside the Drunker Tank

    I noticed that too, all of the sludge that normally collects on a wick seems less in the drunker and what does collect is contained away from the juice. I've been vaping on mine for a week and none of it has got into the tank. I just placed a couple orders as I'm going to be building some vv...
  18. xMackx

    Making a VV box mod, help

    What red and black electrical wire should I buy? I noticed madvapes doesn't sell just electrical wire.
  19. xMackx

    Inside the Drunker Tank

    Oh there will be plenty of throat hit... of burnt cotton. lol
  20. xMackx

    Inside the Drunker Tank

    You can vape cotton after a 3 hours of soak time but longer is better. I would recommend cotton wools like cotton balls or rounds for anyone starting to rebuild with cotton because they are the most forgiving...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu