Search results
-
Official ProVari 3 Thread - P3
From what I've seen so far, the P3 is going to like 1.2Ω ± 0.4Ω (depending on the wattage you vape). -
Official ProVari 3 Thread - P3
Am I wrong that you have version 35? This only seems to have appeared in version 36. -
Official ProVari 3 Thread - P3
Are you not getting the flashing error on the main screen with that 2.0Ω coil and BoosT on? (Do a short button click) edit: I'm trying to figure out the maximum resistance that can use BoosT. For me, 1.8Ω works, 2.2Ω errors, but I don't have anything between those two right now. -
Official ProVari 3 Thread - P3
With BoosT off, 1.8Ω is the highest resistance you can use to get 20W because of the 6.0V limit. 2.0Ω will get up to 18W at 6.0V, 2.5Ω will get up to 14.4W at 6.0V, and 3.0Ω will get up to 12W at 6.0V. -
Official ProVari 3 Thread - P3
They'll find him in the stall... curled up in a fetal position, stroking his P3, and chanting, "My precious, my precious" :laugh: -
Official ProVari 3 Thread - P3
:banana: :banana: :banana: YES! :banana: :banana: :banana: Congratulations! -
Official ProVari 3 Thread - P3
Congratulations, Zombo. Will they write you up at work for Public Display of Affection? :D -
Official ProVari 3 Thread - P3
From what I've seen, if they're 1.8Ω or less, yes, they'll work with BoosT. For a grunge margin, I'd shoot for 1.5-1.6Ω max. OTOH, I also probably wouldn't build lower than 0.8Ω to have a little above the 0.7Ω lower limit. -
-
Official ProVari 3 Thread - P3
Haven't been there. I don't think I'd need that much even with some of the 26 AWG Kanthal or Nichrome I use. -
Official ProVari 3 Thread - P3
This morning I checked my IQ and it was 66. All I did was slightly loosen and retighten my tubes (18650) and cap, and IQ went back up to 96. Twisting the spring (large, final release version) clockwise in the end cap brought IQ up from 93 to 96 this weekend. This is with a year-old, lightly... -
Official ProVari 3 Thread - P3
I did not try going down to 1 because as I understand it, the power/voltage amount of boost is the same for all boost levels and the setting is just time... 0.25 seconds x boost number. Perhaps that isn't the case. -
Official ProVari 3 Thread - P3
Thanks for the quick reply, sir. Yes, you'd see the error (an ! in a bell (flat top triangle)) flashing alternately with the Ω symbol or the word BoosT on the main display. I get the error with 2.2Ω and above but not 1.8Ω and below. Haven't been able to try anything in between. It doesn't do... -
Official ProVari 3 Thread - P3
Are you not getting a BoosT error with a 2.1Ω coil? -
Official ProVari 3 Thread - P3
Here's to lots more P3 deliveries today! :toast: Tip for new P3 users: Your P3 will probably ship in the Variable Volts mode. (Volts over Watts on the display) To get it into the Variable Wattage mode: Click the button four times to get into the menu Click on A up arrow or A down arrow... -
Official ProVari 3 Thread - P3
Looks like you may throw your back out shoveling snow tomorrow, Peter. -
-
Official ProVari 3 Thread - P3
IMO, I could not have built a better menu system for use with one button. I would expect to see Battery Charge, Ohms, and IQ in RCL -> INFO; however, since that is already pretty crowded, and these items have to do with power and firing, I understand why they're in A up and A down In A up and... -
Official ProVari 3 Thread - P3
EXECUTIVE SUMMARY: It appears use of BoosT is limited to resistances of 1.8Ω* and lower. DETAILS: With Boost On (2B), regardless of the voltage or power level set (even if as low as 3 watts), if the displayed resistance is greater than 1.8Ω, whatever's displayed in the upper right will... -
Official ProVari 3 Thread - P3
Okay I'm throwing in the towel. I never vape this much for more than an hour or so. I have no idea how much juice I used since I was dripping, but it was as non-stop as I could manage without popping the coil. At 9.6W with Boost on #2, the 1600 mAH AW IMR went about 5 hours and 20 minutes to...