Search results
-
Official ProVari 3 Thread - P3
I went through 2,000 - 2,200 mAH yesterday. For some reason, I subconsciously vape literally twice as much at 1.8-2.0Ω as I do at 0.8Ω (mechs). That seems true for the P3 at the higher resistance/lower power. -
Official ProVari 3 Thread - P3
Robin, I don't know how frequently you vape, but at the low, 6.2W you use, an 800 mAH 18350 may last you all day. -
Official ProVari 3 Thread - P3
RTD usually isn't out of stock long. Hang in there. With a 20A rating, the 2200 should have a lower impedance than the older 10A 2000 mAH I use. -
Official ProVari 3 Thread - P3
From page 11 of the Owner's Manual: -
Official ProVari 3 Thread - P3
No-Ox Info They make a point of noting they don't use metals in it, such as zinc (like No-A-Lox). Like Bronze, I don't use anything on my mod threads, especially the ones that get used frequently like end caps. OTOH, If I was staying at one battery size, I might use something on the extension... -
Official ProVari 3 Thread - P3
Version 37 will come out in two releases: 37V for vaper and 37G for geek. IQ only in the latter. -
Official ProVari 3 Thread - P3
I think 360 is letting us try to figure this all out by ourselves before weighing in. :) -
Official ProVari 3 Thread - P3
I didn't mean 0 volts… I meant the mod's "0". -
Official ProVari 3 Thread - P3
Let me add this… batteries that have been used in a mech, even at 0.5Ω, have been relatively babied. As voltage went down, so did current drawn. Batteries that have been used in a regulated mod have been absolutely brutalized--the weaker the battery, the harder it's worked, especially if it's... -
Official ProVari 3 Thread - P3
Yep. If I hadn't had these three almost new 18650s, I'd have bought three new AW IMR 2200's for the P3. I still may get some new 18350s from RTD. -
Official ProVari 3 Thread - P3
Possibly twice as much contact area. (increases by the square of the radius/diameter increase of the flat area) -
Official ProVari 3 Thread - P3
I don't know if the P2's just measured (and based cut-off) on just battery voltage. From what I'm reading in the manual, the P3 is much more complicated than that. It states remaining battery life will change with power setting (and I suspect IQ as well). IQ was implemented because of the amp... -
Official ProVari 3 Thread - P3
Looks like a much flatter contact area on the new ones, at least to me. -
Regular Atty Drippers (A Dying Breed?)
I learned something. Thank you!- NicoHolic
- Post #2,029
- Forum: Atomizers, Cartridges and Cartomizers
-
Official ProVari 3 Thread - P3
The 96 I'm reporting is with three one-year-old AW IMR 1600 aAH 18650s that each have maybe 10-12 charge cycles (from 50%) on them. I'm only getting 80 with three 16 month old AW IMR 2000 mAH (10A) 18650s that each have well more than 100 charge cycles (from 50%) on them. I'm getting... -
Official ProVari 3 Thread - P3
I use your mineral oil on my straight razors, so I've got a bottle of that. :D Maybe I'll get 97. Edit: just bought some gold-plated contacts to upgrade my older REOs. Still waiting for that gold-plated spring from ProVape. -
Official ProVari 3 Thread - P3
Just for fun, I wiped the threads with a Tuf Cloth, a non-oil protector I use on my carbon steel blades (not the ones for food). IQ dropped from 96 to 95. -
Official ProVari 3 Thread - P3
My IQ is still at 96… IIRC, it doesn't drop as I vape. When I put the tubes and end cap on, I pull them away from the mod just a little and I screw them back and forth a few degrees each way to clean the threads before I screw them home tight. -
Regular Atty Drippers (A Dying Breed?)
I bought a few when I got my REOs to keep in the vehicles as backup in case my RM2 coil failed. I just opened one and it's bridged, not bridgeless like the ones I buy from Empire Mods.- NicoHolic
- Post #2,027
- Forum: Atomizers, Cartridges and Cartomizers
-
Regular Atty Drippers (A Dying Breed?)
I never asked, but that would be my assumption too.- NicoHolic
- Post #2,025
- Forum: Atomizers, Cartridges and Cartomizers