Search results

  1. Crash Moses

    Voltage Drop

    Yup...it depends on your resistance and type of battery. Higher resistance will show a lower voltage drop than lower resistance. The AW IMR 1600 mah batteries have a lower internal resistance than the 2000 mah variety (to the tune of about .1 volts). Depending on what setup I'm using my...
  2. Crash Moses

    Bluish hue mixed in with the vapor

    In bright sunlight I can see the vapor linger in the air like dust motes but it's never had a color...always white. I'd say it's the lighting in the room that's causing the bluish hue and not the vapor itself.
  3. Crash Moses

    I have some cash to spend, looking for suggestions?

    I hate jumping into a thread after 30 posts just to repeat what has already been said... ...so I'm not going to. (I lied...get a Reo)
  4. Crash Moses

    Just Curious... Skin For ProVari

    I'm sure they can get it to fit without resizing too much. However, the Sigelie 19 has so many moving parts they sent me two wraps when I ordered...I had enough left over to wrap my RSST. No such concerns with the Provari...
  5. Crash Moses

    Igo-w Dual Coil High (how to get 1.8-2.2 ohms while rocking 2 coils?)

    It's a Reo Grand bottom feeding mechanical. I like it so much I bought three. As for your coil...much better! Try dry firing it until the coils are nice and orange and then squeeze them together and hold them with a pair of needle noise pliers (after you let go of the fire button!). You want...
  6. Crash Moses

    Vape mail turns into 7hr journey!

    lol...glad you finally got something to work for you! Now...for your next mission...dragon coils!
  7. Crash Moses

    Just Curious... Skin For ProVari

    Awesome...you'll need to get a topper that matches. The color changing snake skin on my sigelei 19 above would do the trick. I used the leftovers to do my RSST. I think that would closely match the colors in your skin. You can kinda see it here...it's the one in the middle. Light isn't that...
  8. Crash Moses

    Just Curious... Skin For ProVari

    And because I haven't posted any in awhile...it's picture time. All J-wraps.
  9. Crash Moses

    Igo-w Dual Coil High (how to get 1.8-2.2 ohms while rocking 2 coils?)

    No worries...we're here to help.:) It's hard to tell from the picture but it looks like your coils are a little too loose. And what ohm is it? This is a 1.2 ohm dual coil with 28 awg. While not my prettiest coils this is what you should be shooting for. And it's not an IGO but the principal...
  10. Crash Moses

    So many mod idea for a reos... But no one has thought of this!!!

    Yup, that's exactly how I do it. Very little repositioning required.
  11. Crash Moses

    Need help on iGo-W

    This. And this. Stick with a single coil until you can get some 32 awg. A 1.2 ohm single coil should vape nicely (with a drilled out air hole).
  12. Crash Moses

    Issues with Vape FX?

    No worries...I like to theme my mods too (although in a more manly vein...because...ya know...I'm a man). If worse comes to worst you can't go wrong with J-wraps. I've purchased four different wraps from them for four different mods...never had an issue and the wraps still look like the day I...
  13. Crash Moses

    No more clones

    And you don't need to wash them straight out of the box.
  14. Crash Moses

    Igo-w Dual Coil High (how to get 1.8-2.2 ohms while rocking 2 coils?)

    Yup, eight or nine wraps is the rule of thumb for whatever resistance you're shooting for. Just did another quick experiment...17 to 18 wraps of 28 awg to get 2 ohms. Extremely slow to heat even on my Provari at 5.5 volts. So...even if you did get it to work the vape quality is going to suffer.
  15. Crash Moses

    Igo-w Dual Coil High (how to get 1.8-2.2 ohms while rocking 2 coils?)

    If you ever go the mechanical route you'll be in good shape.:) But yeah, you're going to find it difficult to get 3 ohms out of 28. And if you do...it's going to be very slow to heat. You may need to stick to single coils until you can get some 32. If you're in the market for a cheap...
  16. Crash Moses

    I keep building sub ohm coils.. ;(

    jclay, just posted some info for you in your other thread. Here it is again::) Here's a nice short video by Super_x_drifter that should help you get started with micro-coils. The video is specific to the RM2 but the same techniques work with most rebuildable drippers. REO grand - Getting...
  17. Crash Moses

    Igo-w Dual Coil High (how to get 1.8-2.2 ohms while rocking 2 coils?)

    Here's a nice short video by Super_x_drifter that should help you get started with micro-coils. The video is specific to the RM2 but the same techniques work with most rebuildable drippers. REO grand - Getting Started Tutorial - YouTube Silica is a royal pain to get through a micro-coil (but...
  18. Crash Moses

    Issues with Vape FX?

    Yes, please let us know how it turns out.
  19. Crash Moses

    Issues with Vape FX?

    Just saw this on their website.
  20. Crash Moses

    Just Curious... Skin For ProVari

    Your best bet is to contact them via their website to see what the requirements are. They likely vary from device to device. That said, I've purchased four standard wraps from J-wraps and couldn't be happier. The wrap on my Provari still looks like the day I put it on (although I rarely use...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu