Search results

  1. Crash Moses

    New Reo owner, questions

    No worries...ya just need to experiment to find what works best for you. For what it's worth I was never able to get a standard 4/5 wrap silica coil to work well in the Reo (not that I put much effort into it...lol). Throw the same coil in an IGO-L though and it rocks. I've found getting the...
  2. Crash Moses

    Cyclone RBA Nirvana

    Yes, you have to specify bottom feed when you purchase normally. You can kinda see how high the feed hole sits here in this picture. I haven't had any drainage or flooding issues. When I coil it for my Reo I use the upper hole but when it's coiled as a dedicated dripper I use the bottom hole...
  3. Crash Moses

    Anyone drill out their RM2? What is your sweet spot?

    I try to get the coil smack dab in front of the hole (use a sharpie to mark the position) as close as I can without running the risk of shorting to the cap. That said, closer to the hole increases the tightness of the draw and further away lessens it. Closer to the hole and I get gobs of vapor...
  4. Crash Moses

    Public health announcement...

    Did you get all the eggs out?
  5. Crash Moses

    New Reo owner, questions

    Have you tried building a micro-coil with the silica? It's tricky but can be done. It may be a little more difficult with the 32 awg though. I recommend some 30 awg with 10-12 wraps on a 1/16 drill bit (for your cooler vape). Should put you around 1.5 ohms. I've had some success pulling the...
  6. Crash Moses

    Question about my AW 18490

    Try it in another gadget if you have one. It may just not be making a good connection...trying cleaning the contacts...could be a little corrosion.
  7. Crash Moses

    Public health announcement...

    And the worst part is...it laid eggs! Ahhhhhhhhhhhhh!
  8. Crash Moses

    Rob, You Are Brilliant!

    So...did you say "WOW!" the first time you fired it up? I did. Three times in a row. I'll say it again. WOW!
  9. Crash Moses

    Cyclone RBA Nirvana

    That's how I do it...then you can fire them bad boys up and it looks like an evil robot comin' to getcha! Oh yeah... Evil robots are awesome! And good robots...robots in general actually...
  10. Crash Moses

    Cyclone RBA Nirvana

    No...I have a Cyclone so I know how far down it sits. I was wondering if you had to do anything in particular to get the AFC cap to sit firm...such as not screw your atty down as far. Moot point though...I have an untumbled raw just screaming for turbocad6's modification. I believe that's my...
  11. Crash Moses

    One thing leads to another -- and another ...

    Yeah, but I really think the ceramic base of the RM2 gives it an edge over the others. Considering its origins I'm a little surprised but for use with the Reo I think the the RM2 is top porcupine. (That said...my Cyclone with dual coils and AFC...OMG).
  12. Crash Moses

    Anyone drill out their RM2? What is your sweet spot?

    I have one drilled out to 1/16 and the other two are stock. I like the draw on both but I've found that coil placement affects the draw quite a bit so I think I'm going to drill out the other two to 1/16 to give me some flexibility.
  13. Crash Moses

    I think I jinxed myself

    I parked my car at the end of the driveway and did some maintenance while I waited for my last one. Figured it was better than standing out there like an expectant father.
  14. Crash Moses

    Cyclone RBA Nirvana

    I have to agree...they're a PITA. I've already stripped one trying to scrunch down some Rene 41 wire. Would much prefer standard Phillips head screws. lol...I meant with the AFC cap on. Or were you making a funny?
  15. Crash Moses

    Cyclone RBA Nirvana

    I tried that with mine and it just falls right off. I've tried different sized o-rings and dental floss. Do you screw the Cyclone all the way down? That's all I use with my Cyclone (w/AFC). I've never been able to get the performance out of the Cyclone like I have the RM2...even with...
  16. Crash Moses

    Repainting a Reo

    That would be me...and, no, it didn't work out very well. It held up good for about a week and then the corners started to go and then around the door (gave it a pretty cool look though). Not that it couldn't be done but I think one would have to put more than the five coats I laid on (and...
  17. Crash Moses

    REO + favorite gadget you can't live without?

    A year ago it would have been my coffee mug...but now...it's my water bottle.
  18. Crash Moses

    "OK, UNCLE" . .. . gave up and put a CIRCUIT BOARD in my REO too!

    Dang...and I thought gluing stuff on the front was creative... Now...where'd I stick that durn Dremel tool?
  19. Crash Moses

    Grand finish question

    That works for breaking in new coils also.
  20. Crash Moses

    Grand finish question

    Textured wraps also. I spoke with the owner at Vape Stock and if you e-mail them they'll provide whatever design you like.
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu