Search results

  1. davewuvswaffles

    Where to get a Cartomizer and Atomizer Ohm Meter. Its sold out everywhere!!!

    There's also the groupbuy on Congrevape that is almost sold out. They had 250 set aside and I think ~220 are taken, well as of last night.
  2. davewuvswaffles

    Best of the best RBA?

    I can't put down my Reomizer 2 at the moment, but I'd tip my hat towards the Aios T/D and the Kayfun 3.1. Aios T/D - Beautiful, puts out a cool vape, and convertible between dripper and genny mode. Kayfun 3.1 - Top fed RBA, great aesthetics that complement so many tubes, adjustable airflow.
  3. davewuvswaffles

    Looking for new device under $500

    Whoops, double post.
  4. davewuvswaffles

    Looking for new device under $500

    A Kick is a little module that you can drop into unregulated mods in order to turn it into a VV/VW mod. The Kick 2 recently came out and can do a bit more. You can read about it: Our Products « Evolv A Caravella is an extremely expensive mechanical mod made in Portugal. They were a limited...
  5. davewuvswaffles

    Looking for new device under $500

    $1000? How about this for an idea? To start off, grab a Reo Grand or Reo Mini 2.1, Reomizer 2, a Kick 2, some LR cartos, some batteries and 28 gauge Kanthal. You get the awesomeness that is a Reo, the ability to turn it into a VV/VW, AND all the gear you'll need to get started in...
  6. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    I just use the Panasonic CGR18650CH's that I got from FT, which I believe are 2250 mAh. And for your second question, I think a better way to look at it might be looking at the Wh (Watt hours) since you're using it at a set voltage. For your 5.5v, 3.0 ohm setup, you're drawing 1.83... amps...
  7. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Stacked batteries won't double the battery life or amperage (not that the amperage applies in your situation), IIRC because they're in a series rather than parallel. So in essence, you're regulating 8.4v (at full charge) down to 3.6v, getting the same amount of battery life as one battery at...
  8. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Sweet, I just ordered 100' from TemCo. I know you said not to order a lot, but I figure if I like it, I've got enough to last me forever, and if I don't like it, I'll just throw it in a trade or something. Not to mention, the price was pretty negligible from 25' to 50' to 100'. Should be...
  9. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/320042-resistance-wire-kanthal-nichrome.html This thread seems to be a good one. http://www.e-cigarette-forum.com/forum/modding-forum/198826-kanthal-vs-nichrome.html...
  10. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Hmmm, 28g Nich might be a good option too. I guess I'm down to either 28g Nichrome (4.25 ohm/ft) vs 26g Kanthal (3.31 ohm/ft). I wouldn't mind having to make 10 wraps, which if my calculations are correct, would land me around 0.7178 ohms with the 26g Kanthal (this is based on a 7/6 wrap being...
  11. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Damn, that's pretty nuts. Looks like it'd be 15 wraps just to get to .6 ohms. I'd love to go .4 ohms but I don't want to test my 18490's. Might have to go with 26g then, it's closer to R41 in resistance/foot and use my 28g for dual coils in my Trident (whenever it decides to get here) and in...
  12. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Ok I need to try some new wire even if I've got like 70 ft of 28g Kanthal left, but I want to play with some lower resistance Kanthal (and build a wrapping device) before I try R41. 24g or 26g Kanthal... not sure which one to buy. Aiming for .6-.8 ohms on my RM2.
  13. davewuvswaffles

    Your vaping device Ladder

    Over the last three months in order of purchase: GS Sub 2.0 + Protank Ego-C Twist iTaste MVP + Igo-L Sigelei #13a + Igo-W Chi You clone Reo Mini 2.1 + Reomizer 2 I don't think I'll be buying anything but Reo's from now on. I've got a Trident and Russian 91% on the way, but they'll be...
  14. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    Definitely increase the airhole size. Possibly try rolling the cotton into a wick as well? I've never used it unfurled like that, so I'm not sure if the capillary action is being limited.
  15. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    I'd offer to buy some off you, but I can't imagine shipping from down under to be cheap. Maybe you could try letting off before the end of your puff so that you keep the air flowing as it cools down?
  16. davewuvswaffles

    Micro Coils to increase Vapor, flavor & TH

    My first micro on a RM2, 7 wraps of 28 gauge metering in at 0.8 ohms. I think I want to try that R41 or Nichrome 26 gauge soon though...
  17. davewuvswaffles

    I don't understand and am not gonna worry about understanding it but.....

    USPS GAVE ME AN EARLY PRESENT!!!! First few puffs: hmm very nice. Next few puffs after that: no way... Last few puffs: what is this sorcery???? Conclusion: REO is a wizard. I'm on to you.
  18. davewuvswaffles

    I don't understand and am not gonna worry about understanding it but.....

    Dude you've got me so excited to get my Reo now. My Mini 2.1 and RM2 both got shipped yesterday, from Arkansas and Maine respectively, and were both scheduled to be delivered on Saturday. Well I just checked the tracking, and they're already in Philadelphia. I know that the Philly sorting...
  19. davewuvswaffles

    chi you clone from hcigar is this a complete replica?

    Were the serial # and part that says chi ou cheon wang as hard to sand off? They feel almost printed on in comparison to the dragon logo.
  20. davewuvswaffles

    Chi you clone

    Just got mine in. Verdict: Pretty damn good. Threads are nice and smooth, the main logo has a nice feel to it, the adjustable pins work as advertised, and it hits pretty well even with the brass pins. The only negative I can really give this is that the back etching isn't as deep as the...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu