Search results

  1. Jeremy Evans

    Is kanthal ribbon worth it?

    I have some ribbon wire at home .8 and .5, but to be honest I don't really like it at all, not on any wick material SS, cotton or ekowool. It's just a PITA and even when setup it's not that great, much better results with standard wire
  2. Jeremy Evans

    Is kanthal ribbon worth it?

    I looked everywhere at CVS yesterday and couldnt find the "super .....in wickin" edition rolled cotton. SMH, I was so dissappointed:D
  3. Jeremy Evans

    Twisted/braided wire question

    When I wrap ss I use 2 strands of 30 and it makes awesome vtf, it heats up quick with zero lag. I am also not using VV so I can go lower but I had it that way on my evic too just more wraps. Make sure you have adequate wicking. Normal hollow wicks might not be able to keep up when you crank it...
  4. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    After asking and then actually thinking about it, I figured it out. Guess I had a taking care of a screaming baby moment. Lol Actually drilled the outer 2 hole to 1.6mm, huge difference in vapor and flavor. I just thought is a fog machine before. Actually got kicked out my living room by the...
  5. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    So what would 2, 1.6mm and 1, 1mm hole equate to ? Where can I find this on my own is there a formula to figure it?
  6. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    My initial thought was to just enlarge the outer 2. I have 2 of them so I might do that to one and then cut the other in half and make 2 new holes, 1 on each side
  7. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    My bad stupid phone and late night posting. Lol. The 3 airholes are about .8-.9 mm each. While it is an airy draw it doesn't seem like it is that close to 3mm total. The second part I was saying I am thinking about hacking the Atty up to shorten it and get rid of the 3 holes on 1 side. They...
  8. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    So I measured them and they are just a hair under 1mm. But it honestly does pull like a 3mm hole would its airy but not that airy. I actually measured how high the post were and where the 3 airholes height was I am thinking about having it in half to remove the 3 and drill one on each side.
  9. Jeremy Evans

    Twisted/braided wire question

    about that, Vapelyfe posted up a pic of twisted "bakero" wire today around some ekowool. Not sure why they are still calling it that when we all know what it is
  10. Jeremy Evans

    Dual coil setup for IGO-L or Smok RDA?

    I'm going to assume it's from some NET bacco juice
  11. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    not sure I haven't measured them, I will tonight. There really isnt a need for it, I am tossing up the idea of enlarging the 2 outer holes, just not sure if it will be too much though, smallest drill bit I have is 1/16 at the moment Just looking at them compared to my IGO-l which is 1.6mm they...
  12. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    Todays fog machine. So I got 2 chimbus atty from a Coop and they had 3 holes on 1 side like below. Most people would be mad but not this guy and his new found love of all things micro, so I grabbed some 28 gauge and went to work Came out to .6, did some test fires to make sure they were...
  13. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    8 -9 wraps usually around .8 or .9
  14. Jeremy Evans

    Micro Coils to increase Vapor, flavor & TH

    I'm running a SLR micro coil out of 26 gauge wrapped on a 1/16 drill bit with rolled cotton. I have tails on both sides one goes behind the coil against the post and the other around the back of the post on an IGO-L. I'm redripping every 30 minutes or so about 10-12 drops. Never a singed wick...
  15. Jeremy Evans

    rsst?

    Ecto cooler is a known tank killer, it even says not to use it on their site, atleast it did. It is a citrus based juice, that could be the plastic taste. I wouldnt use it in the RSST, get an AGA T or something with a pyrex tank
  16. Jeremy Evans

    Burnt taste from AGA-t2. Worked flawlessly for 2 weeks ? Any Ideas ?

    You could of inadvertently bumped the coil while filling and voila, you know have a hotspot you need to fix
  17. Jeremy Evans

    Are Zens worth all that money...

    Regardless of which ones he has owned, his statement is 100% true. I have had a Zen and have played with a couple others, the main thing is that you have a good wick and coil setup or else no matter how much you paid for it, it's going to suck. Unless all that extra money makes it to where it...
  18. Jeremy Evans

    C-tratech 'VRD' Variable Resistance Dripping Atomizer?

    cool idea and concept but poor execution, that thing looks a mess under the hood
  19. Jeremy Evans

    Are Zens worth all that money...

    True but some are easier to setup bc of the design of them and what not, all RBAs are only as good as the wick and coil in them. A premium one with a crap wick and coil setup will suck where as a cheap one with a good wick and coil will blow it out of the water. Typically I buy RBAs and such...
  20. Jeremy Evans

    Post pictures of your working wick and coil setup

    I pretty much keep mine dead center and then as close as possible to the cap without touching it. If the juice I am using is higher PG or nic I keep the airhole more towards the top of the coil to lessen the TH
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu