Search results

  1. Hello World

    fc-2000 porous ceramic wick

    ZAP = 7/64 ... although you could do with 1/8 and some 400 grid sandpaper. The RSST is good on 1/8, although some people have said it's a bit tight. Also, the wicks are not always uniform in size either, so keep some sandpaper nearby. Some links where you can buy these ceramic wicks...
  2. Hello World

    What's after the AGAs?

    Yep ... :)
  3. Hello World

    SmokTech RSST Genesis Rebuildable Atomizer

    Some yards will sell off the roll by linear foot ---> EPDM Rubber. Some O-rings are manufactured from it. With scissors, cut out washers for center post as well as gasket for top of PP tank and plate. EPDM is very heat resistant, and not attacked by anything in e-liquids.
  4. Hello World

    fc-2000 porous ceramic wick

    And that is another interesting question since the January wicks in my book do not even remotely perform as well as the March ceramic wicks. So are they bringing back the earlier wicks in a slotted version? I hope not, as the current ones are the best so far. That's the way I see it too. Now...
  5. Hello World

    battery question

    PANASONIC CGR18650CH HIGH DRAIN 10A Hybrid IMR Li-ion battery and AW IMR 18650 - 2000mAh are good high drain batteries. Your Vamo should be good with either of them, but you won't need protected ones. I think your Vamo with take IMR 18350 stacked batteries ... that might be your best bet for...
  6. Hello World

    battery question

    If you'll be using a mechanical, I'd definitely go with the 10 amp.
  7. Hello World

    What's the price

    Ours just went up by some 60 cents or so. Range now from $ 7.80 to 11.00 Native Reserve jobs run about $4.00 - $5.00 and are becoming quite mainstream. Every other person now has such a connection. At this rate, in 5 years, the Gov't might go out of business. Tobacco tax bankrupt. I DIY for...
  8. Hello World

    fc-2000 porous ceramic wick

    The pores of the ceramic itself serve as gaps, and juice does travel up the outside of the wick, and that flood has a thickness. In view of that, how close really does the Kanthal need to be to the wick? Do hot-wraps restrict the upflow of the juice somewhat, whereas slotting and...
  9. Hello World

    Whats your evic setup ?

    Mine almost the same. 6/7 wrap with 28ga Kanthal works very well too, similar vape, but more volume using AW IMR batteries.
  10. Hello World

    fc-2000 porous ceramic wick

    Your call. Personally I find I get a smoother vape when the coils are evenly spread out from top to bottom. But it may take a little longer to kick up the vape on 28ga Kanthal. Tight wraps vaporize the juice faster but you are also potentially prone to dry hits. Your vaping habits are your best...
  11. Hello World

    The art of RBA's and ZEN

    In my collection I wanted at least 1 single high-end RBA and opted for the ZAP. And happy with it.
  12. Hello World

    Is there a RBA that doesn't leak?

    None of my 3 AGA-T2s nor my ZAP has ever leaked. Recent higher porosity ceramic wicks allow me keep the fill screw in and lay them on their side all day long without leaking. A .6mm - .8mm space between the wick and the wickhole allow for plenty of air uptake so I don't need to remove the fill...
  13. Hello World

    MVR 1.3 Update

    With IMR batteries I had it kicking up to 2.85amp, but I can't comment whether that will do for your dual cartos or not.
  14. Hello World

    Atmizoo Roller/Dingo Chat, Tips, and Release Dates

    When a mod was sent to me from Ireland by "bOd by Leo", the only thing I paid was $6 in shipping, no VAT, no other taxes. With Atmizoo, I got hit with €20.70 VAT, €19 shipping and at this end for $47 in duties. I cannot tell you why this discrepancy exists. Obviously one can ship almost the...
  15. Hello World

    fc-2000 porous ceramic wick

    I think so. Seems to hold the juice, not sliding across. Mind you that's with the fill screw in. The wide .8mm space left in the wickhole allows lots of air in, vapes really well, but the tank's vacuum and the wick's porosity prevent it from leaking out. If I hold it upside down, then it'll...
  16. Hello World

    fc-2000 porous ceramic wick

    Interesting to note that the January wicks did leak a little when laid flat, the courser March wicks don't .... even with a .8mm gap in the hole. I used to always hold them in my hand while driving or find some other way to keep my PVs vertical, but not anyone ... I just toss them down on the...
  17. Hello World

    MVR 1.3 Update

    Doubt it, but you never know. Never go above 3.7v myself on any mod. I like VW vaping, so the volts and amps can do their thing ... power comes out all the same ... 11 watts max with the eVic. In 3 days ... 2,100 hours each. :)
  18. Hello World

    fc-2000 porous ceramic wick

    Hey Vap ... I meant leave horizontally overnight, but seeing that these slots aren't that wide, I'd imagine it would be in par with the currently available wicks as far as potential leakage is concerned.
  19. Hello World

    Attempting to join the world of RBAs..

    You cannot go wrong with 30ga Kanthal and a 12" by 12" 500 stainless steel mesh sheet. Also, ceramic wick is a better alternative to ss mesh. Gone are the usual installation headaches newbies routinely experience and the flavor tastes are second to none...
  20. Hello World

    fc-2000 porous ceramic wick

    The newest ceramic wicks released in the latter part of March are Ok, they don't have that stone or concrete taste anymore, nor do any of them have that SS harshness. Ceramic wicks are an evolving adventure, and it keeps getting better all the time. The more people get on board, the harder the...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu