Search results

  1. Hello World

    Joye eVic

    1,500 hours --- reinterated !!! Each of my eVics.
  2. Hello World

    Joye eVic

    I have both, and there are no regrets either way. I have (2) two eVics now going on to 1,500 hours each without a hitch, and have more than proven themselves to me and I consider them good quality devices. If you are an 11 watt+ vaper, go with the Provari. Below that, they perform equally well...
  3. Hello World

    Straw vs Solid vs U-Wick

    In either case, I usually find I have to tip anyways. Since solid wicks hold more juice I rarely run into dry hits.
  4. Hello World

    Bubble baths and vaping?

    A couple safe measures I can think of. 1. Make sure you have good ventilation so excessive condensation does not build up in your PVs battery handle. 2. Suspend with lanyard from curtain rod only down so far so your PV cannot accidentally fall into the tub.
  5. Hello World

    Leaking vivi nova?

    I bought 2 Vivis (the genuine OEM ones) ... they both leaked, only used them once. For the metal tank anyways, you can try this: PTFE tape available in most building centers. You'll have to fine-cut the tape with scissors and is a bit of a hobby-type project. 1 wrap turn will do. So far, every...
  6. Hello World

    drip tip recommendation for ZAP

    The Brushed Stainless Steel Ming was recommended to me by Provape to match the ZAP. And it does.
  7. Hello World

    Battery Question Flat-Top Vs Button Top

    I use AW IMR button tops with my eVics. Better drain, performance, less overheating than the flat-top Li-ions that came with it when running higher loads such as 30ga Kanthal RBAs.
  8. Hello World

    Provari 3.0?!!

    Yup, Innovation is pushed by consumer demand, not defending any status quo. We all want better products. Local meets with tons of vendors sell eVics ... at least 100 people attending, and you'd be hard-pressed finding more than a couple guys holding a Provari. Many also do not frequent ECF...
  9. Hello World

    Looking for a rec on a mod to use with genesis atty

    Personally, and everyone has their own sweet spot, I like around 1.7 - 1.9 ohms and vape at 3.7v. These settings remain the same for me regardless what gauge wire I use. In each instance I get what I could characterize as more horsepower, a more voluminous vape, but the quality of the taste...
  10. Hello World

    Looking for a rec on a mod to use with genesis atty

    If you wrap them with Kanthal 32ga and keep the coil resistance above 1.5 ohms, pretty much any APV should be able to push it. They don't take much power. Depending on your vaping preferences, many will do 30ga as well. If you get down to 28ga, then more power is required and a mechanical mod...
  11. Hello World

    About to buy a Provari V-2.5 BUT! ...

    It's probably a good place to discuss it, since the OP had that query. I've never had a Lavatube, so I can't comment on it much. I don't believe the original is still sold, but the v2 had an OK review on it by Busardo. Lavatube 2
  12. Hello World

    About to buy a Provari V-2.5 BUT! ...

    Provari Witnesses out in full force tonight. Cheap shots like "Chinese Junk" ... Nothing wrong with a Lavatube.
  13. Hello World

    where is east side vapes

    Chinese folks, a young couple, sell at local meets.
  14. Hello World

    where is east side vapes

    Vancouver, Eastside You'll have to e-mail them (on their website). Not a public B & M. You HealthCan federalie? And if RevCan, you should know nobody pays any tax down there.
  15. Hello World

    Provari 3.0?!!

    I'm not faintest bit interested what Provape brings out next, as they are a low-innovation and status quo based company. Joyetech are the guys to watch. The eVic has only been out for a few months and is already by leaps and bounds the all-time APV top-seller.
  16. Hello World

    Newbie looking for advice/experiences with quitting analogues

    Good indicators ... :toast:
  17. Hello World

    Canadian Supplier for LAVATUBE 2 ???

    Google ---> lavatube 2.0 canada also ---> http://www.e-cigarette-forum.com/forum/canada-forum/336714-where-find-young-june-chrome-lavatube-2-0-canada.html
  18. Hello World

    About to buy a Provari V-2.5 BUT! ...

    Not to me. It's user choice. No, just vape away. You don't need to worry about that unless it's hauling heavy loads such as 28ga Gennys. You set it, then vape away. Not complicated. No VW on the Provari, voltage only. Voltage only, no wattage. It's not complicated. Buy whatever device you...
  19. Hello World

    Evic battery help

    Keep in mind this observation does not eliminate the possibilty the Flash-job is bad or the control head might be damaged. You will need another battery to accurately test by comparison. This is not the Samsung OEM supplied battery. Many vendors sell a Sanyo after-market one. Post a link to...
  20. Hello World

    Evic battery help

    You may have a defective battery, misfunctioning control head, or contacts in need of cleaning. Here's what I would try. 1. Clean all contacts, not just the battery ones, but also all points of the control head. Perhaps some previous leaking juice coated a contact. 2. Try another battery and...
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu