Search results

  1. 0

    vv/vw mod that fits my needs, suggestions needed

    ok guys I have a situation and I could use some help. I want/need a vv or vw device that uses at the bare minimum a 18650 battery. However besides the battery cap it needs to be as fluid resistant as possible and as small as possible. It also has to be tough enough to be laid on sat on and...
  2. 0

    Is anybody willing to actually help me? Please

    the low vapor and harsh hit sounds like your airhole isn't directly in front of the wick. My aga hole was a bit off at first. the cap all the way tightened down was about a quarter inch off to the right. after a few days worth of taking the cap on and off the oring broke in and now full tight...
  3. 0

    aga-t+ poor wicking with screw in fillhole

    recently got mine working and noticed that the first setup I had wicked a little bit slowly. so i loosened the fill screw like a quarter turn and wicks like crazy again. will only leak a little bit very slowly so no big deal leaving the screw a bit loose. Also I rolled my wick out of an L...
  4. 0

    got the aga-t+ going (finally)

    Getting my aga set up was a PITA!!! literally probably coiled and recoiled at least 15 times cause i kept popping the wire at the pos post connection trying to adjust the coils for hotspots. after about 20 minutes of trying to adjust each one the wire just gives up the ghost. took me about 4...
  5. 0

    new to forum lots of questions

    Thank you. With my vaping aparatus it honestly wasn't all that hard for me....although this thing has become a permanent attachment to my hand. Don't know if thats good or bad.
  6. 0

    new to forum lots of questions

    I was vaping it at 4.1. which seems to be my sweet spot for all low resistance stuff. Just tasted like i was smokin burning steel wool. at least that is what i would imagine steel wool would taste like if you burned it.
  7. 0

    new to forum lots of questions

    So I made some progress today finally. Got some wire from a buddy and added a washer to the positive post and finally got rid of the top coil hot spot. began adjusting coils as required and hot spot moved to the bottom coil. was able to work out that spot and finally got the coils all nice and...
  8. 0

    new to forum lots of questions

    ......ok I feel like a ..... right now...... turns out I accidentally ordered nichrome wire not kanthal. I got my wire orders mixed up and am still waiting on my kanthal. that being said every coil I've wrapped has probably been around the .5-.7 ohm range. obviously not at all what I want...
  9. 0

    new to forum lots of questions

    but I don't want to go back to 2!!! I keep playing with this thing and still can't seem to get it right. Near as I can tell I think my ohms are way to high causing the small gap between the top most coil and the positive post to be the weakest link. Since our batteries regulate power and...
  10. 0

    new to forum lots of questions

    post 5.....SUCCESS!!!!
  11. 0

    new to forum lots of questions

    post 4 gonna get to 5
  12. 0

    new to forum lots of questions

    post 3 gonna get to 5 lol
  13. 0

    new to forum lots of questions

    I tried pulling the wick out and re oxidizing it thinking maybe it didnt have enough carbon but thats not it. tried 7 wraps came out to 7 ohms still popped first hit. twisted the wire and recoiled with 3 wraps. didn't pop but the coils won't red red hot and the hit tasted like ..... went...
  14. 0

    new to forum lots of questions

    Alright first post here guys. Been doing this vaping thing now for about 5 months. quit 2 packs a day of Kool 100s green box cold turkey after 12 years. pretty happy about that. So far Ive tried a bunch of different tank systems. carto tanks, clearos, including the kangers t2 and t3 and...
  15. 0

    04stinugget

    Blog by 04stinugget
Top Bottom
Forums
Products
Vaping.com
Star Suppliers
Blogs
Menu